Жыл бұрын
Жыл бұрын
Пікірлер
@doriangray2347 9 сағат бұрын
I thank you so much!!!
@MI_Magazine 3 сағат бұрын
You're welcome. Thanks for watching.
@amithans6910 3 күн бұрын
Saved me so much time. The instructions that come with the machine are as clear as mud.
@MI_Magazine 2 күн бұрын
Glad I could help!
@ileanachappel6692 3 күн бұрын
How about the freezer?
@MI_Magazine 2 күн бұрын
Should be the same E26 base 40W. It is accessible just above the top right sliding drawer. Should be able to access without the need to remove any cover but check your specific model.
@LeslieRychel 7 күн бұрын
Thank you, I am an idiot when it comes to this type of thing!
@MI_Magazine 6 күн бұрын
We all are because they don't make the instructions productive. Thanks for watching!
@ajs8972 12 күн бұрын
Your video was very helpful!
@MI_Magazine 12 күн бұрын
Appreciate it! Glad you found it useful.
@akatraypa 14 күн бұрын
You can change the excise time directly in the Generac Mobile Link app as long as your generator is connected to wifi or cellular. In the dashboard click on the Generator then scroll down to Settings>Exercise Settings.
@MI_Magazine 13 күн бұрын
Correct, but you may need a paid subscription to Generac's Mobile Link for changing exercise time. I have the basic Mobile Link (free) and find it loses connection every two months. Reconnecting is a multi-step process that I have now given up on. Easier to walk to the unit and make changes there.
@clare4nys 15 күн бұрын
2024 Dec 21st - just did this for the 1st time - works great - we also feed the birds and feral cats and this works well making a path to the feeding stations
@MI_Magazine 15 күн бұрын
That's awesome! Glad it worked well for you.
@filthiestcanadian 16 күн бұрын
great video but the nits for the shute are opposite. The bolt actually goes into a slot.
@mattrajczewski579 22 күн бұрын
Nice informational video, however you need to get someone else to shoot the video (get in closer) because it is hard to see what you're talking about. i.e. fuel on/off valve position
@MI_Magazine 22 күн бұрын
I hear you on the fuel valve, it was a pain to get a clear shot of it, thanks for the feedback.
@melodeeplath8002 27 күн бұрын
Great content! You explained this machine in great detail. Thank you!
@MI_Magazine 25 күн бұрын
Appreciate the kind words, I'm glad you enjoyed it.
@sarugan1839 27 күн бұрын
Can you tell me which air filter you use for this fridge?
@MI_Magazine 25 күн бұрын
As best I can tell, there is no air filter on the KitchenAid model I have. The back cover is just for the damper control flow.
@Rick-tb4so Ай бұрын
I have one, it surges.
@MI_Magazine 29 күн бұрын
A few others have said the same. Interesting to see if someone knows the frequency or if this is a significant concern.
@andreyalexandrov2016 Ай бұрын
I have the same machine. Impressed. Cant wait to use it
@MI_Magazine Ай бұрын
You're going to love it!
@glenwhitestofer6420 Ай бұрын
You put the chute bolts in backwards, There is a square slot on the other side to hold the bolts in while tightening.You also need to bolt the cable to the chute rod.
@MI_Magazine Ай бұрын
Thanks for the information and for watching.
@glenwhitestofer6420 Ай бұрын
@@MI_Magazine It was a good video,yes Toro's instructions are almost useless.
@bobmaskara6955 Ай бұрын
Ok my KitchenAid has the same plastic cover but the two lights are LED not screw-outs and they are hard to get out do you have a video for that. (Same exact olastic cove rthough)
@MI_Magazine Ай бұрын
Unfortunately, I've not done this for LED replacements. Try this video to see if it helps: kzbin.info/www/bejne/j4DOq2Wcd9KUhas
@bobmaskara6955 Ай бұрын
Thanks for reply. Different kind of light actually two "bulbs" they don't screw out. Got a feeling they are some sort of plug in however on mine and one i tried unplugged in store they t come out very easy at all. Gonna try to get a live body at KitchenAid. Thanks again
@MI_Magazine Ай бұрын
@@bobmaskara6955 Good luck. Hope they can help you figure this out.
