I also have no idea what you’re doing with that copper wire.
@InsideStrate2 ай бұрын
Used to stretch spring to hook it back on
@barnes802 ай бұрын
@@InsideStrate I figured it out once I tried to do it by hand lol
@yobwok2 ай бұрын
Yeah. Please excuse my poor video editing.
@barnes803 ай бұрын
Do I really have to shave that bolt down? Can I not just take it out and reverse it? Or can I just leave it off entirely?
@yobwok2 ай бұрын
Of course, you can just reverse it. I did not do it the easiest way. Thanks for watching.
@joeymoss1268 Жыл бұрын
It worked for me thank you
@michaelbrowne479 Жыл бұрын
Thank you my friend, you have added 5 years to my life which is the time I spend refitting the deck belt, have completed your fix and haven't looked back, thanks again.
@LandieGarcia-mr1ng Жыл бұрын
0⁰
@jerryhonkala92962 жыл бұрын
Adjust blade timing cub ltx 1042
@kevintomb3 жыл бұрын
ACTUALLY this is how the diagram for belt routing and pulleys looks on some of Cub Cadets diagrams. I think it was a change they made over the years.
@jamesmerideth31523 жыл бұрын
First off I thank you for sharing this video, I was wondering if anyone could help I've followed and done everything put back together and my pto will not engage, I have the lt1040 and went with a 93" belt, any ideas on what I might've done wrong or missed, thank you
@jamesmerideth31523 жыл бұрын
Update, I've found my problem wires to my pto were broken, thanks again for a solution to the belt problem
@poopiemcpoopnfart23033 жыл бұрын
Can't thank you enough Kirby. My LT1042 went from being a POS to mowing like a champ. By the way, you're modification is actually an upgrade to the next generation design for that same deck. I'm sure that Cub cadet's reason for this upgrade is the same as ours, although they would never admit that. If ever I meet you in person the beer is on me!
@a.l.86183 жыл бұрын
The pulleys are not supposed to be level. The top one is at an angle to feed the belt down.
@kenhall12043 жыл бұрын
Kirby is smart. It fixed my cub cadet.
@liamogrady22773 жыл бұрын
Kirby McKinney you still a champ in my book Brother 😎🇺🇸😎
@yobwok3 жыл бұрын
Thanks buddy
@mrmichaeltscott3 жыл бұрын
2 years later in buying my first replacement belt after this mod. I mow 2 A 3 times a week.
@greenmarine53 жыл бұрын
awesome thank you, it's been 2 months for me and the belt shows hardly any wear, glad I can look forward to at least a full year of mowing two acres. Instead of going threw 2 belts in one summer.
@larrymiller10464 жыл бұрын
Belt kept coming off now u show a better design 👍
@jimbevins65154 жыл бұрын
This alteration works great ! I used the 64" belt. Mowed for 4 hrs. not a problem. My LT1042 kept throwing the belt before I switched the pulley. Thanks Kirby !
@jointedsteel48194 жыл бұрын
T
@chazwhiz4 жыл бұрын
You still boxing any champ?
@kirbymckinney12954 жыл бұрын
I haven't lately. I'm 50 years old, 250 #, and slower 😊 I would still spar some tho.
@chazwhiz4 жыл бұрын
@@kirbymckinney1295 I would like to get the gloves on with you champ! DING DING!!!
@kirbymckinney12954 жыл бұрын
Sounds like fun 🙂
@chazwhiz4 жыл бұрын
@@kirbymckinney1295 Can we connect via another platform or social site champ. Contact me at my email [email protected] if you'd like to chat further about it more privately than here buddy!
Excellent video and I'm going to try it, but I'm expecting maybe to loose some RPM speed on the blades, due to the shorter belt and shorter travel? * EDIT * I followed what you did and have mowed 3 times since moving the pully and going to a 96" belt. BEFORE, the 109" belt would get extremely hot, so hot it would make the belt almost melt and cause it to prematurely narrow and role off of the spindle pully. Now with the new/old style configuration I can mow my whole back yard ( 1 acre ) and the belt is barely warm and I see no problems with mowing or bagging. Thank you for sharing. * EDIT * Nearing the end of summer and still mowing great, back and front yard = 2 acres. Now I can feel confident when I sell it I will be selling a good working product to someone else I want to upgrade to a Toro Time cutter Zero turn * EDIT * It's now year 3 after doing this fix and still on the same Belt, with very little signs of wear.
@nastyku4 жыл бұрын
This still holding up for people? Need to buy a used mower and found a 1040 in good shape with low hours but read some reviews and they looked nasty, belts seems to be an incredibly common issue so if this works that would be nice
@greenmarine54 жыл бұрын
find a used john Deer, Ariens, or Toro you'll be much happier...trust me : try to stay away from MTD products most of them are made with cost effectiveness first instead of mowing quality.
