Major low hp car lol 😂

@Mikenikes129 someone hit it with the door or basket when I was parked in a Walmart I didn't notice till I opened the door and the inside got crunched in by me opening the door pretty quick 🙃

@AllTheBoost other channel is for everything else, not messing with cars

@@Nilesp81 fuck yea

@AndrewsPuello save for rods and pistons hesdgasket head studs acl bearing kit , cause your gonna wanna turn up the boost ain't no problem with forged reliability, collect some spare block ,and transmissions cause that's next weak link

@chaytonw1457 for sure the heater hose that come off the firewall , and the chassis harness that runs along the back side, you can un clip from the middle and zip tie it more down for clearance I would use metal zipties for it and alot of heat tape and wrap so it doesn't get burned same for heater hose , for the driver side I will umbolt the fuse box and try and move it out the way as far away so you have room for intercooler piping and trubo

@ thanks!

I'm late but there essentially the same

Easter eggs lmao

Yea it works though plenty of air moving around the engine bay iat we're normal not hot at all

If you have the money get a custom kit made

@ssjwlliam4752 yes and no , depends on previous owner maintenance really, some people run 300-500 hp on stock transmission, others like me keep shredding stock gear synchros around 330hp , if your doing roll racing it will be easier then consistent line launches that puts more stress on parts

I recommend doing lots of research and getting help from a trusted mechanic. Don't want to spend money on the wrong things first

@OfficialNSjib add me on discord 2point4turbo

No cause the pistons in the stock a4 accord will hit the valves on a a2 head , so you gotta replace the pistons, I figured if ima already gonna swap to a2 pistons might aswell just build the bottom end at that point, so it's not just a viable option for minimum gains when turboed ,it's alot boosted gonna make good power just the power band would be better but na , stock a4 motor or boost will take 500hp with a good proper tune , honestly a great turbo manifold does wonder so your not forcing more boost to compensate the lack of decent flow

@@2point4turbo oh okay, I honestly had no clue the a2 head would make piston on valve contact, nobody talks about that in the vids I’ve seen of putting the a2 heads on the a4 bottom end

@Ljdawson19 they probably edited key info out or lucky and got away with a very thick headgasket but that's sketchy to even try and do, I don't want to gatekeep info or hide failed results

@@2point4turbo I appreciate it brotha, do u have a instagram or TikTok to follow?

@@GarageGoons69 tiktok and instagram both 2pont4tubo my personal ig is chris26156

I have the stock maf rewired to a Gm style speed density , I would highly suggest taking it to a proper tuner till you have a better understanding at what your editing with cause you run the risk of melting a piston or leaning it out and both are no bueno

@2point4turbo yeah I know lol. Not sure about the gm speed density you speak of

@@josephbenson3757 my tuner set it up and wired it for me i would have money up for it befor bugging people about it cause time is money i personally dont like to waste peoples time esp with out money in had , first step get the car to a tuner and see what they say first ask them all the questions you might have so have your notes ready

@aaronjellison1 that's a tuff one to find for ,your best bet is joining 7thgen accord Facebook groups and ask if someone is selling a custom fabricated v6 turbo kit since I don't think they even make them off the shelf as apposed to kseries cars,

@@aaronjellison1 it you got the dough , get with a reputable fabricator to make you one

I was thinking I was going to have to makeshift one. Just figuring how I’m gonna do might be a pain, I’m kinda new so if I was to make one I would have to have the exhaust meet with the turbo? Then exit to the exhaust?

Thanks, I appreciate it, this build is one of my passions.

@@Cardude369 I'm just a normal guy with a currently complicated life , with a busy job , I appreciate it, I want to put out good quality videos for you guys

@@2point4turbo I know how it goes bro if I could I’d donate and if I ever do get rich I will!! Good luck 👍

Yes its a honda k24a4

It's still seems crazy to me that me posting keeps people from all over the world 🌎 watching, and lately I've been having alot of personal issues going on with family members, and yes most definitely health is priority, mentally and physically, at the end of the day I'm just a normal person. but with some video/editing skills i learned through highschool , I don't ever want to feel pressured to upload or post , I rather have good quality content that I throughly enjoy making and uploading, not everything i do has to public, I don't make money from KZbin (yet) so I still work a normal job to pay my bills and eventually I'll get around to splurge extra funds on my hobby that all my viewers enjoy ,and I do want my accord to come back stronger and better then before but it is alot money to do so ,so it's been on the back burner 😅 so thank you for sticking around and being a subscriber it does mean alot ❤

@@2point4turbo yeah thats great, i can relate, i want to post on 7th gen mods not talked about

Yes definitely getting the dry eyes , I work in a warehouse and it's mad stuffy so that doesn't help I keep em as moist as I can

its a headache but well worth it i reccomend a backup car as the daily

super late to respond but ktuner has no boost controller support so just off the spring

I have no idea I have just what ever the stock ex came with no body attachments or anything I haven't even looked at any since I got the car

@@TOBI_3Z you dynod it?

