Sadly not at the moment but think if there is a way to direct drive of the front crank pulley. She is getting a paint job and all bits sorted this winter when it all parts arrive

I think I would get a gilmer cogged belt setup and try that. The only problem would be the crank pulley something would have to figured out for that.

You could get a single gilmer belt and run it from the water pump outside of the regular pulley and directly to the power steering pump.

Like you thinking was also thinking off having the same set up but doing a double belt this steering system isn't original as that part was missing so fitted an agrline one which they now do the same set up but with a double belt drive. And if I was to convert her back to dynamo she would then be able to run the slight thicker belt also

U should be able to sadly for me my clutch plates were warn and only way to part it was to remove seal.

@@corriedalefarm thanks for getting back to me.I have a 1991 7610,good little tractor,but I seam to be chasing annoying little oil leaks. I hope you get everything sorted on yours

@@DAVIDWARBURTON-mu9ok it can be done but there is a steel dust guard that is tightly pressed onto the shaft with the seal behind i had to chissle my one off to get to the seal then i welded it with tacks to and sanded smooth not the best but it works.

On it stay tuned as will sort sort something out for u

Thank you yer just seen urs for the first time today and new as soon as I was watching that I had to sub so look forward to watching more as time allows

I have been working on old engines for many years but a few years ago someone suggested that I start putting up some videos so others could see how I bring old rusted up engines back to life again. A fun hobby for sure. @@corriedalefarm

Same with me love getting old things running hard sometimes getting bits but the fun I think is finding parts and the reward is getting it running.

Where on the islands do you live?@@corriedalefarm

It lovely just step and a bit soft and sleepy in places had to lead the coms poeple up so poeple could keep the mobile working

@@corriedalefarm oh that's cool

Not sure to be soon if the weather warms up

@@corriedalefarm can't say I blame you

Will do and thank you for the feed back.

Meaning as we not Australian

Due to the carbon built up she has run none stop for 3 months so not to bad tho

Can't rember of the top of my head but I think it's under the key switch or around that colum I will have a look and get back to u tomorrow. Also check connection on starter and battery pluss the earth connection

Hi there sorry its been a while but I found all what u after and it all under the seat

Yer same her don't think it works will be a vidoe in a couple months as we get her out of storage and get her running to take in the field again.

I would say the clutches is stuck or maybe need adjustment

one i bought for 2500 gpb and the other 5000 sadly they need some work but they work so its something

Good excuse me, I'm a mechanic but I'll give you a detail with a Forson tractor, better I wasted time I was looking for it between the injection pump but it doesn't want to burn i have to translate this is what you said converted to English i am more then happy to do a video for you to show you in more detail what you are wonting to see. just let me know

That they are some may look old and rusty but alot can do a day's work and probly out do some of this modern stuff

I am not a 100percent but think she was around early 80s sadly I no longer own her she was swaped for a roadless 75 which I plan on rebuilding one day

thank you

Its a super 4

May have to catch up at some point don't suppose u also have some pics of her

Have look into it 👀

new video coming in the next couple weeks hopefully she should be going just got the head back so time to fit it all together

Thank you that sounds like a plan

Thank and the same to u

Thank you would u believe it on way to farm fuel hose poped off covered truck in diesel not a problem clip on pipe and sorted pmsl I was wrong the fuel had got on the th clutch plate and know is slipping like mad got her to the farm but ha ho. More in the next vidoe.

yer sadly i got this one to strip to build my cralwer up but as this one was in such good nick didnt have the guts to also found out my grandad used it when he was young on the farm i got it from sat in a shed for 18yrs and this is her running stright out no work done also drove to my weeding know she sits in a container waiting on a few little things but well be out in the next couple months early 2023

Can u give me more info on this as guesing it is a site

@@corriedalefarm of sure; take a look on Telegram FAQ and in the wikipedia. u can dowloand the app in google play or play store in your phone; this platform not is alowed post links; big hug to all, see ya

Thank you for ur comment. Yes have to say working cloths way better. The old major has a head gasket and twisted cylinder bolts at the moment but hoping to get her sorted soon. Main tractor on the farm is the super 4 county. If all goes well will be adding a 7610 4wd to the mix also. Pluss my 774 when I get her finished like the 754.

Me gustaria encontrar.un Forson major..como ese para comprarlo Tube uno en Cuba Pero ese Sistema Diabolico.me lo Robo Cuanto me gustaria tener uno haci para recontruirlo Dejarlo como se sacaban De la ajencia que estava en Colon provincia de Matanzas Cuba

Cool never thought of T for tank R for return would make it more simply lol

Cool thank u.

Hoping to if all goes to plan

Would be nice to make something from this but sadly I am from the falkland island and you tube wont let us do it here

Sorry no kinda new to all this tobe fare will check it out thank you for the tip

Sorry to be pain but what is it that I should do.

Had a look and thinknthat just cheating

She is in the process just waiting on e gine to have liners fitted will do an update once I get it back ready to build

Sadly no I had change all sorts but in the end converted it to an alternator which is simply todo. Know just got to get the bit to do the taco as she didn't have the bit above the oil pump but going to do it after I finish the 754. Soon to be video update plus county cralwer another super 4 pluss the old fordson is needing a head gasket.

sorry for the long wait but have been waiting for spares and as she is getting a full rebuild. will take a video around and show what has been done so fare with in the next 5 to 10 day. thank you for comment wasn't sure if people were into this sort of thing.

Just got the engine ready to rebuild like waiting s life time so will be uploading on that soon