Does someone know how to reset the password i bought an e bike but the display already has a code set up and i have not founded any video regarding the Password Recovery or Reset and the guy who i bought it from does not answer my calls or messages
@HorizonMicromobility3 күн бұрын
You will need to contact Tenways support, you will need proof of ownership
@andrewherrera27363 күн бұрын
@@HorizonMicromobility i have the bike but thats all i have the guy i bought it from was about to throw it away he was on its way to leave it sitting on the dumpster now my question is if i happen to change the display to a different one will it actually allow me to set up a new code and access into the bike modes or will it put a lock on the motor also?
@noexplanation43435 күн бұрын
Cruise control!!! Let’s go!!! I thought it didn’t have… put 400 miles on mine too😅
@Thecarandfortniteguy7 күн бұрын
Does this effect the range of the scooter?
@HorizonMicromobility7 күн бұрын
yes of course, if you're going faster then you're using more power so the battery will drain faster
@ameen_11 күн бұрын
there's 0 comments here about how to increase the actual speed of the scooter SADD
@pujanomaly12 күн бұрын
Does this fit on kiox 500 display?
@HorizonMicromobility12 күн бұрын
Yes it does. The grip will fit on the Kiox 500, Kiox 300 or retrofit mount
@aurianoaguilerayserna490414 күн бұрын
25 after 33 thanks
@allenliu882025 күн бұрын
im still having issues with this scooter it wont reach the stated 20mph it only reaches 11 mph on flat terrain even after this trick
@HorizonMicromobility25 күн бұрын
It could be faulty, contact the shop.
@allenliu882025 күн бұрын
@@HorizonMicromobility I tested it today and it reached a max of 14 mph, so I guess I do have to send it back via warranty. edit: the warranty only lasts for a year, so this dying out means that I would likely have to pay for the replacement part, but i might just instead buy a brand new scooter from elsewhere since I was already looking into some faster models from other brands
@Hennessy3035Ай бұрын
Can you do a alucard electric scooter?
@sverreottosen6643Ай бұрын
Hey i tried removing it but it did not work. I have a VGA Maxi 10" 36V-6.4Ah. Can you help me
@xavierhoward8227Ай бұрын
I don’t have p4 on my turbo ant max7 only goes to p3 and the ff doesn’t show up
@user-wy8eh8px1h2 сағат бұрын
same
@ronaldadams2313Ай бұрын
I have a hover-1 scooter and mine don’t got dat
@theman-pc2ejАй бұрын
My display is good but my kid broke the dark clear cover that is on top... I can't find it anywhere! Even email turboant and nothing in responce.. sense I never seen this part by its self either can you lead me in the direction where I can find the cover..id appreciate any help you can give..thanks in advance.. its an x7 pro basically same as one in vid
@HipHopPojuАй бұрын
mine doesnt let me go to settings, when i press both buttons it just turns off. what to do?
@jordanharms6048Ай бұрын
Why will my scooter turn on but not accelerate
@HorizonMicromobilityАй бұрын
Could be controller, motor, throttle or battery - you'd need to take it to your local repair centre.
@GoodWerksHelpingАй бұрын
i have the x7 and it dosent go higher than p2
@alikarakoc6550Ай бұрын
Hello, although I increased the p 15 value, the speed of the scooter did not increase.
@pilot0672Ай бұрын
I have the same one but MS energy e21
@user-tx1yl9xw3lАй бұрын
How do you change the time?
2 ай бұрын
i got the nc81f display i dont get the 1-3, 1-5, 1-9. anymore first i could get does, but now i can only select 0-3, 0-5, 0-9. i want to put the power assist pas levels, so i can put it on pas 1 say 20% power pas 2 40% pas 3 60% power pas 4 80% pas 5 on 100% but i only get the 0-3, -05, 0-9 in the screen. how do i get it back so i can see them all ? and then change the power/pas levels ?
