Jon Mitchell Voices

Пікірлер

@praks99 2 ай бұрын

I have both Izotype RX and Reaper installed. However, when I open Reaper and click on FX, I cannot see the Rx plugins (like you do in your video). Any help would be appreciated.

@minblake2774 2 ай бұрын

Hi, I want to use Reaper to remove the mouse clicking and keyboard typing from my video, but why does my voice also become unclear after applying Reafir (subtract)? Is there any way to solve this? Thank you.

@walcloneguy9346 3 ай бұрын

Does it work the same way on mac?

@flacopico 4 ай бұрын

yes, It was a nightmare! Thanks

@tysingerman 7 ай бұрын

thank you!! now i am going - where is that second video!!

@thevaultrecordingstudio 7 ай бұрын

Thanks- this and LeafC Truncate silence is a profit maker!

@VM-oi3dk 10 ай бұрын

Since you still have to manually split each item, you might as well just paste a selection of room tone in each gap. This will fill exactly the duration of room tone you have chosen to fill in. If the gap is longer than your room tone selection, it will loop it, if it’s shorter, it will trim it. kzbin.info/www/bejne/qZqXoZmbr5Win68si=dvLA3o0RbSswrgzf For me the whole purpose of inserting room tone is to paste over breaths and mouth clicks. I wish there were an auto duck function of some sort to inserted room tone to a whole recording automatically

@FriendlyNeighborhoodNitpicker 11 ай бұрын

I kept expecting him to punch over "where", to turn it to "what", which is the actual line AFAIK. 😆 Good stuff though.

@zeitakulobusta 11 ай бұрын

What is the custom action doing here that you couldn't do before??

@FriendlyNeighborhoodNitpicker 11 ай бұрын

It's doing in one keypress, that which would have previously taken a couple keys and maybe a mouse click between them. * Stop. * Don't save files (assuming you even have that dialog enabled, otherwise I don't think you can do that at all manually). * Record. And it does all three in effectively zero time. If you make a lot of mistakes, performing those actions can get old, fast. Plus, the custom action saves on human error.

@zeitakulobusta 10 ай бұрын

@@FriendlyNeighborhoodNitpicker thanks for the reply. I'm just trying to see all that in action after you create the action though. As far as I can see, all that's happening after you created your punch action was that you set the cursor, then triggered a pre-roll and an auto-punch in at your cursor point....I don't see any stop or deleted bad take. I'm not questioning whether your action works, I just can't see it in action here.

@FriendlyNeighborhoodNitpicker 10 ай бұрын

@@zeitakulobusta you’re right. I know what it’s supposed to do, but it doesn’t actually do it. Whether it’s in take mode or tape mode, the behavior is, to say the least, strange. It seems to either do nothing, or if in take mode, it puts the take after the discarded one, at the beginning of the timeline. Something must’ve changed since this video was made.

@FriendlyNeighborhoodNitpicker 10 ай бұрын

@@zeitakulobusta what I believe it’s supposed to do, is to discard the current take and start recording again. Whether it’s supposed to do that at the point where the original take started, or at the new point in the timeline, I’m not sure I don’t remember from the video and I don’t feel like watching it again right now, but whatever it’s supposed to do, it isn’t doing it. Which is a shame because that was the whole reason I came to this video. But now that I’ve had time to test it, it doesn’t work in Reaper 7.

@cmd_f5 11 ай бұрын

Very good indeed. Can you do a vid on the Reafir convolution EQ function? It doesn't seem to work right, just giving me splattery noise. Nobody has damed to do this, and the REAPER people are oddly silent regarding this in the forums. Thanks!

@Sound-ny4oj 11 ай бұрын

overwrite original file not work

@Rocksite1 Жыл бұрын

Why lanes suck, is simple. Just because it looks cool doesn't mean it's more useful. You can't do as much with a lane. You pointed out you can't name it. You can't edit it the same way, e.g. by doing a crossover with another take, or split and mute a passage in one lane, but not its neighbor. You can't just drag it to another track. It really shouldn't be the default.

@parisambush1122 Жыл бұрын

This, THIS! Before I punched n rolled manually, and my mic would pic up a very obvious keyboard press that I had to edit out every time. Now I don't have to do that anymore and can now work much more efficiently. Thanks so much man!

@SethsVoices Жыл бұрын

YES! This is EXACTLY what I needed. I'd been doing the old-fashioned "press stop, save all, reposition, re-record, etc" with so many bum takes to edit out in post... it was exhausting. Came across this video by pure chance, and it has vastly improved my workflow. You have my words of thanks, Jon.

