6ixGarage

Пікірлер

@diazjuarezgeovannijesus 10 күн бұрын

I have the P12BA error on my BMW 325i, what could it be?

@6ixgarage 4 күн бұрын

Check your intake for leaks and clean your map and maf sensors

@NeedForWalkthroughs Ай бұрын

So this could potentially fix harder steering to one side?

@6ixgarage Ай бұрын

@@NeedForWalkthroughs ya it worked for me

@dbreezy7630 Ай бұрын

Crazy that it worked ❤️ respect mate

@delica17 2 ай бұрын

Music not needed please...

@tm5346 2 ай бұрын

Thank you for sharing & explaining on your video!!! I hope this works! Most greatful

@TheCobratebra 2 ай бұрын

🎉🎉🎉 works u saved me man gracias

@Unattached1 2 ай бұрын

hey man, was just wondering how this case has been. my stock one unfortunately cracked aswell and just looking for a fix

@robedge7670 2 ай бұрын

Hi there, my angel eyes just stopped working when the light switch is the 1st position. But they come on when moved to the 2nd position with the low beams! Any ideas? Thanks

@6ixgarage 2 ай бұрын

Likely you’ll need to turn them on as day time running lights using coding. Use Carly or similar BMW coding softwares with the appropriate dongle and you can activate the angel eyes as day time running lights. If they worked before, you may have hit the max fail counter for angel eyes (basically the frm thinks the lights are burning out). You can also reset this counter using protool and then your angel eyes should come back on.

@robedge7670 2 ай бұрын

@@6ixgarage thanks for this. I tried that on my Carly, but no luck . I didn’t get to check the drivers side bulb but the passenger one definitely works. The lights are only 1 year old and are Valeo units. The car is a 2008 pre LCI one but fitted with LCI lights front and rear. Bulbs in them are the original halogen type that came with the headlights. It also comes up with the dreaded fault codes of A8AC and A8AD. I have a launch diagnostic tester too which will allow the short cut reset I read about but it doesn’t say complete or anything once activated. My Carly doesn’t have this option

@6ixgarage 2 ай бұрын

I’ve found that only protool resets the short circuit count outside of inpa. Carly wasn’t able to reset it for me. In Carly though, can you confirm the coding for drl is set to on and then set to angel eyes? Additionally, I’ve found in some instances that you may have reset coding to factory and then try turning them on again. The frm module controls all this so resetting it sometimes does the trick

@robedge7670 2 ай бұрын

@@6ixgaragetried that. The DRL’s are now on and the error flashes back up in the dash. Running a diagnostic test gives me 2 error codes 00A8AC and 00A8AD. Same as before both side marker bulbs are working fine. The car is a pre LCI model but I changed out the front and rear lights to LCI. The angel eyes were working as normal on position 1 up to last week! Now they only work on position 2 with low beams. No other errors for the car. Very frustrating. I’ve had to postpone my NCT (Irish version of MOT) as it will fail on this. Any suggestions much appreciated.

@atsystems1 2 ай бұрын

My Wife's E53 steering was hanging at about 90° left or right turn. Hosed down the steering column u-joint with silicone spray = All fixed up. Thanks for the insight!

@aliakkache 2 ай бұрын

What’s the music for???!? We barely hear anything!

@6ixgarage 2 ай бұрын

I’ve taken that into consideration for future videos. It seems on my end the music volume is low and for some people it’s fine as well. However for others the music is louder than my voice.

@thatonekid4963 3 ай бұрын

Bro what usb to obd cable is that do u have a link

@6ixgarage 3 ай бұрын

@@thatonekid4963 yea google procon bmw to usb k+dcan

@gonzalozepeda2596 3 ай бұрын

Como puedo obtener una version en español?

@6ixgarage 3 ай бұрын

@@gonzalozepeda2596 sorry I don’t have it in Spanish

@elborrego88 3 ай бұрын

Will this work on manual trans?

@6ixgarage 3 ай бұрын

Yes, give it a shot

@Itsillmobhoe 3 ай бұрын

The idles go up and down right? Almost on limp mode

@6ixgarage 3 ай бұрын

That’s right, once I reset using the method in the video it was back to normal.

@Jose-vv7bb 4 ай бұрын

I got an e36 328i 1996 about a month ago, the radio wasn’t working so I figured I’d swap the unit, but I wanna say Friday night or Saturday night I was driving for like 2 hours and it came on, I put in the code was messing with it , no audio and then eventually the buttons stopped working and then today I turned it on and the radio was playing but after a while the buttons stop working and I just figured to do what you did which is swap the head unit

@6ixgarage 4 ай бұрын

@@Jose-vv7bb the radio is doing well. I swapped it already. It wasnt hard to do at all

@Jose-vv7bb 4 ай бұрын

How’s your radio holding up bro ?

@NorthernChev 4 ай бұрын

I have to agree with him here. On my E46 resetting the Adaptation with the tool would often only serve as a temporary fix before it would return. Resetting the throttle using this method has given me better results over the last three years. Using the tool I would have to reset my car a minimum of once per month. Using this method I get about a year out out of it(ish). Not sure why. This is my experience with my BMW. Your mileage may vary… EDIT: Sometimes the Adaptation using the tool was so frequent I would simply drive with the tool plugged in all the time and would drape the cord over the steering wheel. …BMW lyfe.

@OfficialCclearblue 5 ай бұрын

Bout to do it… but one thing most people don’t clarify, do you push the pedal all the way to the floor including the button at the end, or just up to the extra button… might be a stupid question but always wondered what that even does!?🤔😬 lol

@6ixgarage 5 ай бұрын

Yes push all the way till you feel that button press. On auto cars it kicks the transmission down 1-2 gears for quicker acceleration.