@user-eu3uc5oi4f2 ай бұрын
MS ENERGY E21 NOOO X9 SCOTER
@ryanpjk-sproule38132 ай бұрын
Where can you get the actual rear wheel for this my valve came out of mine and I can't seem to find anywhere online to get another rear wheel for this
@HorizonMicromobility2 ай бұрын
On our website. www.horizonmicromobility.com it's only the inner tube you need if the valve is broken!
@ryanpjk-sproule38132 ай бұрын
@@HorizonMicromobility but it's the whole valve gone entire hole where it used to be also its tubeless tires the one I have so I'd need whole new rear wheel with motor ...?
@HorizonMicromobility2 ай бұрын
@@ryanpjk-sproule3813 They're not tubeless on this scooter
@ryanpjk-sproule38132 ай бұрын
@@HorizonMicromobility really are you positive? I dont see tube inside but thanks I'll look into it
@andershoel782 ай бұрын
Do they think magnets grow on trees?
@HorizonMicromobility2 ай бұрын
What?
@andershoel782 ай бұрын
@@HorizonMicromobility How can one change ballbearings in the engine.
@HorizonMicromobility2 ай бұрын
@@andershoel78 No idea - sorry. Quicker and easier to replace the whole motor
@andershoel782 ай бұрын
@@HorizonMicromobility Those magnets are expensive.
@noteneslimite2 ай бұрын
Do you sell the Axa frame lock? Do you have a link to the shop?
@HorizonMicromobility2 ай бұрын
You can purchase the frma lock bundle here: horizonmicromobility.com/products/axa-frame-lock-chain-and-mount-for-tenways-e-bikes
@sannavuorenmaa8992 ай бұрын
Help mine just turns of
@HorizonMicromobility2 ай бұрын
Sounds like you need a new controller
@SHYZBLACC2 ай бұрын
Whats the name of the scooter 🛴 n how much is it ? Info
@HorizonMicromobility2 ай бұрын
HX X8, they are about £400
@SHYZBLACC2 ай бұрын
You have a link I can check out
@rubenguzman17792 ай бұрын
why do you keep skipping over connecting and disconnecting the cable from the brake lever -__- come on this is the only part i'm stuck on
@HorizonMicromobility2 ай бұрын
You just remove it from the lever
@thebanditsix2 ай бұрын
I have the Decent x7 scooter, battery not charging despite red then green light on charger coming on.
@HorizonMicromobilityАй бұрын
Probably need a new battery.
@Kinopio7103 ай бұрын
Is it normal for the inner rim to shake around while the new tube is flat? I don’t want to fill it to find out it won’t fit. I’m using a new tube and the original wheel so it should fit
@HorizonMicromobility3 ай бұрын
If it's flat then you will need to replace anyway, when replacing check it's the correct size
@Kinopio7103 ай бұрын
@@HorizonMicromobility it’s okay I found that it was just put on wrong and after puncturing it multiple times trying to get it on, I managed to get it on with the levers and took it for a spin to the market it turned out okay
@OmarZapatasequeira3 ай бұрын
Cómo se le sube la velocidad
@Pav_Plays3 ай бұрын
Thanks! Noticed this scooter’s display was the same on the ENGWE Y600. The manual doesn’t mention this at all so this video helped me switch it from KPH to MPH.
@HorizonMicromobility3 ай бұрын
That's great - glad to hear it worked for you
@efrainaguilar67844 ай бұрын
What are the symptoms of a bad controler?
@brenthleynard68344 ай бұрын
Hello! Does it need rim tape before applying the sealant or not?
@HorizonMicromobility4 ай бұрын
No it doesn’t 👍
@arminpintol40334 ай бұрын
What is the white wire for? Speed limit ?
@jayveebustillo20394 ай бұрын
whats the problem when it always beep, and the display looks like malfunction always display "EC"
@agyemangrafics72164 ай бұрын
And where can I order this , as the website doesn’t work ??