You probably have the v6 model

@anoncanon1100 for being a economy car I think that's pretty respectful

@@markreyes5728 message me on Instagram , chirs26156 I haven't on here much

They sell a 50 bt add on chip you can buy here www.hamotorsports.com/products/bluetooth-add-on-module-for-ktuner-rev1-boards

@@2point4turbo thank u bro I appreciate it bro I have the same 7th gen accord bro k24a2 swapped

@@DylanGonzalez-yu7wo he'll yea man that's dope, my car is down front wire that burned some electrical chassis wire, also I sold my turbo kit so I need another lol , sidewinder this time let's more space in the engine bay firewall

www.hamotorsports.com/products/bluetooth-add-on-module-for-ktuner-rev1-boards

tbh my dream is leave Brazil and go to weed legalized country, with nice cheap cars

Damn sorry to hear that man! I currently am stopped mid tracks in my build due to the turbo manifold being to close to my firewall and it melted some chassis harness wires! So yea new plan is to get a new sidewinder turbo manifold and turbo and re run better and safer im set back about 3k usd to finish my car ! Or another 2k for total of 5k for a new turbo manifold / turbo / 1200cc injectors / boomslang ecu dual harness adapter harness and a haltech stand alone elite 2500 ecu , ime saving cause I don't got money like that but I want it done for sure

They want 20k US dollars for a 2005 accord in Brazil?

So I haven't did that yet the car wouldn't recognizing my aem wideband at all I'm thinking it's due to the car running oem off 2 02 sensors I need to put a 2nd o2 bung and see if that works I have it disabled in my ktuner so it should only ready primary o2

Lmk what you find I’m in the same boat

Um extremely sorry I haven't replied, the cars engine bay caught fire and I have just felt like absolutely shit with my mother passing I haven't done anything to fix it ,I'll try and get a video update on it

I highly recommend a sidewinder my obx top mount for a k20 rsx was to close to my firewall and melted some wires

My engine bay caught fire from my motor leaking on passenger side axel and it flung it on my engine harness touched my engine harness on my turbo 3inch down pipe and caught fire so I highly recommend a turbo blanket/ heat wrap on the downpipe, and fixed oil leaks I hade bot but no wrap on the downpipe

I can try

So so sorry I'm so late but yes it will but the downpipe might to close to the firewall I had to beat my fire wall in with a hammer to make it fit

Honestly I don't make alot of hp for it to affect it at all, so not a real issue yet

I love it too. Sadly, with the turbo kit, it burned my engine harness on the firewall , so ima replace the harness , I did sell the turbo kit ( just turbo and manifold ) I want a sidewinder so it helps with clearance , also this my og main channel so yea lol 😅

100% very valid I could definitely shave a few Oz off 😂😂 , this comment made me Chuckle

It is a factory agp6 5speed manual transmission , it is currently broken and parts are limited so it will be getting a fresh rebuild in the future

My guess from it maxed with stock injectors I would assume it's around like no higher then 265hp with 100% duty for the the 310cc injectos I have on

I definitely believe it did aswell

take it to a dedicated tuning shop familiar with ktuner end user tuning software

@@2point4turbo worth it to get my own laptop and plug?

@dancearoundtheworld5360 I would recommend taking it to get tuned professionally unless you got money to burn on a new motor incase you blow it

@@2point4turbo good point

It was actually set for 7,200 car was losing power before even got it lmao so didn't even tap it lol 😅

2.4l auto's from forum post i saw with mild upgrades like bigger and better cooling with 15k milage atf changes. its lucky to even keep that tranny cool with heavy usage on a barebones motor no tuning. Manual are the saving grace for your wallet long term. im still learning about this platform, i dont know exactly whats all available in terms of auto trans internals for the platform, (note still a honda newbie)

Just seeing this now, process is exact same

I would recommend getting a auto trans rebuilt with new stock internals and a new trq converter, it should withstand 350hp boosted a good turbo manifold will help with the trq not killing the trans quickly it is doable

appreciate the response <3 @@2point4turbo

@ElogantFitness yea man no problem 😎

Check out my build video if you haven't already it has everything there

@@2point4turbo thank you 🙏🏽