it's $4000-$6000

No link in the description??

1:21 looks 🔥

:30 ish says give you clean surface top and bottom of your material????? blind leading the blind I guess ..... sounds good to those that have no idea what there doing, which is probably your customer base right. just a shame they have to spend thousands of dollars to find out

How is the pin match between arduino and Gshield v5?

Can you make it 4x4 easily?

How do I create items to specific dimensions or know what a dimension is within an object?

1St comment after 11 years 😮

So the main thing people are using CNC machines for is for signs? Really?

What is this for?

how do you change the finishing bit to a v bit

Can I buy from India?

Dude. Please talk slower!

General question, if you don’t have a vacuum table will it be fine to run? Or can you add tabs to prevent pieces from running away?

When i do the finishing pass it doesn't do what its suppose too. It goes where the material isnt. and it says its finished when its only just begun. Any idea what im doing wrong?

WHAT Does CNC stand for? If you're going to use an acronym, you should at least tell the public what it means. I hope you reply. I just noticed your video is 3 years old.

I'm in Australia, using Easel Pro. Is there a way to add my machine ? as inventables don't recognise m machine yet.. Machine is Queen Bee 2 made by CNC3D here in Oz.

I have to share this story about my X-carve. About four years ago my father was in kidney failure and hospice was called in. He had about three weeks left. During that time we got to spend time with him. He and I one day were talking about what I planed to do as I neared retirement. I told him I planed to spend my days in my workshop. He had taught me wood working and it was a hobby we shared for all my life. He said :you should get one of those carving machines." He didn't remember the name, but I said "an X-carve? I plan to get one once I retire" We played with Easel and looked at the machine on my computer. So Dad passed away maybe four or five days later. A week or two after I came home from work and my wife said "you have packages in the front of the house." I assured I had not ordered anything as I walked to the front. The second I was the boxes labeled X-Carve I broke down. What I didn't know is after my Dad and I talked he told my sister to order one for me after he was gone. One last gift from Dad. My only regret is that he and I never got to build with it together. I do, however, talk to him while in my shop to this day. I'm quite sure he's there with me -

Has anyone every tried Cedar? I am not saying to use it for Cabinets,etc... I am just wondering if there been any issues using cedar

Has anyone every tried Cedar? I am not saying to use it for Cabinets,etc... I am just wondering if there been any issues using cedar

Where can I find the stl, paid or otherwise, that you show in the thumbnail and on your Easel homepage in July 2024??

Way to answer all the questions from the comments!!! FAIL!!

Thank you! 😃

For what you are charging for Easel Pro the software is crap. Should be able to gray out objects to set to not cut, No snapping, can't change between fonts without starting over, the "apps" should be built into the tool bars oh wait the tool bar is crap too, there should be more zero home point options .... there is so much more........ Can,t wait for lightburn to release MillMage.

Do you guys have any videos on acrylic? Very educational but I am a visual learner and would like to do carved acrylic invites for my daughters sweetb 16 and not sure how to go about the proper settings for TTC 450 CNC router and using easel as my software.

On the wavy flag, how do you carve out the stars? Will the finishing bit (1/8” ball nose) do the same job as a 60 degree V-bit? Thanks! Hopefully I can get a response.

I want to buy this machine through the genuine company's website

what is max Z cutting hight? also- what is the widest piece of wood you could put between the rails? most 4X8 ply is 48.5" wide thank you

Does this output standard gcode? How do I find post processors that are in it?

Hi I'm using the 3018 Pro machine but I'm getting unwanted cut lines when the machine moves around the project any idea why ??

Hi I'm using the 3018 Pro but what I'm getting is unwanted cut lines that are spoiling the projects as the cutter is moving from different areas of the engraving ant idea what I can do to prevent this

Awesome. I can't wait for this feature.

How to drill hole grids

Is this included with an easel pro subscription?

The only thing that is keeping me from buying one is I have not seen cutting 4x8 sheet

Is does easel has same feature as aspire vectric has? Like 2.5D Text cad cam?

I am looking for bright color flexible materials I can make custom dash covers out of- smooth and easy to wipe clean also

hi! my question is: why ont see this tabs on 3d preview? thanks

40 inches per minute is really slow. Can this go faster than that? What is the fastest that this machine can go.

I'm seriously considering getting the X-Carve for my woodworking projects. I've heard great things about it and it seems like a game changer for me! 💪🔧

It seems the inlays for this software really such.

My dream is to start a guitar business and having one of these machines would make that possible.. i hope to own one some day

I just found you guys and this is SUCH an awesome product, hope to get me one in the future when I get my own home. I work for a CMM, Coordinate Measuring Machine, software company so definitely respect all the work I can see from your software. Keep it up!!

Trying to cut out a guitar neck. Bought an STL. The problem is the tabs. Does easel know that you cut the front out and adjust once you flip the piece over? I dont think it does.. Itll probably just cut the tabs off.. Would love to see a video where you cut the front and back of a 3d stl file carving.

Their was a time when everyone was talking about xcarve. Now everyone is talking about onefinity.

scolpire una foto in 3d su legno

Is there an option to use dados and will the program accou.t for those demensions.

Can you guys add option to use other languages for text. Thanks.