I'll be looking into this. It's simple tech that I know works. Same type of intake screw design that our big Agricultural tractors use on thier filter assemblies.
@philipkrolikowski42482 ай бұрын
was it really necessary for the exposed breast and crotch shots to make the video ?
@Dronerangerspro3 ай бұрын
Do you guys happen to have an install on a 2024 Kawasaki TERYX KRX4 1000 SE eS? It looks pretty straight forward and my only concern is how and where to get to the air intake in this model.
@SimmCity36 ай бұрын
Are you going to have something for the 2024 Pro R soon?
@VETSINCRYPTO Жыл бұрын
Please show an install for Can Am Mavrick X3z
@rcclassiccrawlers4368 Жыл бұрын
I wouldn’t want that box mounted there because it would block too much area of rear view. Not to mention the corny dryer vent hose being used. The least you could’ve done would be to use rubber hosing.
@Roostfactor1 Жыл бұрын
Looks promising but how much suction did you have? I would guess if you had a lot of cfm going through your system it would work great! But how does it work in real world scenarios when engine demand is constantly varying, especially for the non racers?
@KWTFilters Жыл бұрын
The KWT uses the induction of the engine to pull the airflow through the particle separator and removes up to 98% off all dust and dirt before reaching the stock air filter. Dyno test results are posted on the website here: kwtfilters.com/pages/how-it-works. No reduction in power or air flow restriction. Works best for the every day UTV driver in all conditions. There are several independent reviews and tons of testimonials of this but this one might help: kzbin.info/www/bejne/oquUlHRna9Seh8k. No power required and no noise for an enjoyable user experience.
@KWTFilters Жыл бұрын
@@Roostfactor1 Thank you for specifying that John, you are correct! It is slightly more efficient at higher RPMs, however it has been tested at lower RPMs cruising around as well and the efficiency is still comparable to that at higher RPMs. We have more testimonials on our website as well! kwtfilters.com/pages/testimonials. We love hearing from our customers how great it is working for them!
@Roostfactor1 Жыл бұрын
@@KWTFilters And thank you for the clarification! I'll give you a call to place my order.
@lalo-Espinoza Жыл бұрын
What about the power?? Where u connected to??
@jameskerns3530 Жыл бұрын
Is there a way to install if I have a rear windshield on my Z950 ? Thanks
@jeffsalazar4537 Жыл бұрын
Amazing product. I can't wait to order o e for our talon. thanks for sharing
@Blueknight1960 Жыл бұрын
To me that dryer hose going up the back looks like crap and not very well thought out. For $500 there should be a molded plastic duct to take the place of the dryer hose.
@nevadafalconry Жыл бұрын
I agree. Looks pretty lame. I wonder if 4inch ABS would work?
@dougford7568 Жыл бұрын
That was very helpful, thanks. Do you have a solution if the z 950 has a rear windshield installed?
@stefanc22422 жыл бұрын
I know there's a lot of clutch noise coming from that factory intake which is a big complaint of people with an X3. I'm assuming you can block off the factory airbox entrance behind the seat now? Does the particle filter knock down the clutch noise some and I'm assuming you could flip it around to direct even more of the noise backwards? If this does knock down the noise it might be a good selling point on these machines as well. Looks like a great product either way! If you want to send me one I'd be happy to decibel test it and post a review for you guys;)
@Coyote.five.02 жыл бұрын
i want to buy this particle separator for my x3 but my question is: i live in a hot weather during the summer and on winter is around 32f so i use a windshield but my IAT are alite high because of that, can i hook up this particle separator in a way that i get ram air from the side? and lower those IAT's? , right now it sucks air from the back of my head but there's not enough airflow even with the vents all the way open to help that air intake. if it helps my IAT's are on summer hitting 190f to 205f and on winter around 135f to 149f ( those are not engine temps i check engine temps with the oem dashboard ) i check IAT's with a dynojet
@KWTFilters2 жыл бұрын
Hi Sir, We do not use RAM air. Our system works by sucking the air in using the engines induction. We have MANY customers that mount their unit sideways, or backwards facing away from the windshield for this very reason. Thankfully our unit has many mounting options. So having a windshield is perfectly fine without. There is zero horsepower loss as well, and the dyno numbers have proven this. If you have anymore questions, please feel free to email at info@kwtfilters. We don't want any questions lost in the KZbin comments. Thank you for the interest!
@RedskinzFan2 жыл бұрын
your box intake is at the top though not the bottom correct?
@jameskerns35302 жыл бұрын
How do i install that if I have a rear windshield?
@KWTFilters2 жыл бұрын
We have several different options - 1 being our "Universal" mount that we have on our website. There are photos that show the process as well.
@DesertProXpRider2 жыл бұрын
What happens if you have the rear speaker?
@KWTFilters2 жыл бұрын
There are several mounting options, to help suit the needs of your vehicle. The options are on our website
@nikkispanish37522 жыл бұрын
Can different clamps be ordered to work with aftermarket cages?