@filmmaker5457 Ай бұрын
Awesome! Thanks so much!
@MI_Magazine Ай бұрын
You bet. Glad you found it useful and thanks for watching.
@johnnavilio1978 Ай бұрын
Thanks for making assembly so much easier. Instructions that come with blower are a joke.
@MI_Magazine Ай бұрын
Glad it was helpful! Thanks for watching!
@musicallyllc6436 Ай бұрын
Thank you!! This is a very good video. Very helpful.
@MI_Magazine Ай бұрын
Glad it was helpful!
@jamesorsby7553 Ай бұрын
For a driveway of that size, you would have been better off with the Toro 828 or even the Toro 1030, because that driveway is huge, and too big for a 24 inch machine. No wonder you spent so much time out there, because the snowblower was too small.
@MI_Magazine Ай бұрын
Good suggestions. Thanks for watching.
@glennstanley2892 Ай бұрын
Dude, you need better shoes.
@MI_Magazine Ай бұрын
Thanks for the suggestion and for watching.
@ScreenActingSuccess Ай бұрын
Thanks for this very clear tutorial.
@MI_Magazine Ай бұрын
Glad you found it helpful. Thanks for watching!
@pauln8984 Ай бұрын
Can you set how long you want it to test run?
@MI_Magazine Ай бұрын
Unfortunately, the exercise time is fixed in current Generac firmware. Here is what I found on their support page: Generator Exercise Facts A transfer of loads does not occur during the exercise cycle unless utility power is lost. The exercise feature only operates when the unit is placed in auto mode. 5-minute exercise cycle (non-adjustable). Some previous firmware versions had a 12-minute exercise cycle. Exercise frequency is adjustable: weekly, biweekly, or monthly. If monthly is selected, the day of the month must be selected from 1-28. Quiet Test™ Mode allows the unit to run at a lower speed during exercise to reduce noise and fuel consumption. Available on 10kW - 26 kW units only. 7.5kW PowerPact will exercise weekly for 12 minutes, with no adjustments available.
@rwelch9729 Ай бұрын
Too bad you can't speak English.
@xrpxtrariceplease2811 2 ай бұрын
you might as well do the anti seize lubricant for the wheels so it will not become stuck. Great video
@MI_Magazine 2 ай бұрын
Thanks for the suggestion and for watching!
@xrpxtrariceplease2811 2 ай бұрын
@ Did you set the height of the shoes?
@MI_Magazine 2 ай бұрын
I did not. But this year may look into adjusting.
@seanhill3013 2 ай бұрын
I just bought one used. It surges, the engine does. Any ideas anyone?
@MI_Magazine 2 ай бұрын
The previous owner likely didn't run the fuel dry before storing it, which can lead to clogs in the carburetor, fuel lines, or filter. Try adding Mechanic in a Bottle to see if it clears things up. If the surging is really bad, drain most of the old gas, then add Mechanic in a Bottle at a higher concentration so it can work more effectively. I had a really old snowblower that sat unused for over 10 years and wouldn't start, but using Mechanic in a Bottle directly in the carb and fuel tank got it running again!
@63grandsport11 2 ай бұрын
🏆
@MI_Magazine 2 ай бұрын
Thanks for watching.
@robertbeach6057 2 ай бұрын
I agree with others below that the instructions with the machine are quite poor, and the diagrams are terrible. Toro has been around and long time and should have done better.
@MI_Magazine 2 ай бұрын
Agree, they should do much better.
@Westoftherockiesyourontheair 2 ай бұрын
Very helpful video, thank you!
