I get the setting sun in my master. Do you thing the spray adhesive will withstand the direct sunlight that is will get?
@AhmadAwan-rn9vv8 күн бұрын
Semi glass paint is matt or shiny ?
@anamsurfer46729 күн бұрын
Do you need a j Chanel along house ?
@rvanbeau200911 күн бұрын
I was at lowes today and they have 2x4 porcelain flooring pieces for $38. I was trying to figure out how to get around the sharp edges for using it as a countertop. This video answered that question. Thanks for the excellent video.
@xXxMCmanxXx12 күн бұрын
RIP a legend, i still watch your videos remembering the good times
@virginiaalonso617215 күн бұрын
You can do ANYTHING, Renee! You are one amazing woman!
@jessicamizhquiri687016 күн бұрын
Any tips on turning a full size mattress to a king?
@jacobkeppler198426 күн бұрын
Nice hotel
@ReneeRomeo26 күн бұрын
@@jacobkeppler1984 I loved it!
@350Zquicksilver28 күн бұрын
511 Seal & Enhance... Have you ever used this on light to white carrara (honed) marble? Restoration Hardware recommends the (MORE) brand sealer, hard to find if you don't like Amazon. I almost used 511 Impregnator Sealer think it was the best, but the Home Depot 1 star reviews have people running from it, stating it ruined (stained yellow, streaks) their light colored marble counter tops and the 1 star for Seal & Enhance are just as bad!? I have had no issues with DuPont Granite & Marble Sealer (Teflon) on my RH vanity, which I last applied in 2019. This time around I'm trying Lundmark Marble Restore, as seen on HouseSmarts TV here on KZbin.
@ReneeRomeo27 күн бұрын
I wouldn't bother sealing honed marble. I don't think it will do anything for a surface that's intentionally finished to open all the pores in the marble. I would just do like the French do and let it create its own patina over time. Just my two cents... All the best, Renee
@lize1455Ай бұрын
You’re brilliant! Thank you!
@ReneeRomeo27 күн бұрын
TY!
@user-hd6ux2xg8xАй бұрын
Did great hun, and u look great too❤
@ReneeRomeo27 күн бұрын
TY
@lisakay3193Ай бұрын
This high priced iron leaks water all over your clothes. Apparently they went cheap on their sealant and it leaks water so badly that it can;t be used for steam because your clothes will be covered in water. Who wants to buy and store more than one iron? At their price, buy another brand that won't leak and will work for everything
@ReneeRomeo27 күн бұрын
I think you're not allowing the iron enough time to come up to steaming temperature. Otherwise, contact Rowenta directly and and let them know what's going on with yours. All the best, Renee
@DebraPelosiАй бұрын
Why didn’t you seal the grout after painting? Wouldn’t that extend the life of the painted grout?
@DebraPelosiАй бұрын
Hi Renee, I getting ready to paint my grout in my kitchen and love your video and how explicit your instructions are. I’ve watched several other videos both of which sealed the grout after painting. Why didn’t you seal yours?
@ReneeRomeo27 күн бұрын
Excellent question! Because it's floor paint, it already has a sealer built-in. It acts more like a coating than a product that soaks in to the grout. One stop shopping. I hope this helps! Renee
@brendabeeАй бұрын
Hi Renee, I just watched this, good video, so could you expand on how to remove the grout?😬 Our shower corners and odd spots have many places that have the mold that WILL NOT bleach out, we built our home in 1998! Interesting to learn the why it is molding I'd say 97% of the shower is still lovely white grout😊 The tool you mentioned...I cannot find🤔 Plus once it is out, how do you go about getting it into the corners without too much excess? Thanks! Appreciate your video😉 Brenda
@ReneeRomeo27 күн бұрын
Hi Brenda, Go to your local big box store and ask for the grout removal tool that they carry. It's a little wheel attached to a handle. Fortunately, you don't have to do your entire shower! The grout float tool has a very sharp corner or a rounded corner (depending upon the look you want. Look for a sharp corner grout float and you'll be in business. No excess buildup. Best wishes on finding these two great tools. Renee
@marioo6315Ай бұрын
Followed these directions, used black Dimond sealer. Didn't even shine, ruined my table. Permanently dull
@ReneeRomeo27 күн бұрын
I think you need to go back and start from the middle of the discs. You may not be spending enough time on the sanding process. It's fast but not lightening fast. Mine is beautiful and glossy. Renee
@rhodadavis6380Ай бұрын
Thanks for the video; i need to learn this for a job interview.❤
@ReneeRomeo27 күн бұрын
Best wishes!