@Vgp-rp4iu4 жыл бұрын
What year mowers have this issue? I have a 2012 ltx1042 and I've never had any issue with any belt coming off. Is it just on older mowers?
@greenmarine54 жыл бұрын
2006, 7, and 2008 models. and it was only on the LT 1042, the LTX took the place of the LT and cub cadet/MTD did what General Motors does. Instead of doing a recall on bad design they discontinued the model, thinking they wouldn't be responsible after that..I hope someone starts a class action
@poorbitchracing32555 жыл бұрын
I tried this on mine but the belt would get really hot Then it would break do you have any suggestions
@justnel45 жыл бұрын
Very interesting. Typically I would like to assume there would be a reason not to simply switch it like this, as the manufacturer typically has a reason for doing this. However just like you my dad and I have been having this problem since I was a kid. I might give this a shot
@poopiemcpoopnfart23033 жыл бұрын
Cub cadet did this same upgrade to this deck post 2007 (I'm sure for the same reason). Kirby's mod is actually upgrading the pre '07 cc design to the post '07 cc design for this 42"deck.
@DaveSomething6 жыл бұрын
thanks! I wish I'd found this video nearly 6 years ago, it would have saved me a lot of time, cash, and blood pressure medication! works like it's supposed to, so far! I used a 94" belt, it's a little tight but it fits with just barely enough slack to get it around the main pulley.
@711600006 жыл бұрын
I had the same issue with a model 1046. I looked under the mower with the deck all the way up and all the way down and it became obvious what the problem is. When the deck is lowered it pulls the belt down off the drive pulley when the cut lever is disengaged. It doesn't come off while actually mowing but when you disengage the cutting while the deck is in the lower positions. If you simply raise the deck before disengaging the blades the tension will keep the belt on the pulley. So always engage and disengage the blades with the deck in the high position. If the belt comes off then it needs to be replaced.
@mrmichaeltscott6 жыл бұрын
It worked! Perfectly! Thank you! The bollt you have to grind, I just flipped it over. I used a 2x2 cut to length to hold the spring tension while I installed the belt. Between the two left pulleys. This is crazy good info. It even sounds way better running! Thanks!
@oyetos6 жыл бұрын
Great post and thank you but am I missing something here, the video skips many times and seems to cut out some important points is there a longer version of this video?
@leelovstad69026 жыл бұрын
Today converted our 2007 LT1042 as described using a slightly worn 954-04060 from our newer Craftsman T1400. This -04060 is specified for the T1400 and the older LT1042 configuration so we're not jeopardizing a new belt with the trial. Our ongoing problem of the Cub rolling and then breaking the belt on uneven ground has not occurred in the hour trial mowing on some of our most uneven plots. I suspect there is less tension on a 96.6 " belt but I'm accustomed to slowing for dense stands so this may be incosequential. Well worth the trial.
@AllDaCraze6 жыл бұрын
Thsnx, for the video. It is the fix I needed for my Scrub Cadet.
@robertmccleery60566 жыл бұрын
I have a 1045 and when I am mowing, the odd time, the motor just stops! The only way to restart is to release the PTO and then it restarts. Any ideas or suggestions?
@petercatrionaarnold-nott10656 жыл бұрын
I made exactly this discovery today. I had bought the belt for the LT1042 and found it was way too short. Bought a longer belt (I guessed the length coz I didn't realize the configuration was different until later). Still no luck. Realized the set up on the mower was different to the manual, moved that pulley, and now the belt fits!! Hope it stays on.
@jeffgrant69146 жыл бұрын
Your right cubcadet went to hell when mtd took over so did Craftsman
@melvinallenjr.46906 жыл бұрын
Give him some more. We want pt 2
@dchez6027 жыл бұрын
My Cub 1042 is a 2007 and had a deck like this. I had ordered a belt for it and it was too short, but after I repositioned the pulley, like in this video, I was good to go. Good information, thanks for posting!
@lesterruffing43717 жыл бұрын
Thank you!!
@nate16437 жыл бұрын
mind posting the link for the correct belt ? thanks
@TheYearOfTheRedDoor7 жыл бұрын
Man, oh, man! You saved my sanity! I have a Troybilt SuperBronco with the same deck. Except my pivot arm did not have the bolt that needed to be ground down. Easy, peasy, fix. Thank you so much. Got my mower back in service, flawlessly cut my knee-high grass. And a fringe benefit is that the new arrangement doesn't vibrate nearly as much, making my 12-year old mower MUCH more comfortable. And I think the cut is cleaner, too. Awesome solution!
