Ely Miranda

Пікірлер

@user-cb9pd5sl9e 7 ай бұрын

5 years late on this and IKEA increased these cabinets a lot in price. However this is handsdown the most genius hack for a shell! What were the finishing touches around the camera hole? It looks like a piece of plastic that covers up the exposed cut wood.

@elymiranda6944 7 ай бұрын

It's a plastic grommet used on desks for the passthrough hole for cables.

@PriyankoMahanta Жыл бұрын

Wow

@MummyandHarry Жыл бұрын

Google Nest

@richf5165 Жыл бұрын

These Units are now back in IKEA as of now. Just ordered mine. Thanks for this video.

@karolinag5887 Жыл бұрын

How you connect your tablet/ipad to your camera?

@MynameisEpinephrine Жыл бұрын

Just wondering how long or how much do you pull from a shot?

@elymiranda6944 Жыл бұрын

Usually I do 17in/34out in around 30 seconds.

@hardik__baria 2 жыл бұрын

how to connect camera to pc ??

@DJVINNIE 2 жыл бұрын

Absolutely beautiful, great idea great job

@michellealejandre9468 2 жыл бұрын

This is awesome 👏 What software and printer was used for this? Thank you

@PurpleGraves 2 жыл бұрын

looks heavy

@elymiranda6944 2 жыл бұрын

Not at all. The two halves are transported separately and they are just shells. My 21 y/o daughter is able to move them around easily.

@jacobdejesus4690 2 жыл бұрын

looking for the cabinnet but no result

@elymiranda6944 2 жыл бұрын

I don't think IKEA carries it anymore (at least not in the USA). Sorry.

@Keisha956 3 жыл бұрын

is the screen an iPad?

@elymiranda6944 3 жыл бұрын

No. It's an early generation Microsoft Surface.

@EatTravelHappy 3 жыл бұрын

Very good! I've been trying to figure this out for a year. The secret is the twist tie. Awesome it just worked for mine. 💥👍🏻👌🏻

@candacealsenay6224 4 жыл бұрын

How did you fix the camera mount to the shelf?

@candacealsenay6224 4 жыл бұрын

How did you mount your camera mount? I see the camera is on a stand, but how did you fix that to the shelf below?

@elymiranda6944 4 жыл бұрын

Drilled a hole through the shelf and used a bolt that fit the threaded hole of the mount. The mount fits a standard tripod. So it has a standard tripod mount threaded hole.

@MrTipsoTV 4 жыл бұрын

Thank you for this video, I've made mine www.pixelsbooth.my

@mathewsmail13 4 жыл бұрын

Shame on you GoPro

@nk0126 4 жыл бұрын

❤❤😘

@ScarlettKitsune 4 жыл бұрын

What did you use to construct your booth? PVC pipe?

@elymiranda6944 4 жыл бұрын

Kitsuné Shadow - it was purchased. It’s a 5x5 pop-up tent.

@nestorfraga681 4 жыл бұрын

Hola , tengo una impresora Hiti 525 pero no se como configurarla para que corte tiras de 2x6

@miguelvidargas986 Жыл бұрын

tengo el mismo problema

@anastasiamoser2826 4 жыл бұрын

Great Idee how did you fix the screen?

@benjcap 4 жыл бұрын

whats the measurements of the cabinets? they dont sell this at ikea anymore

@robertravenelle6381 4 жыл бұрын

what are you using for flash ?

@elymiranda6944 4 жыл бұрын

www.paulcbuff.com/Flash-Units/alienbees-tm-flash-unit.html

@guiguigodro 4 жыл бұрын

The finishing touches around the holes are astounding! I am very impressed with this! Good job!

@tradertriggs8148 4 жыл бұрын

NICE!!!!

@MrTipsoTV 5 жыл бұрын

Thanks man..I've made one. instagram.com/pixelsbooth/

@lifelist1m370 5 жыл бұрын

Can i do it on my go pro 4 ?

@91PBKID 5 жыл бұрын

Can you please email me I'm very interested in working with you and paying your for your services [email protected]

@jakebcampbell 5 жыл бұрын

What did you use for the software?

@elymiranda6944 5 жыл бұрын

This video explains it all. kzbin.info/www/bejne/ZnXLnpmfpa9ob5I Software is DSLRbooth

@mrojc1024 5 жыл бұрын

Do you make n sell ? Just shell

@elymiranda6944 5 жыл бұрын

No sir.

@gforcex64 5 жыл бұрын

Great idea! I’m going to make with the 2 cabinets and use an iPad Pro and mount a metal security iPad holder, mount a light to it, and use that! Thank you for making this video!

@AndreTKemp 4 жыл бұрын

Thats a good idea. I was going to do that with mine as it makes it really portable ad lightweight. I didnt like how small the ipad was though so wound up using a 22" touch screen.

@DraXgonProductions 5 жыл бұрын

Is that a third party shock mount?

@elymiranda6944 5 жыл бұрын

DraXgonProductions if you mean the mic, no it came with that. But if you’re referring to the black mount that couples the mic mount to the gimbel, I made it and explain how in the video.

@DraXgonProductions 5 жыл бұрын

Ely Miranda thanks for the reply. I’m referring to the mic. I looked up the same mic but the shock mount that I’m seeing that comes with the kit is a more traditional shock mount. The one in this video is something I’ve never seen before.

