HPA RC hobby

Пікірлер

@ValFolarin Ай бұрын

It is good that you tapped which motor you were replacing otherwise I would have gotten confused 😁

@coreyfuchs730 Ай бұрын

You could of just repinned the plug to match the other one . Instead of cutting the wires😂

@vansesweng6591 Ай бұрын

Kalo ganti shock metal harus tambah shock tower ga om

@hparchobby Ай бұрын

@@vansesweng6591 harus diksih om

@mozlo7225 3 ай бұрын

Works fine with the stock esc?

@hparchobby Ай бұрын

It can't be maximized because if it gets hot the motor will stop

@JoseGarcia-yk3dl 3 ай бұрын

Is it worth changing the engine having a 180? Thank you!

@knotgiven2u84 4 ай бұрын

Fortunate side note... The new austar ax 8560 Will accept the aftermarket metal shocks for the WPL c24.. I did however trade springs with the factory shocks. More lift, but still soft. Recommend both vehicles !! The austar ax8560 is awsome rite out of the box. Just pop out the foam tire incerts. Still like my c24-1 with 2 speed gearbox ! My 2 goto crawlers. Can't go wrong with either one !!

@knotgiven2u84 4 ай бұрын

Have to admit it looks sharp.. but at the same time, after seeing this, decided not to upgrade to metal. 2 speed gearbox.. and shock upgrade really helped mine. Swapped out to Dumbo RC controller and receiver. New 40 amp ESC. 370 motor. Metal drive shafts. 21 g steering servo. Don't think I will do anything further? Maybe tires? Quite happy with what I have now. I can see a headache of maintenance keeping all of those things tight.

@_kjiaccuk_2138 4 ай бұрын

Тяги регулируемые?

@cyreljohncoronel9850 4 ай бұрын

Why is stock motor faster than that?

@_yucko 4 ай бұрын

it is higher power but lower gear ratio. it converts the power into more torque instead of more speed

@doctorhelicopter 5 ай бұрын

Havnt received my WPL yet. Any idea why it has 3 output shafts?

@rizal.vian31 5 ай бұрын

pake mur ukr brp om?

@hparchobby 5 ай бұрын

Mur ukuran 10 om

@aryan42162 5 ай бұрын

I used lead cause it's heavier.

@luisvalmacaranas23 5 ай бұрын

Joseph Noel Macaranas

@stephanbol3151 6 ай бұрын

I’ve got the same motor in all 4 of my vehicles c24 c24-1 c14 & c34 but i changed the electrics and use a 30 amp esc

@hparchobby 6 ай бұрын

I also want to change the esc

@2JZE3 Ай бұрын

is it hard to change the ESC?

@jaylvsjesus 7 ай бұрын

did you have to cut a hole in the bed to fit it?

@hparchobby 6 ай бұрын

Yes, I put a hole in the body because it doesn't fit the dynamo

@mami_rc.cc. 7 ай бұрын

Is there a problem with a genuine ESC? I often see that it sometimes stops working in Japan, but I'm worried about purchasing it. I would appreciate it if you could tell me if there is any problem after that☺️ 純正のESCでも問題ありませんでしょうか？時々不具合あるなどと見かけるのですが、心配で購入出来ていません…これに新たに受信機とプロポまで買うつもりないのでその後問題ないか教えて頂けると助かります。

@hparchobby 6 ай бұрын

Yes, sometimes the machine stops. Looks like the ESC needs to be replaced

@Leo_Cr 7 ай бұрын

Does that engine work with the stock receiver/controller?

@hparchobby 6 ай бұрын

yes it works but can't play for a long time because the machine suddenly stops

@Zahar_Borzov 8 ай бұрын

Акумулятор сток? Тянет нормально?

@PrenatalApocalypseNow 8 ай бұрын

Hey, at 2:30 did i just see you twisty the red wire and black wire together...listen my Brother, even rebellion has its limits! ;)

@hparchobby 6 ай бұрын

Thank you for the advice. because I'm still a beginner

@TW39 8 ай бұрын

Hi Can I use the 370 motor on a 110scale rc crawler chassis I want to build a lowrider not made for speed wanted to use a smaller motor 370 with gearbox on my build

@hparchobby 6 ай бұрын

I think it could be with the type intended for that unit

@TheBakedClam 10 ай бұрын

Upgraded or stock what do you like more

@henrymca 10 ай бұрын

It's a nice looking upgrade but personally I think the stock plastic parts make the truck drive more realistically

@HDGnvrsleep 11 ай бұрын

What motor you running?

@rcjm69480 Жыл бұрын

Est ce que la peinture a tenu à l'extérieur ?

