mechanicRaul

Пікірлер

@BrotherMud 4 күн бұрын

So simple. I feel stupid now. Lol

@mechanicRaul 4 күн бұрын

Haha, Not stupid, just didnt know, and now you do!

@kiduxinho23 5 күн бұрын

Any other way of resetting

@kiduxinho23 5 күн бұрын

Reset failed at the end of process

@mechanicRaul 5 күн бұрын

a scan tool would be the other way.

@kiduxinho23 5 күн бұрын

What if fails reset?

@mechanicRaul 5 күн бұрын

Depends on what you mean. Where exactly did it fail? At the end? it just didnt change mileage? Ill try to help

@marcjones744 5 күн бұрын

The brake retracted but the menu said brake service unavailable...

@mechanicRaul 5 күн бұрын

@@marcjones744 I would run a code scan and see if the system has any codes. Any code or problem will stop this from working correctly.

@marcjones744 5 күн бұрын

@@mechanicRaul thank you. I appreciate it

@josevalenzuela5011 10 күн бұрын

Hello i bought my 2012 mazda 3 hatchback with 115k miles i drive 420 miles a week for work mainly highway and i wanted to ask how often am i supposed to do a tire rotation and oil change on my car im just so used to my old car giving me a oil life percentage like itll go from 100% to 0 thats when its due this doesnt due that it goes milage and set of days or numbers. It didnt come with the owners manuel and i googled it every different forum tells me change it every 5k miles or 7500 miles and now your over saying 3k miles im just lost and when i bought i checked maintenance section and it said remaining miles and days is : ----- left so idk

@mechanicRaul 10 күн бұрын

Well it all depends on your driving conditions. If I was you, I would change it every 5000 miles. But only because you drive a lot. On older cars, 3000 miles is better because the engines wear a lot sooner than newer engines. Thats why when you reset it the oil life, it allows you to change it to your specific needs. If you changed your driving habits to around 100 miles a week, then I would change it every 3000 miles because with time, oil gets dirty and contaminated. Even when your not driving it a lot, the engine gets moisture and contaminates the oil. I think 7500 is excessive on your car. Hope this helps!

@josevalenzuela5011 10 күн бұрын

@apprenticeraul8321 I also got new tires on it coopers endeavor all season highway terrain tires I assume 5k miles is best right

@mechanicRaul 10 күн бұрын

@@josevalenzuela5011 Yea, might aswell. Just everytime you get your oil changed, do the rotation too.

@alhavana9426 15 күн бұрын

Isnt the cooling fan also supposed to be on at the same time as the condensor fan? Cause for some people if cooling fan doesn't come on then the pcm disengages the compressor clutch so it will not engage the compressor clutch to save the car from overheating from the load put on the car from the compressor clutch

@mechanicRaul 15 күн бұрын

Yes it is suppose to be on, the reason it wasnt on is because when I switched the relays, the bad relay was on the radiator fan circuit. The reason it didnt shut down the compressor, I believe, is because the engine wasnt hot enough yet, or, the PCM isnt programmed to do that. It is an 2009 and every manufacturer does things differently.

@Renegar87 17 күн бұрын

Great video

@ochenhetree 17 күн бұрын

Worked good on my 2019 thank you

@kirks2803 18 күн бұрын

Thanks for the help.

@mechanicRaul 22 күн бұрын

When your in the normal display, using your buttons on the left side of your steering wheel, all you have to do is press the left button, and go down until you see settings.

@kookeyraj1106 26 күн бұрын

Show the buttons ur pressing redo

@mechanicRaul 22 күн бұрын

Damn, your right, I will do better!

@TruePatriot59 26 күн бұрын

What year pacificas use the 12/8 cable to be able to program the key fobs?

@mechanicRaul 26 күн бұрын

2017- Current

@TruePatriot59 26 күн бұрын

@apprenticeraul8321 Thanks! Bit confused because some do it from.the passenger side by the sliding door panel 2 pin connector 2011a cable?

@mechanicRaul 26 күн бұрын

@@TruePatriot59 Yeah not gonna lie, ive never programmed keys, but doing it this way is the "official" way to get into all their functions and to use AutoAuth. From what I read, for some people this way works for them depending on the scan tool also. And for others using the 2011a cable works for them, but you need a different software to make it work. I guess whatever works best for you, I hope I was of help! 👍

@TruePatriot59 26 күн бұрын

@@mechanicRaul No problem. Thanks.. will keep checking what works.