@carolreynolds22502 ай бұрын
Lovely
@ReneeRomeoАй бұрын
I'm so happy you liked this video! Thank you, Renee
@mercedesbenzs600bash2 ай бұрын
Great information,much appreciated...
@ReneeRomeo2 ай бұрын
I'm doing another batch as we speak! It always works so well. Best wishes, Renee
@theloveyourfacegal27732 ай бұрын
Pretty 😊
@ReneeRomeo2 ай бұрын
Thank you! Renee
@glendarichels89712 ай бұрын
Where is the recipe?
@ReneeRomeo2 ай бұрын
You can check my website for more info (in general); www.reneeromeo.com Here is the pdf: reneeromeo.com/wp-content/uploads/2017/05/My-Best-Cut-Out-Sugar-Cookies-Recipe.pdf I always receive compliments on these! Happy baking, Renee
@user-kw3ou7jc1z2 ай бұрын
Beautiful job Renee Romeo!!!
@ReneeRomeo2 ай бұрын
They're so pretty! Thank you, Renee
@kcaldwell33712 ай бұрын
Wow! Thank you so much.
@ReneeRomeo2 ай бұрын
I love mine! All the best with your bed cover too, Renee
@Gumdrop882 ай бұрын
Awesome!
@ReneeRomeo2 ай бұрын
YES!! It turned out perfectly. All the best, Renee
@warrenlowe6762 ай бұрын
Lost me at flex seal lmao
@ReneeRomeo2 ай бұрын
Well, it was just an unnecessary precaution. Water never gets on the brick. I was thinking that if there were backsplash during storms, this would help the brick to not get deluged. It turns out, it wasn't needed. The patio is still dry as a bone. Too bad you didn't watch until the end. Renee
@tulipthorn2 ай бұрын
Thank you.
@ReneeRomeo2 ай бұрын
You're very welcome! Best wishes, Renee
@debrameise88623 ай бұрын
I’m working on a board mounted valance gif my kitchen. How do I get the sides to hang straight
@ReneeRomeo2 ай бұрын
Drapery weights work great (sewn to the inside of the sides) but if your fabric is heavy, you can make "legs" for the sides. The legs (using the same fabric-covered wood as the top and attached with screws to the top) come down the sides and end just short of the bottom sides. You can then hot glue the sides in place and they will never move. Also, look up Tenter hooks. They attach drapery panels to the wall so that light doesn't come in. You'll need to sew rings to the back side of the sides and hook them to the Tenter hooks. So, there are 3 ways to deal with your issue. Best wishes, Renee
@ladymayramorfin4133 ай бұрын
Wouldn't it be easier if you get the measurements and make your own compass and make a half of the circle. Thats how I got a perfect fit on my window. Thank you for showing us how to make this type of curtains.
@marcotoni2313 ай бұрын
I’m glad you’re dropping videos again. I really enjoy your videos. 👍
@ReneeRomeo2 ай бұрын
Thanks! I'll try to post on a more regular basis. All the best, Renee
@idareandevers40593 ай бұрын
Renee, you did a good job doing this footstool pincushion but for me😩but for you😍good job🙏
@ReneeRomeo3 ай бұрын
Thank you! It's easier than you think! Renee
@lilyt58553 ай бұрын
Yikes, wrinkly scarves!
@ReneeRomeo3 ай бұрын
It works best for knitted scarves.
@soniameltziniti3 ай бұрын
What's the model of the iron you used in this video. I would like to buy one. Thanks
@ReneeRomeo3 ай бұрын
This is a Rowenta Pro Master
@soniameltziniti3 ай бұрын
@ReneeRomeo thank you do much. Just a another question, does it easily remove grease from thick cotton fabric. Because I do ironing for a living and I need iron that can iron cotton and bed linen
@ReneeRomeo3 ай бұрын
@@soniameltziniti Absolutely but check their website and see if they have a stronger wattage version. If you don't need the lower settings, they may have one that just "full-on" all the time. Best wishes, Renee
@user-xr2lm6re1u3 ай бұрын
Not very helpful. Not a learning video
@ReneeRomeo3 ай бұрын
What was missing, that you needed to see?