@MI_Magazine 2 ай бұрын
Glad it was helpful! Thanks for watching.
@MaxAcceleration 2 ай бұрын
Great job on the video. If you just put the pin into one side only you still get self-propel, but it will just turn the one wheel so you can turn easily. In the case of heavy snow with icy conditions that's when you lock both wheels - and yes you lose some turning ability but usually it's so icy/snowy in the conditions to have both locked, it will just slide.
@MI_Magazine 2 ай бұрын
Good suggestions and will definitely try that out. Thanks for watching!
@ElCid-sf8mt 2 ай бұрын
When I first glanced at the poorly written instructions that came with the machine, I nearly had a stroke, they were so bad. However, once I discovered your excellent video, the clouds parted, rays of enlightenment shined , my blood pressure fell from its dangerous level, and I realized this was an easy job. Quickly, I assembled the machine while following your steps. May many blessings rain upon you.
@MI_Magazine 2 ай бұрын
Thank you.
@pjjones4234 2 ай бұрын
The instructions are not "poorly" written, they are shown in pictures. This man is NOT an expert, he's likely an engineer and just a homeowner who is likely installing this for the first time. I did mine yesterday from the instructions and had the same success as he did. Thanks to Toro for a great piece of equipment and instructions EASY to follow!
@jimlevine2832 Ай бұрын
@@pjjones4234 Congratulations on your success, but I agree wholeheartedly with ElCid-sf8mt. Toro, if you're listening: The instructions were abysmal. If you're going to do pictures-only, they need to be a lot better than the ones that come with this snowblower. Better: DON'T make them pictures-only.
@MI_Magazine Ай бұрын
You're mostly right. I'm not an engineer though. My view is that Toro should provide instructions dumbed down to the level of a person who is a homeowner and doing this for the first time. They can also provide a high-level pictorial for people like you who are more experienced.
@dirkpittthegreat4559 2 ай бұрын
Thank you!!!
@MI_Magazine 2 ай бұрын
Glad you found this useful and thanks for watching!
@bettyglenn5323 3 ай бұрын
this didn't work for me, I had to drill a hole in the drywall first, then use the hammer to gently pound in the anchors, then manually screw the curtain rod hangers onto the wall
@MI_Magazine 3 ай бұрын
Those are good tips to try if things don't work as planned. Hope it ended up firm and holding up the rods/curtains for you.
@arvestrandsphotography 3 ай бұрын
15 minutes and still not started the machine.....
@MI_Magazine 3 ай бұрын
Thanks for sticking around through the first 15 minutes! We will try to make these parts more user friendly for people at your level in the future.
@punavi82 4 ай бұрын
Hi.. please can you let me know if the carpet tape affects the hardwood floor finish?
@MI_Magazine 4 ай бұрын
In the 20 months since I installed the treads they have stayed on great. So, I've not had a chance to remove and check for any damage to the wood. Check the manufacturer's page. According to them, this is residue-free and hardwood is on the list of suggested floors.
@Cryptony1975 Ай бұрын
Would you have used the self stick treads that allready have the adhesive on the back? Self stick treads on Amazon. I'm thinking about buying those to avoid cutting tape. Thoughts ?
@lisacompton5677 4 ай бұрын
Thank you. This was exactly the info I needed!!!
@MI_Magazine 4 ай бұрын
Glad it was helpful!
@MultiSmurf67 4 ай бұрын
good job. very nicey done
@MI_Magazine 4 ай бұрын
Thanks for watching!
@jasonhawthorne1872 4 ай бұрын
Appreciate the video but using these drywall anchors requires using silver screws on a dark bracket. Sorry but that would be an eyesore in my house.
@MI_Magazine 4 ай бұрын
Hope you find the color you need.
@peasoupandersensinnbuellto5788 3 ай бұрын
Cover the screw with nail polish in the correct color.