@hammertimez717 26 күн бұрын

Nice, thank you! Now how would you fill it? 😂 Not much room, maybe a water bottle crunched at an angle?

@mechanicRaul 26 күн бұрын

well when you check it you want the car to be level, so if u lift it, a lift would be best. or the front can be lifted by the subframe, and the rear by the differential. But good luck with that, it a long truck, but its totally doable.

@mechanicRaul Ай бұрын

Depending on the model year, the "Oil control System" and "Oil And Filter" options will appear together, or only one will show up. Either way, reseting them is all the same.

@mechanicRaul Ай бұрын

The oil level should be in the B area for the Transits. The letter A applies for other trucks with the same Transmission.

@mrmikesparks Ай бұрын

I thought Mercedes was ridiculous by not providing a dip stick for the transmission, so you had to buy it as an aftermarket part. But, come on FORD..... Really? You have to get up underneath the van with it running and work next to the hot exhaust pipe where you will almost certainly get burned. This is beyond ridiculous!

@user-fy4eo1sj4g Ай бұрын

Short simple and sweet. The way it should be.

@mechanicRaul Ай бұрын

Thank you for the comment thats exactly what I try to do!

@kellydahlsjo2042 Ай бұрын

What diagnostics tool are you using?

@mechanicRaul Ай бұрын

i was using a snap on modis edge and a autel maxisys. any bi-directional tool would be good enough though for this diag. its just what i had on hand. on two different days.

@gregsmith7830 Ай бұрын

I have watched a number of these videos including yours that don’t show how difficult it is to open these canisters.

@mechanicRaul Ай бұрын

Yea your right, personally I just like to show the steps it takes to not make it a super long video. But since its plastic and fuel, they can get a little tight. Usually a longer ratchet does the trick for me though. Hopefully my video helped somewhat, Good Luck!

@jmizzbeatsj-jigga7888 Ай бұрын

This is for to reset the brakes right or just for to services to change brake

@mechanicRaul Ай бұрын

to change the rear brakes.

@TOTALLYAWESOMECARPET Ай бұрын

Thank you

@jjvg2959 Ай бұрын

I couldn't watch this - the angles and the movement and being so close to things, I couldn't keep track where you were. Got dizzy

@mechanicRaul Ай бұрын

Sorry about that friend, best I could do while working. Good luck!

@markmorris9443 Ай бұрын

35 on the front and 30 or 38 for the rear, I couldn't understand the rear pressure

@mechanicRaul Ай бұрын

Sorry about that 😅 its 38psi

@Staatus_Quo Ай бұрын

Great info. My scan tool wasn't putting it into maintenance mode. You saved me a huge headache!

@mechanicRaul Ай бұрын

Glad I was of help!

@pan4433 Ай бұрын

Mi radio se quedaba en FORD FUSIÓN hizo lo del video y funcionó solo que ahora no se escucha,no se que podría ser Podrías ayudarme en eso

@mechanicRaul Ай бұрын

Lo que llo haria es chequiar los fusibles que serian el 28 que es 5A, y el fusible 14 que seria 10A. Osi esos fusibles estan buenos, chequea que la tierra esta bueno, que seria un cable negro y azul atras del radio. Osi todavia no encuentra un problema, puede ser el radio que se tendra que cambiar. Pero mejor chequiar con un mecanico porque lla seria un problema mas complicado. Lo siento pero es lo mas que puedo ayudar sin mirar el carro. Buena Suerte!

@DesertTourtouse 2 ай бұрын

Thx

@warrenranstrom4462 2 ай бұрын

Do I have to do this to remove the pads?

@mechanicRaul 2 ай бұрын

You have to do this to install the new pads in the rear

@quishavonsha 2 ай бұрын

Thank you this gives me hope but I just have to figure out how to open the fuse box

@mechanicRaul 2 ай бұрын

it should just pop off, Hope it works! Good luck!

@djpowell4928 2 ай бұрын

Thank you!

@54player54 2 ай бұрын

Hey mate Do I have to unplug the battery before? Thx

@mechanicRaul 2 ай бұрын

No you dont, I believe I even did it with the car on lol. But just leave the car off. No need to disconnect the battery.

@shitboxshenanigans5553 2 ай бұрын

Thank you my man saved me a hour on a job I'm doing thank youu 🙏

@mechanicRaul 2 ай бұрын

Glad I was of help!

