Solved my same issue in 3 minutes. I bought a Streetwize OBDII Fault Code Reader from Eurocarparts and I followed your instructions. Thank you very much.
@conker116_Ай бұрын
Yeah remember to grease the cone, turn the boot inside out and put it on the cone. For those you couldn't make out what was being said
@andyprodive242 ай бұрын
For the rattle noise possibly the clutch pully needs changing.. Had to change it on a couple of cars they do go faulty and rattle like hell, making an horrendous noise 😊
@cygnux14 ай бұрын
Thanks very much
@daviemac10005 ай бұрын
would be great if you could tell me how to get the pedal off . can only locate one bolt
@bigguy5895 ай бұрын
Thanx man!
@KiwiTony7 ай бұрын
What year is a '54 plate' for those that don't live in England?
@ivanbodurov126822 күн бұрын
Year 2004, mate..
@eoghanhennessy4437 ай бұрын
Thank you my injector is causing a fault in the hand brake ecu strange
@xSherru9 ай бұрын
Lifesaver!
@kevinprivet59429 ай бұрын
Bloody useless video, a total waste of time he's more interested in blowing up his own sphincter about his shop. rather than paying for his advert, charlatan.
@andyprodive2411 ай бұрын
Exhaust gas circulation flow P0400
@fadi7224 ай бұрын
I have faced the same problem, how you resolved ?
@The_Touring_Jedi3 ай бұрын
Petrol engines, Purge Valve or tank cap can cause this. What't good about Toyota is you can still drive it with lights on but other modern cars just go in Limp mode. Toyota is the best if you can do some repair alone.😂
@andrewjefferies839111 ай бұрын
Its a Lambda sensor !
@drugbedevictorahiaba2604 Жыл бұрын
Thank you so much!❤
@stevewood8891 Жыл бұрын
WD40 Will do it very quickly...
@mkr10001 Жыл бұрын
Dont illegally tint your windows then 😂😂
@parallax.propeller Жыл бұрын
That's neat. On the control knob of these are 4 speeds ( switches), the first 3 go thru three different resistors to set the speed, the forth switch goes more directly to the blower motor. My forth switch works but the forth speed does not. Does that fourth one go via a relay and if so do you know which one?
@lordloverocket2403 Жыл бұрын
But they come from the production line fitted that way. . . Maybe your wrong ?
@TORDesign Жыл бұрын
This guy has theory that dead battery is effect of blown fuse! kzbin.info/www/bejne/qKvLcnSYmq6deKc But I can’t find the elusive fuse in mine.
@faroukkhan6777 Жыл бұрын
Thanks excellent advice 👌
@kevinkennedy5239 Жыл бұрын
Thanks andy
@andyprodive24 Жыл бұрын
Have found fault it was the lume connection, on a multi plug cleaned had no problem since.
@derekrooney717 Жыл бұрын
Just changed it!! - 4 all week ,good man Andy👊 from Eire
@mrt4409 Жыл бұрын
What happens when it's the wrong way round?
@adrianpacione4906 Жыл бұрын
Clutch fr
@ciscokid9119 Жыл бұрын
Awesome.. Great Share Thank you for Helping 🙋
@samipistool1715 Жыл бұрын
I cant see shit..
@enilon1232 жыл бұрын
Thank you! I will look into this and try it on my car
@andyprodive242 жыл бұрын
It's worked on my car. But you have to move the car so it is pick up by the sensor
@oxo0102 жыл бұрын
"I'll shine a light on it ..." and on some other things as well, a screwdriver that the autogenerated subtitles calls a "positive drive", that's from the front but I won't say where the front is ... After a lot of back-and-forth within the video, and replaying, I figure out what it all means; but it would have been simpler for all of us if the author had just made things clear in the first place.
@solutionclinic44752 жыл бұрын
If you would point at the parts you’re trying to explain, someone could actually figure out witch one you mean 😉
@hifivegav2 жыл бұрын
Hiya mate I'm in Burntwood..got a intermediate problem with my starter..starts first turn in morning but after used car ..trouble starting...2003 Corolla D4D ..would it need changing mate?..and can it all be done from bonet..cheers mate
@calholli2 жыл бұрын
Why make a video if you don't even have a flashlight?
@TheLeew1272 жыл бұрын
Are you sure you are right with your horizontal and vertical? I adjusted my top one to drop my beam down a bit?
@leearnall63932 жыл бұрын
Many thanks saved me a fortune and thanks for the tips on how to avoid dropping the bulb down the back!
@petercheeseman43992 жыл бұрын
Thanks Andy … did mine too
@danielsmith35482 жыл бұрын
Thank you so much mate
@JamesSmith-np1hs2 жыл бұрын
Thank you for the help. I have a small leak on the bottom of the unit, at one of the seams. Do you think I could seal it with PFT tape?
@g.moeller3082 жыл бұрын
So how did you fix the leak?
@andyprodive242 жыл бұрын
Take photos of electrical connections. Unscrew the cap with a big. Big pair of grips. A big pair. The oil must not be filled to top. Expansion... Put heavy duty ptf tape on thread and screw back together. Don't rush it prepare...
@andyprodive242 жыл бұрын
And it's still working no leaks
@g.moeller3082 жыл бұрын
@@andyprodive24 how did you fix it? At the very end you briefly mention tape. Is that what you used? Where did you put it? Could you maybe show what you actually did to fix the leak?
@andyprodive242 жыл бұрын
@@g.moeller308 just heavy duty ptf tape make sure you put it on the right way, that it does not crumple up. Right hand tight put on left hand.
@johncorona4337 Жыл бұрын
@@andyprodive24 I googled heavy duty PTFE tape and no one mentions "heavy duty", just different colors for different applications.
@majjonice2 жыл бұрын
Greatly appreciated 🙏 😌
@aidanholden36192 жыл бұрын
Both of those adjusters on my 08 Mazda 6 adjust the height only. Xenon
@Mr89netrom2 жыл бұрын
I guess one does the high beam (lamp itself) and the second one does low beam? I replaced my left lamp and it about 15cm higher 5m away. So i need to get that fixed.
@radosbezpriezviska24143 жыл бұрын
THX
@scorpionscorpion18983 жыл бұрын
my radiator makes noise when it starts to heat is from gorenje company what can i do
@andyprodive242 жыл бұрын
This could be just the heating process. But ring manifacturing company. To verify.
@disturbedcarrot3 жыл бұрын
Very useful
@picek66663 жыл бұрын
Thanks
@GlennBroadway3 жыл бұрын
Thanks, your video helped me get inside my model (Bosch Tassimo 450) and fix a similar problem. Here’s a video of my fix: kzbin.info/www/bejne/jXXKg5hoqq-Sfrc
@Nexus6ix3 жыл бұрын
Thank You, worked on TAS 1402 too!
@dougaltolan30173 жыл бұрын
You "hope that helps", the little nugget "7mm hose" has just saved me a shed load of time, cheers.