Пікірлер
@R6_Cobra 2 күн бұрын
are you able to attach the anti fog unit on the back of this version of the boonie?
@familyburner9999 6 күн бұрын
what suppresor is that?
@Fn_Infinity 6 күн бұрын
Does the emp1 fit into that gun
@vlz_krypton 7 күн бұрын
This one should also fit on the Mtw Forged right? Because I bought a cheap Aeg grip in the same style and it didn't fit.
@FalcoINC 7 күн бұрын
Aww mate I watched the whole thing waiting on the sounds comparison! Wonder if this clipped at all?
@casualplayer8176 8 күн бұрын
Thanks for this exactly what I need for my article 2
@RichardEnglander 9 күн бұрын
8:07 dude, get an earpiece and a throat mike. You will get shot one day because of that radio noise.
@Miguelon88888 12 күн бұрын
Just purchased this grip to try to fit it on an advance frame. Thanks for the review.
@botondbalazs4893 13 күн бұрын
Could i get please tge files for the grip?
@datsoon9236 23 күн бұрын
How much do all of these run in total?
@AC2rn 25 күн бұрын
Where did you get the skin for the srs?
@Rocketgoose01 29 күн бұрын
Btw I Am jealous I can’t afford airsoft guns and that’s my dream one hopefully I’ll get it one day
@ZinoAmare Ай бұрын
this was probably the easiest someone saw it replace, my hammer does not always cock back normally, sometimes it does a half cock >.< I had this problem from day 1 I bought it, I bought an masterpiece sear spring once it's here I will replace it ^^
@Slappyclip Ай бұрын
Can you get the links to these?
@Livevvire9 Ай бұрын
nice video. Whats the ruber antena you are using ? I'm trying to get to aisoft and now into these radios.
@alexphillips6269 Ай бұрын
What tracer unit is this bud?
@marcoviebrock1550 Ай бұрын
is there a similar pin for an AR10 / SR25 / .308 receiver? My stock pin is 5,86mm diameter measured at the point without the cutout and 41,77mm long. Is there such a part for realsteel guns?
@marcoviebrock1550 Ай бұрын
nice vid, can you tell me the diameter and the length of this pin? I am not sure, if it fits on my .308 replica
@raimondsindo1428 Ай бұрын
I will also have to think about upgrading the stock and pistol grip for my Billet 14". From my experience, I can recommend oiling the fire selector pin and shifter rail (Abbey LT2 lube or similar) as I can see that the shift is not very smooth. Also, the spring length can be slightly shorten by 2mm and it will be super smooth. Enjoy! 😉
@Wh05LEE Ай бұрын
Love the video ill be starting up soon
@liquid5684 Ай бұрын
do you recomend the HI-CAPA over the AAP-01? I wanna get one but idk which one
@AngryBullAirsoft Ай бұрын
Yeah - AAP is a cheap entry point but there's a lot can go wrong and you can rarely only mod 1 part of the firring system, capa's are a lot more forgiving and easier to work on in my experience.
@liquid5684 2 ай бұрын
would this make tracer bbs glow? I wanted to get a tracer for a capa but its excpenceive to also get a threaded barrel that's why I wanted to ask.
@AngryBullAirsoft Ай бұрын
It wouldn't no - however one of these is the same price as a 5KU outer barrel so you could go down that route?
@oracle_2010 2 ай бұрын
In my opinion, these are the optimal setup: - guarder nozzle - TM rocket valve - AIP valve blocker
@AngryBullAirsoft Ай бұрын
Thank you <3
@Oodyos7thMafiosy 2 ай бұрын
Hi can anyone share his wisdom with me? I got a Problem. Im using thisRegulator for several years and always put it on 90 psi, but at the end of the day marker indicates 130/140 psi !!! i didnt touched it midcame and i am concerned about the other players saefty. What could cause this problem? Help.
@AngryBullAirsoft 2 ай бұрын
Exactly the problem I had with this regulator. The internal mini white o ring will be damaged or in dire need of a lube and clean. Once done it'll be fine again.