@djjiik7922 5 жыл бұрын

How did you mount the surface pro? I am curious to know since I am actually working with an 11" I Pad Pro.

@elymiranda6944 5 жыл бұрын

Search for aluminum C-channel at your big box home store of choice ( www.homedepot.com/s/aluminum%2520c-channel?NCNI-5 ) . I think I used 1/2". I just cut it to the width of the tablet and epoxied it to the inside of the cabinet. The tablet sits in this channel. Then on the shelf behind it, I drilled a hole and inserted a set screw. This screw is tightened until it touches the back of the tablet with enough pressure to keep it in place.

@djjiik7922 5 жыл бұрын

Do you have any recommendations for any substitutions for the cabinets you purchased? I've been trying to locate for 2 hours now and can't seem to locate... Do you also have the information about the cabinets you purchased such as model # etc?

@elymiranda6944 5 жыл бұрын

Sorry. I have no other info. I think Ikea may have discontinued the JOSEF.

@djjiik7922 5 жыл бұрын

Do you have the final demensions like height, width, depth? @@elymiranda6944

@elymiranda6944 5 жыл бұрын

@@djjiik7922 Looks like it's still available in the UK... dimensions are in this listing... www.ikea.com/gb/en/products/storage-furniture/outdoor-organising/josef-cabinet-in-outdoor-white-art-50213141/

@washingtonreign 5 жыл бұрын

I found these IKEA Hallan cabinets which are comparable, and I'm planning to do my own version of this DIY using these ones. www.ikea.com/us/en/catalog/products/S89249403/ There are a few different sizes and configurations available for the Hallan cabinets so you can check out those different sizes and see what works best for you. I opted for the two longer ones that will be stacked like shown in the link.

@kennerg.5998 4 жыл бұрын

@@washingtonreign Thank you!

@danielLACEUP 5 жыл бұрын

Super nice!

@asimations 5 жыл бұрын

Google want s to control each and every thing one can think off and we are happy to surrender.

@valeriealexis3023 5 жыл бұрын

Can you use any camera ?

@elymiranda6944 5 жыл бұрын

This is totally custom, so you're free to use whatever you like. However, you'll need to make sure the camera is supported by whatever photobooth software you choose.

@graffix21 5 жыл бұрын

How did you mount the screen?

@graffix21 5 жыл бұрын

This is the best DIY photo booth on KZbin. Great job dude!

@tylerwhitehead944 5 жыл бұрын

This is the sleekest solution I've seen so far to having the mic + gimbal rig. Good job sir!

@scover816 5 жыл бұрын

nice set up what cabinet is that from Ikea

@elymiranda6944 5 жыл бұрын

Here's all the info on the build: kzbin.info/www/bejne/ZnXLnpmfpa9ob5I

@flipnamedrj 5 жыл бұрын

Great Set up! i was wondering if you could show more of how you mounted the monitor to the cabinet. I am just trying to visualized what you put in the description about the c-angle and set screw through the shelf behind it that keeps the monitor in place. Thanks! Good work :)

@elymiranda6944 5 жыл бұрын

I'm not able to show anything further any time soon. The aluminum c-angle is like in the following link. It's cut to the width of the tablet and the tablet just sits in the channel. In the video at the 1:04 time marker, you see that the shelf holding the camera sits around the top of the tablet. On the front edge of the shelf I drilled a hole that a screw threads through (in the video the camera mount blocks the view of the screw). That screw is tightened just enough for it to touch the back of the tablet and securely hold the tablet in place. Hope this helps. store.buymetal.com/pub/media/catalog/product/cache/7bc4f2e1f0cd846db60d972d8f301a16/a/l/aluminum-channel_62.jpg

@MrTipsoTV 5 жыл бұрын

hi, what a great diy. i've buy the josef but how you cut out the monitor, lens & strobe. tq

@elymiranda6944 5 жыл бұрын

Thanks. Please check out the answer to the same question in the pinned post above by Sunny636

@RAYT721 5 жыл бұрын

Ely: thanks so much for this presentation! I have Alexa now but she's hard of hearing and displaying signs of narcolepsy and then amnesia when she wakes up.

@smileywarrior1870 5 жыл бұрын

This looks great but I would get rid of the bottom cabinet and get a speaker tri-pod to hold it up. Also put the printer in the same cabinet making it super lightweight and compact. Otherwise this setup isn’t bad at all. It all comes down to personal preference. Good work.

@ChrischoBoardgaming 5 жыл бұрын

People tend to trip over tripod legs, which aren't very stylish, either. You'd have to cover them up with custom-made cloth or something. Then, there is statics to consider -- something heavy up high on something light might lead to people running into the setup and toppling it. With all the expensive tech inside that's probably a scenario we want to avoid. I've seen setups using tripods and I wasn't amazed; very wobbly.

@PrideOfThePacificTX 6 жыл бұрын

Awesome! Thanks mate! Do you know where I can find a cabinet like this? Here in the USA, I don't see this cabinet on the IKEA website. Looking to make one for my wedding next month! Woot woot!

@elymiranda6944 6 жыл бұрын

It looks like they are no longer stocking it. Will have to find another cabinet to modify.

@nelsonmendieta7236 6 жыл бұрын

m.ikea.com/us/en/catalog/products/art/30332116/

@washingtonreign 5 жыл бұрын

Found this one which is similar www.ikea.com/us/en/catalog/products/S89249403/