@GammaAkutabi Жыл бұрын

Ty! Out of curiosity if you notice that mistake late and you continued going, can you still do punch and roll and keep the rest of the recording?

@GammaAkutabi Жыл бұрын

Wonderful! A video from 2 years is helping me now.

@Doctorslosh Жыл бұрын

Thank you, kindly.....

@vivianaarmasvoiceactor Жыл бұрын

Thank you sooooo much! 🙌

@chrisogle001 Жыл бұрын

Thank you for sharing this. Excellent information.

@Cavatica Жыл бұрын

MY HERO

@laurenmckenna2747 2 жыл бұрын

Thank you! So helpful!

@devinhedge 2 жыл бұрын

I had to do this for the first time yesterday. I can’t believe it has been 3 years until I had to use takes and punch-in. Frankly, Reaper’s approach is pretty clunky and doesn’t seem really well thought out.

@MrSasUGames 2 жыл бұрын

Better than reaper reafir?

@MrOscyn 2 жыл бұрын

Nice! Thank you!

@garengibson 2 жыл бұрын

omg thank you so much! (:

@Joethedrummer 2 жыл бұрын

Fantastic video, and the other one. Thank you so much 😁

@7AirCanuck7 2 жыл бұрын

This was a great video that showed EXACTLY what I wanted to learn how to do, including using the 'open a copy...' feature. Thanks! Subscribed.

@thomasturner5090 2 жыл бұрын

THANK YOU FOR THIS

@orelanic4178 2 жыл бұрын

Thank you, the video was very helpful

@ohokiwi493 2 жыл бұрын

wow how refreshing tutorials with no hype you sir are refreshing to find ..loved you punch and roll video easy to follow many go way way to fast . kzbin.info/door/rvVZFA7Ihc_wQzqRszn-nQ this is my channel I have chronic Ruematoit arthritus and this help forget about the pain i sing but most tutorials have I am your boy bla bla :) and tutorial with music back drop why on earth i never understand . because of this keep up your great work you are very much appreciated . keep it simple is the best option for tutorials .. Sure many many agree ..

@monty671 2 жыл бұрын

Thanks for the video. I llok forward to the other videos. Can you also talk about the order of RX tools that you use with Reaper? Thanks.

@asianguy6174 2 жыл бұрын

That noise level is quite prominent still.

@bijukumartalktech7908 2 жыл бұрын

Nice class.

@bijukumartalktech7908 2 жыл бұрын

While taking the tutorial, Please include keybord shortcut also. It will be very usefull to the blind people like me.

@smckix 2 жыл бұрын

Did you have to "save" your work or anything before you jumped back into Reaper, or does it work with Reaper so that you changes are automatically imported into the "second take" lane?

@jonmitchellvoices3154 2 жыл бұрын

The cool thing about Reaper is it will automatically add it to the take. I select "overwrite" in Izotope just in case.

@smckix 2 жыл бұрын

@@jonmitchellvoices3154 Thanks!

@zxkevin57 2 жыл бұрын

Your awesome. Thank you so very much.

@jonmitchellvoices3154 2 жыл бұрын

Glad I could help!

@shanu6478 2 жыл бұрын

Nice intro 🔥🙏

@jonmitchellvoices3154 2 жыл бұрын

Ha ha. Thanks!

@matthewbridges8300 2 жыл бұрын

THANK YOU. This was concise and exactly what I needed to know for narration. Appreciate it.

@jonmitchellvoices3154 2 жыл бұрын

Glad it was helpful!

@saolairde396 2 жыл бұрын

Thanks, and yes a more detailed video would be very helpful 🙏

@jonmitchellvoices3154 2 жыл бұрын

Will do!

@tubeman1983 3 жыл бұрын

A more detailed tutorial on iZotope RX would be great 😃 Cheers 👍

@jonmitchellvoices3154 2 жыл бұрын

I'm working on a series on RX. Should be out soon!

@7AirCanuck7 2 жыл бұрын

@@jonmitchellvoices3154 looking forward to this!

@CM_Civillian 3 жыл бұрын

Great tutorial.

@jonmitchellvoices3154 2 жыл бұрын

Thank you!

@mindaugasjuska 3 жыл бұрын

Hi, Jon. Thanks for the action. However mine just copies entire room tone to the second track. Can you explain actions from "Trim right edge of item to the edit cursor" to the "Move items/envelope points down one track"? How do you cut exactly the fillings from the room tone?

@jessicadelcid5644 Жыл бұрын

Me too! I have that same problem

@monty671 3 жыл бұрын

Jon, I just got RX 8. Can you do a video (maybe videoS) on using RX... Thanks