Is repainting this a must?

I just got my canopy in for my Ranger. I also ordered a 270 awning. What size crossbars do you recommend?

Can I ask what brackets u used for ur awning please

Have you had any issues with the UCA???... i want to get a set but they are rated for 3" but im not at 3"

How do you rate the Steeda progressives over the Eibach Performance springs?

Can you link the channel for install instructions? I'm in the process of placing an order for an f150. Did you confirm measurements? The rep I am talking to has sent me measurements but they seem to be off for my 5.5ft bed. They use millimeters so I've had to convert all of my inches to millimeters but it's off. They said 62.2 inches in width and my bed width on center of the rail caps is 65" at the narrowest part and it's 67" in length and they said 65.55" in length. To me this just isn't right... I can't order it if it's that far off.

Would you like to help come do my jeep lol I’ll pay

Where can I order one for my truck?

I do believe a presentable undercarriage is important these days.

Very good. I am going to do my Landrover Defender the same way and was wondering whether to use the rust converter first on the diff and suspension parts. I have already changed my chassis for a Galvanised chassis , but I think a coating of wax will be beneficial as I want to keep this Defender. So, you have convinced me to use the rust converter first. Thanks for the video.

Lanolin products are a gimmick . Just don’t last long enough

Did you install light bars inside the canopy. And by what method. Screws tape etc Thanks

What bumper is that?

Great 👏👍

Looks fantastic mate and all your videos have been fantastic and really good. I am thinking of doing an F150 kit and heard that i can savevas much as £2'000 if going Chinese

Cheers mate

Well done! Can you send me the links for the Parts?

Stumbled across this and great to see someone else with the idea of using the patio cleaner upside-down. I have the same one and just fitted wheels to the top to clean under my Defender. Haven't tried it yet but I'm encouraged by your results.

May have been cheaper & easier to have a custom steel bumber fabricated by a local steel fabrication company

Nice video. I'm getting something very similar. You mentioned after the rain you had a few leaks and you used a silicon tube. What colour was it clear or black? And when you mounted your awning are you running a roof rack or just a single rail on the canopy that comes standard? Cheers

@chris spooner motoring - did you do the raptor coating yourself or paid a company to do it? How is the coating holding up after a year?

😮 looks way better

What a fantastic idea using the patio cleaner, top marks there must try this myself 👍👍👍

It removes rust, but this cool look will not last long. You have to cover it with some oil or wax to be protected from water. Otherwise rust will get back in a few months

Using your rattle gun on the axle nut makes easy work of it. You don't even have to remove the locking dent if you've got a full battery. It will just spin off. It's also easier to do this with the wheel still on and you won't even have to worry about the hub spinning. Also, if you loosen the bolts on the upper control arm, it will fall into the steering knuckle and there's not even any need to pull it down with a ratchet strap or by hand. If you remove the sway bar, you'll get more movement that makes it easier to pop the axles out. It's easier to do this while the vehicle is flat on the ground. When removing the axles, you can hold the axle at the back and keep that pushed hard up into the CV so that it doesn't separate. Alternatively, you could tie it so it won't pop out. If you drop the diff oil out, it's a great time to put new seals in, but it is worth getting something descent to press them back in, especially on the driver's side because it's recessed. It took me quite a few attempts as it kept popping out and now I've got to keep an eye on it to make sure it doesn't fail. I'll be removing the front diff to put an ARB air-locker in soon, so I'll address it then, but it's good to know if you have to go down that path.

Funny you mentioned the 35mm. Everyone says 36mm, but I tried mine at the store and found that the 35mm fit perfectly. Having a 36mm is good for aftermarket CVSs though. A lot of them will have 36mm nuts.

Take bed off and sand everything by hand to see how bad the rust is

May I have the link for where you bought the kits? Thanks

Made in China?

No way av got that exact Subaru Forester xt but mines red and manual and a 2.0 did you own the 2.5 or 2.0 am gonna rust proof mine a took it for mot 2 weeks ago expecting it too fail on rust it flew through its mot , the subframe looks rusty so am gonna lanoguard or underseal it immediately

I really like the fitment on the front fenders, what make are they and where did you source them? I've been considering using OEM raptor ones from the scrap yard.

Ok yes

Where do you get the front lights from?

how much does ot last ? before rust points apeear again??

Good job. For beach driving in Australia, we use either fisholene (fish oil) or lanolin. Apply it with a pump up garden sprayer. Much easier on the wrist/fingers!

I couldn’t imagine shifting with my left. I guess you’re born into it if you live there. Or just get used to it.

Nice looking truck Chris, well done mate 💪🏽

How did you tackle the tailgate lock, they don’t have one as standard do they

Where did you get your flairs from

hi chris how did you connect front headlights to old plug cheers

Hi mate! Have you found of or heard of any other steel front bumpers for the Ranger that’s being sold by a UK supplier? Thanks

What canopy is this I can’t find anything on this video or comments to tell me where it’s from it’s exactly what I’m looking for ?

Rust is our enemy.. And it seems to be winning..😂

Und wie sieht er aktuell aus?

How much did you need of lanogaurd?..doin my vw t5 wondering how much to order thanks....great job btw

What is the vertical size on those ramps ?

How and what have you done to stop that scrubbing I’ve just bought some fuel 20x10et-18 and same things happening so what did you do before I go cut the bumper lol😅

So it worked? 😭😂

the first product you used have you got an alternative product I can find online like a name or something. also with the second product is there anywhere you should avoid, I can’t tell but did you avoid the exhaust system. just got a 2018 ford ranger and going to take it through costal cities so want to avoid rust and keep it protected. thanks for the vid