@yobwok7 жыл бұрын
Glad it helped.
@loriclark86037 жыл бұрын
It worked!!! Thanks for the video, my husband followed your instructions 2 years ago and it hasn't popped off since. It used to be a nightmare.
@yobwok7 жыл бұрын
Glad it helped. Mine was aggravating before also.
@DTuckerMD7 жыл бұрын
It looks like I may have too much slop at the hole where the bracket mounts to the deck. The bushing is free to move a little due to wear and that's enough to let the pulleys drag. Not sure what I'll do next.
@CharlesMantia7 жыл бұрын
I fixed it. You need to add a belt guide bracket in front of the engine pulley from the bottom of the engine to the wire bracket. bolt it to the body under the engine and then weld it to the wire bracket on the rear of the engine pulley. just a flat thin piece of flat metal to keep the belt from coming off the engine pulley when changing deck height. When in the middle position the belt is way too lose to stay on. Add the bracket and no more problems.
@greenmarine54 жыл бұрын
but the original design causes to much friction on the belt because at cub cadets design the belt is at an angle because the rear pulley is higher than the other 3 causing the belt to heat up get soft and either roll off the pulley or completely give due to the heat and snap in two. It's a failure in design and a failed consumer product.
@MrFreightdawg7 жыл бұрын
Just good ol' boys havin' a real good time!
@calebhewlin36727 жыл бұрын
Hey, thanks for taking the time to film and explain this. Had a belt start jumping off, and i couldn't get it to stop. Moved the pulley like you said, put a shorter belt on, and it runs smoother than it ever has. Really appreciate the help. BTW, i used a 96 inch belt at first, but it was a tad loose, took a few seconds for the blades to spin up, and it would bog down... went and got a 94 inch belt from advance auto, and it runs strong. Also, like another comment below said, i just flipped the bolt instead of grinding, and it worked.
@yobwok7 жыл бұрын
Glad it helped
@rcrobertson95638 жыл бұрын
great video !!!
@yobwok7 жыл бұрын
Thanks. I could have done a better job explaining and editing but hope it's helpful
@yobwok8 жыл бұрын
I used the the part # in the video description and that same belt , that I used in the video in 2012, is still working today. I hope yours will last too : )
@waynesoucie71049 жыл бұрын
Great informative video to solve a infuriating problem with the LT1042. Great job.
@yobwok7 жыл бұрын
Glad it helped
@jeffweber96409 жыл бұрын
brilliant. worked perfectly. thank you very much for posting this.
@yobwok7 жыл бұрын
Glad it helped
@jarradfoster5299 жыл бұрын
I'm just finishing one off at the moment, there's not too many of these around. Can you take a walk around video of it?
@BluemoonBC229 жыл бұрын
Hi, I had the same problem. I took mine to the shop and had them watch your video and make the changes. Worked like a charm!!! The guys at the shop were also impressed. Thanks so much for making this video. Cheers from Downunder!
@whatmeworry86819 жыл бұрын
BluemoonBC22 What size belt did you use ?
@b85douglas8 жыл бұрын
+whatmeworry 97?
@yobwok7 жыл бұрын
Glad it helped
@yobwok7 жыл бұрын
I wrote it in the video description. I hope you get it fixed
@wjoellock10 жыл бұрын
can anyone comment on the belt size difference--3" seems pretty significant...what size should I buy?
@wjoellock10 жыл бұрын
I was wondering if you have to grind the bolt for pulley clearance or can you just take it out?? also does the spring go back in the same location? mine seems to be pulling it way up when re-attached?
@wjoellock10 жыл бұрын
never mind the above...just notice on the lawnmower that the purpose of the bolt/pulley clearance issue is to catch the piece from pulling up when re-attaching the spring...i just flipped the blot without having to cut it and it seems to work fine.
@calebhewlin36727 жыл бұрын
Thanks for the heads up, i just flipped the bolt and it worked fine.
@yobwok7 жыл бұрын
yeah, I should've just turned the bolt around
@augustusgupta886410 жыл бұрын
I've done what you've shown, but the belt still keeps coming off, I wonder if I should try a 94" belt?
@augustusgupta886410 жыл бұрын
i went with a 93" and it works great now.
@augustusgupta886410 жыл бұрын
Augustus Gupta I've done over 3 acres now without throwing the belt.
@rock442608 жыл бұрын
what are the part numbers for the 94" and 93" belts? I tried the one above and it lasted for a while but is coming off again. thanks
@augustusgupta88648 жыл бұрын
A92K/4LK940 Kevlar V-Belt 1/2"X94" A91K/4L930K - V-Belt with Kevlar Cord - 1/2" x 93" Two complete summers and only throw a belt once when the blade hit a stump and came to a dead stop.