Did not know could swap wiper arms from like Chevy to a Ford. Learn something new every day. I appreciate it.

Good deal ty

Wascley wabbit!

He just takes stuff! My 38 youngest son took a new finish DA sander from my garage still in the box. Took it home and I had to ask. He said he would bring it back in February or March. Maybe I will get my $300 full face helmet back he claimed was his. I bought it with last new motorcycle. The only ghost I have here are my SnapOn tools.

Works great, thanks so much for posting. Recently bought 2002 1500, drained the oil but then couldn’t get the filler cap off! After watching video, removed the filler tube and was able to get the cap off of it. Cleaned everything up but the cap is still a little difficult to remove but now I know it’s a half twist and pull. Keeping the tube off to just use when adding oil. Saved me from breaking either the cap or the tube or both!

Thanks man!

LS uses an internal balanced crank. Gen1 is externally balanced! I fixed cars but didn’t build them and I never knew until I re-freshen one. They also balance the rotating assembly on the end weights only. I watched some machine shop videos from Powell Machining. This guy is good and has his own shop in South Carolina. PS, I have to check if paw paws will go this far North in Omaha. I am not too sure!

So we shouldn’t worry about the Metal you’re grinding off of the bolts going down inside of the engine you have there all unprotected?

How about another cooking video?

Epic video dude!

Does anyone know the torque spec on the face plate

Should i let go of my 2004 endeavor if the shifting is bad? Sometimes it would delay shifting from park to drive or reverse. I was told the atf was changed already. It only has around 56k miles

700r4 I ran out of fluids while driving now it won’t shift out of 1

Your engine is a long crankshaft engine it has a .500 longer crankshaft stick out I’m not certain this actually works on a 01 + engine

Very good and helpful video! Like Ronald said very helpful that your doing this in a running vehicle.

Hey, please check your email or spam folder Tatts 4 Life. I have a car issue.

I really appreciate this video so much. It gives me hope. I have a 20 gallon fish tank that currently houses only 2 fish now. The conditions of the tank have gotten horrible and i need a replacment, but i dont have money to buy another tank. Seeing cheaper ways that other people are using and supporting makes me feel 10x better about what my next step will be to make my last fish happy again

Well done video. Just a suggestion from a 30 + year broadcast television production tech, you really need MORE LIGHT in your shot on the table. old adage: Television without light... its RADIO! best of luck

are you working on your moe's review yet?

Ty buddy I have the same issue on my 86 k5 blazer,,I think I can do it now

Paw Paw’s are one of these items few have heard ok. They are found in NE Kansas and parts of NE. Working for a neighbor farmer, his mother served “Goose Berry” pie. This fruit looks like a green grape and grows on a vine in fence lines. Like a Strawberry - Rhubarb pie that a little sugar helps with the tartness! Either way, just great eats and vegetarian friendly. I have no clue if they will grow north into Omaha, NE area. I will have to investigate then get some seeds from you! Thanks kindly for sharing.

I have a sound like this, already change the timing belt tensioner and a pulley and this sound came up sfter the replace byt i think something damage because the belt got off time while driving on the highway and had to get it tow badk home and after fixing is making a spund pretty similar to this one but is only when it gets hot and my mechanic told me i had to change the lifters

It's from Advance auto parts! Wonder why!

Avoid *real* BTR lifter trays, i order them straight from btr and one of them shattered and ruined my cam and lifters. I knew they were shit putting them in. BTR should know better than putting in shitty thin abs.

Where did you put regulator and return line?

Do you happen to know what size resistor is used

Are you the people Tom segura told us about? I appreciate the video by the way.

My v1 dualshock is not working anymore I have checked the battery has down and I've bought a new battery but joystick didn't get any power . ı've realized that ribbon cable has broken i just wonder something about this situation.Battery has got charge but I don't know if the battery full charged or has power in it, why the joystick is not opening? Is that because of broken ribbon cable?

I have a printer but not a 3D printer and what happens if it just one of the parts are broken like it's like cuz like I let my cousin play with this so she broke my controller can you come fix this for me

Sand it down lol

Love the 3rd gen videos they been helping me with my swap.

replacing my thermostat on my 96 chevy camaro previous owner has a paper gasket along with the rubber gasket on the thermostat itself. Didn't the rubber gasket replace the need for a paper gasket ?

So why aren’t all the rods bent or pushing through the rockers if the lift is too much? Cheers

2:51 ALLLL of the red loctite lol

Thank you !!

Are those -10AN fittings that screw into the rails?

Do you have a video on ac compressor removal

The worst! Just did this and that it way too deep, he didn't even check for wobble on that thing just randomly hammered on, a 1" deepwell completely lines it up perfectly, that was nooooooo 1" and "dwat siwicone", will just make it all fall off and fall apart.

Video too dark

This'll work for me, I changing manifold and carb, thanks

Literally the ugliest suv ever mmade.

It's bee a long time since I've seen a "Hold my beer, and watch this" that was this terrifying, lol

Do I hear banjos in the distance....?

Great vid ! I was wondering can you reuse rod bolts ?

I have seen many people not using common sense to move machines. I have seen someone flip a bridgeport, busting the casting trying to move it improperly, machine scrapped. Seen pictures where someone was pinned under one. I have had to move machines via some sketchy methods, you stay in shops long enough you will have to. But I cannot stress enough that pallet jacks are the WORST thing to move a mill with. Forklift, bobcat, or tractor with bucket forks under the ram (with blocks of wood) make moving them so much easier and safer. Just have to tie it off to the machine and take it slow. I am glad to see you didn't end up hurt trying to move that thing.

I recently had to move a Bridgeport from a basement, up a flight of stairs. No fun, had to use a Bobcat teleboom and skid i up. Fist I removed the head unit and the table, made it a lot lighter. Used a engine hoist to do that. Also when we loaded it on the trailer we used forged lifting hook screwed into the top of the ram. To get it across the garage floor we rolled it on 4' pieces of 3/4" pipe. The way the riggers move them is with a fork lift putting the fork tines under the ram straddling the base protecting the ram keyways with chunks of wood. When we got it to it's new home we used a heavy duty engine lift to put it back together then rolled it into place with the same pipes as rollers. Sketch AF but it worked.

No actual prepping in video just a soy beta male

Its not sticky

Yeah this was a life saver, I fought these damn doors for 2 days!

Can this be used to go straight to fan relay