@deanle6043 ай бұрын
Frame need to be built not the anker. Totally failed your old man didn’t train you enough or he is don’t know how safety. I hope no one will do the way as you did
@ReneeRomeo3 ай бұрын
My father did a great job teaching me. Do not criticize that man! This was a perfect install, my friend. Renee
@jessicaterry63864 ай бұрын
*promo sm*
@lashonyataylor94924 ай бұрын
This video was very helpful in upgrading my dispenser and how thank you for sharing
@ReneeRomeo4 ай бұрын
You're going to love it! Thanks for watching, Renee
@shonji574 ай бұрын
This is Not a Industrial Sewing Machine!! It’s a Domestic machine on Steroids!
@brooklynleads93334 ай бұрын
You look so gorgeous! Your hair is beautiful
@ReneeRomeo4 ай бұрын
You're so very sweet. Thank you, Renee
@DanielaSanchezJasmin4 ай бұрын
Excellent video ! I am presently reupholstering an ottoman. Thank you for sharing!! 😊
@ReneeRomeo4 ай бұрын
Thank you for watching! It'll turn out great. All the best, Renee
@louhojong4 ай бұрын
Very helpful thank you so much from bangladesh
@ReneeRomeo4 ай бұрын
Thank you for watching! All the best with your sewing project, Renee
@jimbujold55864 ай бұрын
Hey, love diy on the inexpensive! Do you have a follow up ‘rain’ video, any leaks, is it still holding up? Thanks!
@ReneeRomeo4 ай бұрын
I don't have a follow up but the "roof" is just fine after these few years. I don't have any trees near it so there's no chance of debris getting in and causing a dam. That's my number one question. It's such a nice, dry space - we're out there all the time. Success! Thanks for asking, Renee
@dad1432Ай бұрын
@ReneeRomeo I have the same concern about debris buildup. I wonder if placing screen material between the decking and joists would help.
@ReneeRomeo27 күн бұрын
@@dad1432 Absolutely a GREAT idea!!
@derrickvanderhorst4 ай бұрын
Hello Renee. Just wondering if you could make a bed sheet change tutorial sometime. The one that you did for me was a way to fast and I could not keep up. Maybe you could make it slower for me.
@kimg31705 ай бұрын
Why cut up a huge piece of plyboard when you could just use a 1" x 4" board (one short cut with a saw)
@ReneeRomeo5 ай бұрын
That's an excellent question!! Plywood doesn't warp like a 1 x 4 could. It will remain as straight as the day you install it. 1 x 4's tend to twist and bend as they dry over time. That's why pros only use plywood. Thanks for bringing up this great point! All the best, Renee
@DoggyDoggie5 ай бұрын
Perfect like always 👍
@ReneeRomeo5 ай бұрын
OOOOh... thank you so much!! It was so fun to do. Thanks for always watching, Renee
@OnlyFashions5 ай бұрын
I thought that I'm alone who ironing videos for KZbin channel
@ReneeRomeo5 ай бұрын
I 😁 😁 😁
@talitasmit93375 ай бұрын
❤
@ReneeRomeo5 ай бұрын
Thank you! It was so fun to do! Renee
@user-ek1ji5oe6h5 ай бұрын
Thank you for that tutorial it was very informative and easy to follow.
@ReneeRomeo5 ай бұрын
I'm so happy that you enjoyed it. Thank you very much for reaching out! All the best, Renee
@MrJetplanemusic5 ай бұрын
Just noting here that "Heavy Duty" and "Industrial" are two different animals when it comes to Sailrite sewing machines.
@ReneeRomeo5 ай бұрын
I've had home sewing machines that were labeled "heavy duty" and were anything but...
@ananeves29275 ай бұрын
Hola, do you prefer steamforce or pro master iron?
@ReneeRomeo5 ай бұрын
I just bought a Steamforce and I love it. I feel like I can control the steam more perfectly because it's not automatic. I have to press a lever to generate the steam . It's much more precise for my sewing work and does a great job while ironing in general. I hope this helps! All the best, Renee
@peeshyholland4335 ай бұрын
Do you have any solutions for yellowing collars on wool sweaters?
@ReneeRomeo5 ай бұрын
I don't have enough experience with wool but my first impression is to use vinegar. Try researching that option. All the best, Renee