@Oodyos7thMafiosy 2 ай бұрын
@@AngryBullAirsoft thx M8 for the Tipp !!!
@bustomi3643 2 ай бұрын
Do you have comparison sound with the stock head piston?
@AngryBullAirsoft 2 ай бұрын
I'm afraid not. I've never really ran it stock. First mod was the SBA airbrake head and then it's rolled on to mousefart version 1.2, 1.3 and now 1.4
@bustomi3643 2 ай бұрын
@@AngryBullAirsoft mines got advance silverback head piston, is it worth it to upgrade to faceless 1.4
@8-bitbattleboi75 2 ай бұрын
extremely helpful video!, also one question i have a very tiny gap in between the adapter and the mag, like its not fully flush against the adapter but there is no signs of leaking do you think i should keep trying to make it flush or leave it as it is because i dont think it can go any further and i think if i keep trying i might break it
@AngryBullAirsoft 2 ай бұрын
You will almost always get the tiniest of gaps due to allowance for tolerances. It will be fine as the seal is done on the oring above. My older gen2 was visible but newer gen3 isn't as bad.
@georgiandreev5821 2 ай бұрын
Isnt 80 psi too low for a hi-capa? How much joules do you get and with what BBs?
@AngryBullAirsoft 2 ай бұрын
It's on the lower side but I use tight bore barrels and nozzles with very good seal. I play exclusively indoors so 1J is perfect for what I do.
@georgiandreev5821 2 ай бұрын
@@AngryBullAirsoft got it, boss! Thank you for the info!
@andycharles6419 3 ай бұрын
Needed this video as my HPA kit just turned up so thanks :)
@AngryBullAirsoft 2 ай бұрын
Glad I could help!
@aaronelliott1450 3 ай бұрын
Does this line work with the mtw ?
@AngryBullAirsoft 3 ай бұрын
Certainly does!
@matttheroux4769 3 ай бұрын
Just found your channel i subscribed and i have the same gun. Good day from Merica 😂
@AngryBullAirsoft 3 ай бұрын
Thank you and Good day to you too 🙏
@ItzEvolvee 3 ай бұрын
Hi, what sight is it you are using in this video?
@AngryBullAirsoft 3 ай бұрын
Hi, It's the Feyachi RDS 25 www.amazon.co.uk/gp/product/B08NWZ4MPD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
@TorksTube 3 ай бұрын
sooo, what was the problem? if that didnt resolve the problem? :(
@AngryBullAirsoft 3 ай бұрын
It was the tiny o-ring. I got a replacement from Redline and it's been golden ever since!
@TorksTube 3 ай бұрын
@@AngryBullAirsoft good! thanks for the response
@raydencorvino1311 3 ай бұрын
I’ve seen some run a tube into the slot for the bbs that was connected to a hi cap mag at the other end. And he just had to wind the mag and it would feed all the way up the tube
@Food.Vladimir 3 ай бұрын
Hi, can we get update about 5KU BBU is it good after 1 year of playing?
@AngryBullAirsoft 3 ай бұрын
This has moved on to a new owner now. I bought an Article1 and it is the perfect spare for when the capa goes down and won’t affect my pistol muscle memory. Sorry
@FSUAGAMINGAIRSOFT 4 ай бұрын
I just got a bomeyard one and was able to fix it with a spare G18 upper. I have a tournament on Saturday and I needed a side arm. I have a HPA mag for it but do I need to upgrade the nozzle return spring for better feeding? As well ive seen on Reddit that the Hammers do break. I am also a tech but specialize in anything AEG, not so much GBBs Thanks in advance!
@AngryBullAirsoft 3 ай бұрын
Sorry this is a late reply. Nozzle spring defo upgrade if using stock BBU. Hammers will break - less than an hour to replace.