@kato2182 2 ай бұрын

thanks so much i have in the shop and no fking dip stick ughhh 😢 you just saved me so much time telling me about the 7 quarts of oil

@mechanicRaul 2 ай бұрын

Glad I can help :)

@ssnarine 2 ай бұрын

So does it automatically alert you again after 5k miles?

@mechanicRaul 2 ай бұрын

Yes it does! Or you can set it up to remind you after every how many miles you want to put. But Usually 5k is a good number.

@ssnarine 2 ай бұрын

@@mechanicRaul thank you 🙏

@marcustrice3876 2 ай бұрын

I can’t get mines to reset ?

@michaelelliott1212 2 ай бұрын

You made it EZ PEEZY. Thank you!

@leadnofollow7832 2 ай бұрын

I hate this engine with every fiber of my being. 😒

@user-dz9jj8et8m 2 ай бұрын

thank you, very helpful

@seatime674 2 ай бұрын

Wow this is a rare circumstance. I have the '18 Pacifica so I'm assuming Identical to this., I'm replacing the oil cooler next month and while I'm down there going to do the spark plugs.. Dealer wants $40 a piece for Mopar so that's a big "NO" lol,, then doing research the OEM is a Champion Iridum 9417 does that sound right??. The Autolites must have been waaay off to throw codes and misfire like that, I was even entertaining Autolites im glad I saw this .👍👍

@mechanicRaul 2 ай бұрын

Thats is correct OEM is Champion lol. And idk maybe it was just my bad luck but I had 2 Autolites blow out and 1 cracking. They only lasted about month. Glad my experience helped ya out 🤣

@seatime674 2 ай бұрын

@@mechanicRaul Yeah I hear the Pacifica 3rd Generation '17 and up is a different electrical system and it needs iridium and a very specific plug or things cam malfunction so I'm doing all my homework now before I change them on my '18. Dealer wants $40 a piece for thier Mopar plug I hung up the phone laughing so hard birds flew away 😂

@sixstrings2 2 ай бұрын

As much work as it takes to have to remove the intake manifold, it's best to use quality spark plugs use OE Champions or even NGK's don't put Autolites just because they are cheap.... You want to have to remove a plastic intake manifold as few times as possible for problems that are easily preventable, because you are going to have to remove it again to replace the oil filter housing or at least the gaskets on that motor.......

@vladimirevseenko 2 ай бұрын

Thanks, man! You save a lot of money for people who try to do it themselves.

@mechanicRaul 2 ай бұрын

Thank you for the comment, thats all im trying to do. Help out were I can :)

@phelps88ap 2 ай бұрын

Thank you!

@consentidocomunwithcommons7698 3 ай бұрын

Thanks for the video 🙏🙏 man This a critic for the American engineer that complicates all This is a simple example how American cars complicate everything with NO reason “””is just to make money buying more stuff when with a simple OBD2 connection without bypass crap 💩. Shame “” Thanks for the video 🙏🙏

@christophertovar6821 3 ай бұрын

Thank you, this has been driving me nuts for days and you made it simple for even a dummy like me to understand lol

@mechanicRaul 3 ай бұрын

Np, thanks for the comment!

@j.w.726 3 ай бұрын

@larrylucas8324 3 ай бұрын

On that top filter, I took a two foot piece of 1/2" pvc, slide it over that short drain tube into a coffee can and turned the yellow drain cap. Worked great, no diesel drip problem.

@HoangTran-uy7uv 4 ай бұрын

So I just did front and rear brakes on a 2022 jeep wagoneer and now the check engine light, and light and traction control light is on. Why?

@mechanicRaul 4 ай бұрын

I would check the codes but it could be that one of the motors is disconnected.

@vargasvargas7225 4 ай бұрын

Mine just says brake service unavailable try again

@mechanicRaul 4 ай бұрын

Probably has a code in the computer, I would try to scan the computer and delete any codes. Or disconnect the batteries for more than 15 min so the codes erase.

@electroporsche911 4 ай бұрын

Thanks 💯

@user-ph8py7jc9u 4 ай бұрын

❤❤❤

@cliffjumper1984 4 ай бұрын

Not a bad angle at all. Thanks for the help. I can rip interiors apart like nothing, but didnt want to tear too much apart.

Ең жақсы KZbin

Пікірлер