@jasell6535 5 ай бұрын

Is there anyway to replace those amber corners with some sort of white led bulb?

@s-2742 5 ай бұрын

Thank you so much this video helped a ton

@ahmetoguz3835 5 ай бұрын

Could you please reply? There is a crack in the tower of my vehicle. I couldn't find any OEM parts. I found it from a specially made piece called garagistic. Do you think it will be useful? Which one should I use?

@jpbuilds5 7 ай бұрын

Great info dude! looking to run the same cover on my 325 convertible drift car :)

@6ixgarage 7 ай бұрын

Happy to help

@gsgtaco 7 ай бұрын

This video is a lifesaver Just curious, why can’t you spray from above vs. using the big straw?

@6ixgarage 7 ай бұрын

I couldn’t get the perfect angle for both the joints so I did it from the front

@A-GoldenBar 8 ай бұрын

Any over heating issues?

@6ixgarage 8 ай бұрын

None, this was a great upgrade.

@henrymandoza9665 8 ай бұрын

Code P112F - i did this for my 2017 bmw 740 and check engine went away, thanks!

@sipmeister3611 8 ай бұрын

My throttle body harness sepewrqted tried this and no luck looks like I’ll be dealing with electrical repair it doesn’t pull codes up only pulls misfire codes

@brandonsookhoo1515 8 ай бұрын

I have a question do i need the diagnostic or coding package to reset my halos ?

@6ixgarage 8 ай бұрын

I’m uncertain on that because when I purchased the tool, it didn’t have the two options. I would reach out to them directly, they also have a Facebook group so you can ask questions.

@gl5009 9 ай бұрын

Just bought them for my ram 1500, cant wait to try them :) Any comments on 1year of use?

@6ixgarage 9 ай бұрын

So far so good, although on my bmw the warning light still comes up telling me they are faulty. I need to put an error canceller in place but otherwise no complaints. They are bright and I’ve had no issues!

@gl5009 9 ай бұрын

@@6ixgarage thanks man

@JudyBwalya-z8n 9 ай бұрын

Can the throttle reset work on bmw x3 2007 with m54

@6ixgarage 9 ай бұрын

1 Place key in ignition and turn to detent 1 and count for 10 seconds ( only position 1 do not start the engine. ) 2.Turn key back to 0 position and count for another 10 seconds 3.Now turn the key all the way to detent 3 to start the engine

@BOA-ROMANIA 9 ай бұрын

Not for e46. They are different

@ruelbautista9966 9 ай бұрын

My code pop up 107001 is that the same thing too

@dave63864 9 ай бұрын

Can't wait to drop the automatic out of mine personally. I learn the car not the car learn me. Another reason why manuals are better.

@jf269 7 ай бұрын

Just got this error after my manual swap. Just so you know...

@bennischuran2692 9 ай бұрын

E81 116i Driver Here. My Problem was that i reset the Adaptations bcs the car was running bad and every time i turned it on it would give me Check engine light and the idle would wiggle between 1.2-1.5 k. This helped a lot thanks.

@kevingronemeier6954 9 ай бұрын

I very much appreciate your video. One thing that I didn’t like though, is the music. You are talking about a complicated topic and the music is practically drowning you out and it’s super annoying because I know you are a very intelligent guy that I wouldn’t mind listening to.

@kevingronemeier6954 9 ай бұрын

Remove the music all together, or add some subtitles so we know what you are saying. You are talking about removing and replacing and lubricaring, but in don’t know what you wanted to remove or replace bale cause the music is just too much my friend. Just a suggestion. Thanks again for your video, I do appreciate you taking the time to share with us!

@6ixgarage 9 ай бұрын

@@kevingronemeier6954 thanks for the feedback, I’ll definitely keep that in mind going forward.

@KS-pf6iv 10 ай бұрын

It really worked… thanks for the tip

@vithor9915 10 ай бұрын

If we disconsider the internal ring that fits into the hole in the strut tower tower and the external ring that is underneath the OEM reinforcement, is the rest of the plate flat? I have the impression that the oem has a very big radius, while the Garagistic one is a flat plate, this gives me the impression that the original has a better fit, distributing the force over a larger area and consequently causing less stress on the tower . I didn't find a photo that shows a frontal view of the oem reinforcement, and I've never seen this part in person, so I can't confirm if this radius actually exists.

@vithor9915 10 ай бұрын

As far as I remember, the oem top mount also has a big radius, is not exactly a flat surface, so it makes sense if oem reinforcement also came with this radius.

@6ixgarage 10 ай бұрын

@@vithor9915 yes the oem reinforcement has the outer bend just like the strut tower itself. Garagistic is flat but is a thicker metal overal”.

@vithor9915 10 ай бұрын

@@6ixgarage got it.. Thanks for clarifying.. I might go with the oem one, as I have no plan to use camber plate for now.

@NatyDread29 10 ай бұрын

Dude thank you your video saved me headaches I just did the same thing and got my problem fixed less than 2 minutes ❤❤❤

@lard1892 10 ай бұрын

Not always the answer...

@6ixgarage 10 ай бұрын

…

@joesbarners 10 ай бұрын

Every once in a while the gas pedal cuts off at 10 liters even though I have it on the floor. Could this adaptation fix that? Thanks:)

@6ixgarage 10 ай бұрын

Doesn’t hurt to try this adaptation reset, hopefully it works