@yanuarni9870 Жыл бұрын

di lem ya mas

@hparchobby Жыл бұрын

Iya brow

@AlvinRayzadanaufal-xf8ne Жыл бұрын

cheers bang

@dianmsyah9995 Жыл бұрын

Om itu escnnya ganti atau pake bawaan ya om ? Punya saya udh ganti gearbox dan dinamo cuma jalannya jadi mandek2 om mohon solusinya om heheh

@hparchobby Жыл бұрын

Ini msh pakai esc bawaan kog. Mgkn itu escnya emang gk suport . Pnya saya kebetulan masih aman saja setelah ganti dinamo sm gearbox

@edwinnegron7758 Жыл бұрын

do you have the part number for the replacement drive shafts? TIA. want to get the right one with the spindle on that motor

@hparchobby Жыл бұрын

sorry I didn't use that number. just buy on amazon

@jorgewellmann7717 Жыл бұрын

How feels the engine upgrade?

@hparchobby Жыл бұрын

I don't think I'm satisfied, because only the torque increases but the speed is slow, it's better to replace the two-speed one

@brappineau4161 Жыл бұрын

How do you keep these things tight

@hparchobby Жыл бұрын

I'm a little dissatisfied with this upgrade

@user-by5hw1to9d Жыл бұрын

i have 2x sets im struggling to fit it all and get lenghs right

@hparchobby Жыл бұрын

me too even more. quite difficult to customize it

@brianmeow Жыл бұрын

What is the clear paste?

@hparchobby Жыл бұрын

resin

@DestaMb00 Жыл бұрын

itu yang pemberat bentuk kotak di body apa namanya,Om

@hparchobby Жыл бұрын

Gak tau namanya om. Asal cari di toko bangunan . Kalo gak pakai ring baut ja yg berat om

@DestaMb00 Жыл бұрын

Ok,om

@user-ym1vo6mg9c Жыл бұрын

ผมชอบดูครับ ติดตามครับ

@hparchobby Жыл бұрын

Thank you

@or4ngbiasa712 Жыл бұрын

Ijin tanya om basis c24 dan c 34 sama yah?

@hparchobby Жыл бұрын

C24-1 bro

@thegclass4861 Жыл бұрын

Very cool my friend😁🤝🤙

@hparchobby Жыл бұрын

Thank you

@thegclass4861 Жыл бұрын

@@hparchobby you are welcome🤝🤙😊

@rccartv898 Жыл бұрын

nice👍🏽

@hparchobby Жыл бұрын

Thank you

@redneck.rc1986 Жыл бұрын

Nice rig I like that look

@hparchobby Жыл бұрын

thank you

@ryieladventures Жыл бұрын

Why did you connect the stock wire and the wire that comes with the motor? What i did was to take out the stock wire from the stock motor and installed it directly to the new 370 motor. However, im getting problems on its power now. The experts says i need to replace txrx and esc to atleast 30amps.

@hparchobby Жыл бұрын

because it doesn't fit

@nemag1 Жыл бұрын

It seems to me that you installed the steering rod incorrectly

@hparchobby Жыл бұрын

because I'm still a beginner 😁 thank you for the advice

@nemag1 Жыл бұрын

@@hparchobby I am also new to this hobby😄

@redneck.rc1986 Жыл бұрын

Nice work

@redneck.rc1986 Жыл бұрын

Nice work

@hparchobby Жыл бұрын

Thank you

@redneck.rc1986 Жыл бұрын

Nice

@hparchobby Жыл бұрын

Thank you

@1nsanewayn3 Жыл бұрын

you're just wasting money.. you should upgrade with dual speed gearbox to get speed and torque.

@hparchobby Жыл бұрын

Thanks for the comments. because I'm still a beginner

@MrChapis1121 6 ай бұрын

You can also replace the pinion gear inside the tranni to 8t 5mm yo gain speed, although you sacrifice a little torque

@doctorhelicopter 5 ай бұрын

I never use high gear on my 2 speed crawlers

@smelker 27 күн бұрын

@@MrChapis1121how do you do that?

@LuckyStablesYT Жыл бұрын

Plastic drive shaft still tho!?

@Mmonsart747 Жыл бұрын

Cool truck, nice paint!

@hparchobby Жыл бұрын

Thank you

@TapakBand Жыл бұрын

Nice bro auto sub

@hparchobby Жыл бұрын

thank you bro

@hparchobby Жыл бұрын

thank you bro

@user-ik2uq3mz2c Жыл бұрын

かなはわな

@hparchobby Жыл бұрын

そうですね、、コメントありがとう

@ERRORCODE2121 Жыл бұрын

My motor is about cooked I should do this

@user-hw9vq6be4i Жыл бұрын

370馬達用原廠電路板不會燒掉？

@hparchobby Жыл бұрын

No problem

Ең жақсы KZbin

Пікірлер