@KWTFilters2 жыл бұрын
Absolutely! On our website you'll see various options and sizes. Each vehicle page you'll see a drop down to choose the sizing you need.
@itskerbc3 жыл бұрын
I wonder how this perform compare to the S&B particle separator?
@KWTFilters3 жыл бұрын
Overall results are comparable - but ours is completely different technology. Ours doesn't require electricity, or fans like our competitor.
@mntreehousemaster3573 жыл бұрын
They suck i lost power and its loud when you give it gas sucks alot of air makes machine bogie
@billyray69133 жыл бұрын
Can I buy a cfmoto from you? I can't find one anywhere! Dang lots of knowledge. Lol. Great video.
@cboutdoorfun99553 жыл бұрын
Can the be installed with a rear window?
@KWTFilters3 жыл бұрын
yes sir they sure can!
@karentailford17383 жыл бұрын
Pp
@doc5593 жыл бұрын
🏆🏆🏆👍🇺🇲🙏 Thank you for sharing.
@MrJeepguy19743 жыл бұрын
What’s the price and point of this filter?
@KWTFilters3 жыл бұрын
$399.99
@MrJeepguy19743 жыл бұрын
Is your roll cage powder coated?
@michaelmessin53073 жыл бұрын
I have a cfmoto zforce 950 sport that has a rear window. Is there anyway to install and leave the widow intact?
@KWTFilters3 жыл бұрын
Hi Michael, apologies for not seeing this. YES absolutely you can leave your rear window intact with our unit. By mounting on your side cage. Please email [email protected] for more details (so your messages don't get lost in KZbin. Thank you.
@kentmoore21323 жыл бұрын
Wow 😳 😳😳😳
@vivaanignacio93633 жыл бұрын
@Ernesto Matthias Happy to help xD
@carlmorgan29033 жыл бұрын
Cool
@reymundocastro873 жыл бұрын
I would like to try your product out I got a pro XP 2020 And I would like to compare against the particle separator from S@B
@doc5593 жыл бұрын
🏆🏆🏆👍🙏🇨🇱 Thank you for sharing
@johncolosio67643 жыл бұрын
Are those seats comfortable?
@hluebner3 жыл бұрын
Thanks to the KWT crew for the professional installation of your particle separator on our X3 at KOH 2021. We look forward to selling your product at RMOR Mesquite NV. Thanks again Carmel. Greg
@kmsorger3 жыл бұрын
Does the KWT particle separator need power like the other brand on the market?
@doc5593 жыл бұрын
🏆🏆🏆👍🙏. Thank you for sharing
@kramdiggity3 жыл бұрын
I don't know if installing a pressure indicator is typical for utv off road racing but it's so smart! I want to do this on my own SxS so I don't have to remove my storage box mounted in the bed to check the air filter.
@KWTFilters3 жыл бұрын
awesome!
@nervepain79723 жыл бұрын
I was curious as to any restriction in the air flow. If the unit uses the induction of the engine, you are using the induction of the engine to pull air through the particle separator and stock filter. Seems like a lot of work from the engine.
@adonisroyal49993 жыл бұрын
You probably dont give a shit but does anyone know a tool to get back into an instagram account? I was stupid lost the password. I would appreciate any assistance you can offer me!
@howardronan13393 жыл бұрын
@Adonis Royal Instablaster :)
@adonisroyal49993 жыл бұрын
@Howard Ronan I really appreciate your reply. I got to the site through google and Im waiting for the hacking stuff now. I see it takes quite some time so I will reply here later with my results.
@adonisroyal49993 жыл бұрын
@Howard Ronan it worked and I actually got access to my account again. I'm so happy:D Thank you so much you saved my account !
@howardronan13393 жыл бұрын
@Adonis Royal No problem xD
@hondaworldut3 жыл бұрын
I'm curious to see what the air filter looked like as well! That's pretty amazing.
@Az-bseries3 жыл бұрын
Beautiful and can do an install..nice
@Az-bseries3 жыл бұрын
HONDA RULES..got the talon x4 and it rocks..nothing like a transmission
@jaredramsey95893 жыл бұрын
Does this work with Rzr's that have an aftermarket cage?
@KWTFilters3 жыл бұрын
Yes, at checkout you have the option to chose any size rollbar clamp that fits your custom cage
@brianheying44783 жыл бұрын
Can this be mounted up high. I carry a cooler in the back and have a spare tire carrier.
@jacobgray3746 Жыл бұрын
@@brianheying4478 yes for sure!
@geardoc3 жыл бұрын
No fan on these?
@KWTFilters3 жыл бұрын
That's right, no fan, no electrical required, no noise! The Honda Talon that just won the Baja 1000 used our particle separator. No filter change during the race!
@beyourself44503 жыл бұрын
Not a car tho hun
@MagicalJerky3 жыл бұрын
Where can I buy this?
@roncombs257013 жыл бұрын
Where can I order one? I don't see it on ur website?