@susieqqq7526 5 ай бұрын
I am looking for replacement cartridges for HP 8130e printer, they take the 923 ink, but can't seem to find a generic version of each color. The original HP, are way out of line $$ for ink!!! Anyone find a less cost effective work around?
@MI_Magazine 5 ай бұрын
Hope someone can help with this. Thanks for watching!
@rosalindveasley6166 5 ай бұрын
Thank you 🙏🏽
@MI_Magazine 5 ай бұрын
Glad it helped and thanks for watching!
@evafrew4584 5 ай бұрын
Thanks for the video. You made it look simple which is good as this will be my first attempt. Thank you.
@MI_Magazine 5 ай бұрын
Glad it helped and thanks for watching!
@MarkMeadows90 6 ай бұрын
I like the simple single cylinder engine for the S100 and S110 models. Easier to work on. But I'd rather have the S120 with the 22 HP v-twin engine. Smoother operation. The S120 models have the electronic LCD display for fuel level read outs and also has the usual hour meter as well. Nothing runs like a Deere!
@MI_Magazine 6 ай бұрын
@MarkMeadows90 Thanks for watching and for those great points on these machines. I agree, Deere really knows how to make a good product!
@coquittam1012 6 ай бұрын
This was informative. Now I can make my own cross for Palm Sunday. All these years I had no idea how to. Thank you!
@MI_Magazine 6 ай бұрын
Glad it was helpful!
@hollyedge7218 6 ай бұрын
Thank you!
@MI_Magazine 6 ай бұрын
Glad it helped! And thanks for watching.
@Wintxrdominoz 7 ай бұрын
Good
@MI_Magazine 7 ай бұрын
Thanks for watching.
@stxrsfor3v3r 3 ай бұрын
That’s so cool!
@terri4478 7 ай бұрын
You don't show us shit.. your hands in the way you don't even show us the anchor come on
@philipblackburn3759 7 ай бұрын
Pump it from the snowblower into a can on the ground. Then lift that can up onto a higher level bench over the top of the mower, thus using gravity both ways (saving having to manual pump all the fuel), and complete the transfer.
@MI_Magazine 7 ай бұрын
Excellent suggestion! Thanks for watching.
@It.is.I-tx6ri 7 ай бұрын
Thank you so much!!!!
@MI_Magazine 7 ай бұрын
Glad it helped!
@Beckel_ 7 ай бұрын
Just bought my 2024 s100! I Can’t wait to mow next week. Great video 😊
@MI_Magazine 7 ай бұрын
Good choice! Enjoy and thanks for the nice words.
@Beckel_ 7 ай бұрын
@@MI_Magazine update! I got a 2024 S180 54 inch deck one instead! Lowe’s price matches so I was able to find an insanely sweet deal online. I ended up paying $2000 less for the mowers original price!
@manning8 8 ай бұрын
Everyone looks miserable
@MI_Magazine 8 ай бұрын
Travel can be tiring, and people might not always look their happiest just before overnight flights to Europe.
@rapturebound197 9 ай бұрын
I have a Maytag and the lighting looks to be the same as your video. However when I pulled out the old bulb there was no number on the glass of the bulb to tell me what replacement bulb should be. The only thing I see is on the screw in metal part of the bulb which is stamped 120v 40W CHINA. The model # on the fridge is MFF2558VEM10
@MI_Magazine 9 ай бұрын
It would have been nice if they had the bulb size also there such as A15. Sounds like the A15 linked here should work for you. It is a 40W equivalent and the E26 base is quite standard for fridge bulbs. Also, try this link for another option: www.maytagreplacementparts.com/Shop-For-Parts/a4b4i441d698617/Model-MFF2558VEM10-Maytag-Refrigerator-Light-Bulb-Parts
@rapturebound197 9 ай бұрын
@@MI_Magazine you're awesome to get back with me so quickly. I still have time to run to the hardware store and get those bulbs you recommended. Much appreciated! 👍😉