Another way to get a grip on the bolt is to use the jam nut method (2 nuts screwed onto the bolt so that one can be gripped and turned to get leverage and turn the part that’s in the wood. A friend told me about this%
@John_D2Ай бұрын
awesome thank you !
@PhilMace3 ай бұрын
Can I suggest a hack? I have an Ikea bed where the treads went on. I used the threadbare top of the bolt to bring the bolt out 6mm and then put it back in the bed. It worked like a dream until I could find the proper hanger bolt for Ikea use. I would never have thought of doing that without this video. Thank you.
@montrealmark19944 ай бұрын
Very helpful, thanks!
@atte3045 ай бұрын
ridiculously long complicated way to do this
@Richard-kz2om6 ай бұрын
Thanks! I looked everywhere for someone to show how to do this!!
@benreece13658 ай бұрын
I like you’re style! 👊🏻
@lopsided8904 Жыл бұрын
Hello, I want to use single piping and ply grip along the inside back carved frame of a fluted antique tub chair. Will that work, or can you only use it on outside backs and sides?
@bigviper64 Жыл бұрын
I just learned that its best to use 2 Hex Nuts, screw them on to just past the top of the bolt. Tighten them, and then use the inside nut to remove the Hanger Bold by turning counter clockwise. To put the bolt into the wood, use the outer most nut and screw it in normally.
@hecticserrano Жыл бұрын
Great video, excellent instructions!
@For_What Жыл бұрын
Damn i wanted to see you strip it
@Manicmood89 Жыл бұрын
Why burlap? Can anything else be substituted? (i.e muslim?)
@joannabrotherson1024 Жыл бұрын
Thank so much for these videos!!! Love how you show step by step how to do this. This was perfect!
@thines3560 Жыл бұрын
Thank you for this step by step tutorial series. It has helped me complete my first DIY upholstery chair project. 💫💫💫💫💫
@helenwood3199 Жыл бұрын
Replace the button in level line with the other buttons.
@gathakapse9568 Жыл бұрын
Can i get such jooks
@gathakapse9568 Жыл бұрын
Hooks
@andrewarthurmatthews6685 Жыл бұрын
Camera too far to actually see what you are doing so not good watching!
@blumenaue7590 Жыл бұрын
OMG Thanks a million.
@dipikadoshi8086 Жыл бұрын
what is legs doesn't go fully in at the bottom of wood cabinet? Is it ok?
@tinabenavidez1903 Жыл бұрын
Thank you for your help.
@VitalityMassage Жыл бұрын
That was epic.
@marcomedrano3768 Жыл бұрын
THANK YOU!
@alanjohnson8077 Жыл бұрын
We call that Clamp a G Clamp in the UK
@b516uck Жыл бұрын
Super helpful!
@sparkyheberling6115 Жыл бұрын
How can remove the safety switch? Can the process be reversed if I decide to resell the stapler?
@charliehilliard3071 Жыл бұрын
I never knew they were called that. Mine is bent and we didn’t have a clue how to fix it. We had no idea that we only needed a vice grips and wind it out. THANK YOU
@charliehilliard3071 Жыл бұрын
AWESOME VIDEO. NEEDED THAT INFO BADLY. thank you
@latashasingleton4789 Жыл бұрын
Thanks a lott!! Doing an at home wing back and ordered a 3plus model from Amazon. What is the model of this gun?
@matrix26uk2 жыл бұрын
I just spent 2 hours pulling one manually to fit. Only sliced my hand once
@helenamchugh93082 жыл бұрын
Thanks for all the videos, just would've liked them filmed closer .
@sirrichardrichard56552 жыл бұрын
You know the value of a short video...watch your fingers though..
@marywallace41242 жыл бұрын
Stupid
@mollynakamori2 жыл бұрын
Thank you so very much - 8 years later and this video continues to help!
@tyronewoodard58002 жыл бұрын
Do you know if you have a project and you just need to put a few staples in to something that came loose don’t go by no pneumatic staple gun then you gotta have a compressor just get a electric staple gun put a few staples in it and be done with it
@tyronewoodard58002 жыл бұрын
Don’t you believe him the battery powered will work just as good try the Ryobi
@rosecocchiarella20092 жыл бұрын
Thank you so much!
@kayefoster69772 жыл бұрын
J iv
@gordon54352 жыл бұрын
Love the way you talk us through in everyday language. It's like you're talking to me personally. Like I'm right there. Thnx...
@johnwagner8462 жыл бұрын
Is there any gun you know of to put in decorative caps?
@purenation68312 жыл бұрын
*...As a long time designer and public space specifier, the affordability **MyseIf.Furniture** and look is exceptional... spray them with fabric protector immediately for a somewhat longer use, you will not regret. smile*
@christinaowens7962 жыл бұрын
*...As a long time designer and public space specifier, the affordability **MyseIf.Furniture** and look is exceptional... spray them with fabric protector immediately for a somewhat longer use, you will not regret. smile*
@steveplenzler37722 жыл бұрын
Love this but question: 7/8 staples for the whole project or for only temporary tacking?
@marionsgray2 жыл бұрын
Thanks for sharing
@georgetech3802 жыл бұрын
Can you tell me what size Staples to use with a air staple gun on a new motorbike seat cover Thanks
@discgolflife2 жыл бұрын
Can you add xtra cross wire for more support?
@RicardoGarcia-kv8it2 жыл бұрын
Thanks awesome I am 59 furniture refinisher can I learn this also?
@jfrench7072 жыл бұрын
I was so stuck on my chair. Thank you! My first time really upholstering a chair the correct way.
@pamholmes11742 жыл бұрын
A really good video, short and to the point,Thanks!
@robinkline92532 жыл бұрын
Thank you SO MUCH! I just purchased 8 legs which appeared to have short hanger bolts. All that was necessary was your unscrewing procedure and they now reach the metal hardware on the other side of the wood plank :)