@FSUAGAMINGAIRSOFT 3 ай бұрын
@@AngryBullAirsoft You were right! Changed the nozzle return spring and the Hammer assembly ( hammer,valve knicker, auto sear) with CowCow and runs my HPA tapp like a dream
@Mark_B544 4 ай бұрын
Deadly silent? Let’s hear it
@AngryBullAirsoft 3 ай бұрын
Sadly not in my hands any more. It was quiet - but not MTW quiet.
@szelwicki 4 ай бұрын
Does this fit smoothly back in TM housing or you would need for example the Guarder light wieght one?
@AngryBullAirsoft 3 ай бұрын
Will fit happily in TM housing.
@bobsburgers2071 4 ай бұрын
Recoil ? Its air soft it has no recoil
@jbg2408 3 ай бұрын
gbb guns have recoil
@AngryBullAirsoft 3 ай бұрын
Not RS recoil but for an airsoft pistol it had plenty.
@bobsburgers2071 3 ай бұрын
@@AngryBullAirsoft lol
@jamesplayz450 4 ай бұрын
900g on my hi capa
@HellfireBLR 4 ай бұрын
This recoil spring is not stock, it's a 200% one of the same kit you got nozzle spring from. Stock springs are coated black.
@AngryBullAirsoft 3 ай бұрын
Good spot! Thank you
@JamesG19771 4 ай бұрын
what happened with the video series for this?
@AngryBullAirsoft 3 ай бұрын
It got handed back to it's owner. I had loads on so didn't record it fast enough. I will try and get the second edition model back for testing.
@BeeboyorBeeman 4 ай бұрын
currently hpa tapping a ct25
@siobhonc 5 ай бұрын
Hello from Hong Kong
@AngryBullAirsoft 3 ай бұрын
Hello!
@RageIdk 5 ай бұрын
Hey man great video wondering if you could help, my HPA line is stuck inside my reg and I'm not sure how to remove it. I tried to pull on it lightly but it just seems to be super stuck it normally fly's off but not anymore
@The_future1991 5 ай бұрын
how to get the Valve rock solid on the magazin, my modification like in your video always get loose after some shooting, the little oring moves back and the sealing is gone.
@AngryBullAirsoft 3 ай бұрын
A couple of wraps of PTFE should hold it tighter.
@indonesianairsoft4429 5 ай бұрын
Can you tell me the use of yelow metal on the regulator’s left side
@AngryBullAirsoft 5 ай бұрын
Just a blank as far as I'm aware.
@joelg6525 5 ай бұрын
it's a relief valve in case you overpressurize the regulator so you don't damage components or the regulator itself
@joelg6525 5 ай бұрын
I chose this regulator for that reason over others since I'm not constantly monitoring the pressure when playing on the field
@dakotataylor4849 5 ай бұрын
Please do not call air soft rifles assault rifles. What is an assault weapon? I can assault you with a potato does them mean there are assault potato’s? Great video otherwise tho good stuff. Keep it up. -Love a Texan who wants to keep his guns rights
@AngryBullAirsoft 5 ай бұрын
Excuses my COD lingo lol
@pacopakito4576 2 ай бұрын
nah people now a days call whatever they want on things and .... persons.
@ditwashet 5 ай бұрын
Thanks for explaining. Soon getting my first HPA replica (ASG Scorpion) and had a few questions: Does the tool to change the psi come with the regulator? Also, I only have the chance to fill and test on the fields so what psi would probably be 1.2j? Thanks :)
@AngryBullAirsoft 5 ай бұрын
If you buy it new - Yes. Balystik regulators need a specific tool, others like Redline, Polarstar or Wolverine tend to use a hex key (allen key).
@LukeS166 6 ай бұрын
What slide is this?
@AngryBullAirsoft 6 ай бұрын
Costa VIP
@indonesianairsoft4429 6 ай бұрын
Please make video when you put it on tm hicaa 🙏🙏
@AngryBullAirsoft 6 ай бұрын
It's coming soon!
@indonesianairsoft4429 5 ай бұрын
@@AngryBullAirsoft ill wait 😁😁