@HorizonMicromobility4 ай бұрын
No longer available
@agyemangrafics72164 ай бұрын
Hello, how much can the carrier rack carry in kg ?
@juanantoniogodoycontreras6274 ай бұрын
Hola el mío no acelera q podría ser
@juanantoniogodoycontreras6274 ай бұрын
Hola yo tengo un problema prende todo pero no acelera que podría ser
@juanantoniogodoycontreras6275 ай бұрын
Mi escooter no acelera nose que le pasó
@jkq3115 ай бұрын
that screwdriver, does it come in that hexagonal roll up cylinder?
@HorizonMicromobility5 ай бұрын
It’s a Phillips screwdriver but you need one with a long shank
@jkq3115 ай бұрын
That isn't what I was asking. Where did you get it from? Was it in a set? wHAT IS THE BRAND OF IT?! it looks like a decent precision screwdriver. WHERE ARE THE ANSWERS, MAN!?!? @@HorizonMicromobility
@HorizonMicromobility5 ай бұрын
@@jkq311 you asked if it was came in that hexagonal roll up cylinder. As that didn’t make any sense to me I answered as best I could. I really don’t understand your attitude.
@HorizonMicromobility5 ай бұрын
@@jkq311 and it was from local DIY store
@derkommentar30065 ай бұрын
What the f is a mile?
@HorizonMicromobility5 ай бұрын
A mile is a unit of linear measure equal to 1,760 yards, still used in some countires who refuse to adapt and change to a more logical system.
@s.a.82312 ай бұрын
Wie kann ich die Geschwindigkeit erhöhen? Der CGO800s unterstützt leider nur bis 25km/h :)
@HorizonMicromobility2 ай бұрын
@@s.a.8231 You can't...unless you can find a VERY steep hill!
@alisonellis8435 ай бұрын
Good evening i had to replace my back brake cable as the last one snapped it look so easy but for some reason my steel cable wont go all the way through it seems to be stuck have you got any ideas that i can do to make it easy to do thankyou
@HorizonMicromobility5 ай бұрын
Probs easier to replace inner and outer cable at the same time
@CanalHottuning5 ай бұрын
Could you tell me the color of the wire that connects to the on button? Thanks.
@HorizonMicromobility5 ай бұрын
Don’t know - sorry
@karolslz61855 ай бұрын
You know how change max speed kt 900s
@HorizonMicromobility5 ай бұрын
No - sorry
@SorraK95 ай бұрын
Thank u I’m doing that tomorrow thanks bro
@HorizonMicromobility5 ай бұрын
Good luck!
@joeyduignan3412 ай бұрын
Did it work???
@HorizonMicromobility2 ай бұрын
@@joeyduignan341 Sure did
@83heineАй бұрын
Is the another way??? Or can the seller that I bought it from have blocked the menu?? Because I can’t com in the settings menu to change speed
@kristianomorris304622 күн бұрын
@@83heinesame here 🙁
@Stezo16 ай бұрын
For those that are asking FF is "fucking Fast" your welcome 🤗
@HorizonMicromobility5 ай бұрын
😂
@kennystump14006 ай бұрын
Why does mine only go up to 3 if I click it again it goes back to 0
@HorizonMicromobility6 ай бұрын
Must be what's hard wired for the make of scooter, probably to meet local legislation
@DJBIGFOOT5STARZ3 ай бұрын
Press the brake handle and the two buttons at the same time when you are on P1
@sohaibyahia94436 ай бұрын
hello, what is the tool you used for those screws? 1:55
@HorizonMicromobility5 ай бұрын
Phillips screwdriver
@thomasmayweather7556 ай бұрын
Very helpful. Thanks
@HorizonMicromobility5 ай бұрын
Glad it was helpful!
@flashh3es6 ай бұрын
Mine was classic at 30 kmh... but after this trick it goes 42kmh THANK YOU SO MUCH