but can u do gun parts

So you never had seen a voron switchwire

i like mine, but im having issues getting the speed up without causing rounded edges to not adhere. like its really slow. My first was an Anycubic Kobra 2 Neo and it runs circles around this thing, but isnt as good with overhangs and is much smaller. I could use some advice

How does this one fare against the Bambu lab a1 standard / mini. It looks like ender might be relevant for me as i want to want to spend to much time tinkering with the 3d printer.

Hey, just wanted to say thanks for the amazing video! I've got an SLA printer here, going to give this project a go to create a 'Merry Christmas' stamp for my cards this year.

Tlaciaren tipu sklo bez bubliniek a kazov ma pevnost 10 nasobok ocele potom na formu zo skla nanesieme silikon potom vitvorime plastovu formu ktora je odelena asi 1cm od dielu a nakoniec nalejeme skrobovu zmes a ukoncime utesnenim.Takto vznikne material ktori odolava absolutne viacerim tlakom narazom vhodne na konstrukcie stien domov proti tornadam vode .

Core-XZ... that's a first for me...

I'm sure that this is a great scanner if you are printing with a resin printer but what about an fdm printer? Do scanned prints print well that way? Can i scan my head and FDM print it?

Nice video, it just need more sanding try doing from 280 to 2000 trust me result will be astonishing. It will remove all lines from previos sand papering until it starts shining by itself and then you can use the white cream we apply to make things shine again.

Will this work for tattoos on skin?

Also go to Marco Reps for a PROPER, deep review. Tip: don’t say “game-changer”, it’s EXTREMELY over-used for almost everything, and when people hear it they tend to eye roll 🙄

Putting them in bags, in a bin. Genius!

I appreciate the efficient way you provide valuable information related to this two trees engraver..thank you!

How did you get the black parts to show up? Anything I scan that has a black piece, will be ignored, shiny or matte, doesn't matter.

How do you tighten the y belt

Great tests man!

Need higher grit sand paper. Could also spray on resin and then cure it so you dont have to polish.

Would you mind sharing settings like your cross hatch/ angle etc? Im trying a bunch of diff settings.. I can get a bunch of blues, but not the greens or reds. your color chart here is perfect. would love to know your overall settings please.. thank you

Hello, thank you for the review.. I would have liked to hear about how well the filament pulls out of it.. the holes for it seems like they are at the wrong angle and I have heard other say it binds.. you didnt really show how easily/or not the filament pulls out or whether or not the angle is off in the video.. any thoughts on all of that is appreciated.. I wanted to stick some of these behind my bambu ams lite units to feed matte pla into them and there cant be too much binding.. thank you..

Do you think it would be possible to engrave a logo on a beverage can?

Do you think it would be possible to engrave a logo on a beverage can?

I couldn't find the link where the power and speed list is, can you share it with me? 4:35

Do you have to set this up as raycus or can you do jpt with q pulse? or is this not a q switch laser at all?

Can you add own drying profiles with custom names such as petg-cf instead of genericc petg?

Have this printer. Best value around. Some prints look injection molded. Most all KZbin videos agree with HE. Check them out.

Certainly seems odd that vacuum packed filament bags aren't fully dry. That definitely puts a kink in methods needed to help keep filament dry. So is +-25% the goal for dry filament? I would have expected lower value. I have a Sovol SH02 filament dryer which has an onboard humidity meter. Really not sure about it's accuracy however. I have some older PLA (3+ years old) that I know is wet and I'm trying to dry it out in the SH02. I'm starting the drying at 50C for 16 hrs and trying to watch humidity to see when it gets around 25%. It started in the low 30s and has climbed to near 40% after 6 hours. Guessing this is expected since the PLA should be releasing moisture as it continues to dry. But I'm wondering how long this may actually take to get the humidity down to 25%. Would be interested in what you think? Also is it possible to over dry filament? Any downsides to keeping filament in heated dry boxes for longer? Thanks.

Awsome video! Dose laser engravers produce fumes? Can i use it in an apartment? Im looking to engrave stainless steal is it hard to make a multicolor engraving?

Please can you help me, I have a few questions. Can I import my own images from my own artwork on my laptop to be engraved? Is the software hard to learn? Where is the best place to buy thin wood like the wood you used for your tree in the video. Thank you so much! Thumbs up!

Which 3d scanner do you think is better? moose 3d or mole 3d? I'm looking for something to scan car parts and mounts

Wow. You keep deleting my comments. Really hit a nerve. lol Guess I'll just start reporting stuff to the FTC

Priced surprisingly well, it's a pity that the top cover does not adhere perfectly and filtration against VOC for me is a priority as the printer is 1/2 meter from me, no less for PLA/PETG seems a great printer for this price.

Ender 7? Naw

Thank you for this detailed review! Is there a specific 3d scanner that you would recommend for scanning faces / hair / heads?

THANKS

Ouch - that firmware upgrade procedure was horrendous

Would this fine enough and powerful enough to engrave watch dials?

hey bro, is there any way we could text or email? i have some full color designs i want engraved onto my macbook, but i need some advice on how to get it done, or just find out if its even possible.

The factory enclosure and exhaust are under valued items, and are a nice addition. They are lower costs items that are generally accessories, that you need when you really start cutting things that smoke easily or smell... The lack of honeycomb insert is crazy. Every machine at this price point should have some sort of insert/tray/workspace. Just my 2 cents...

I think I need to change the laser head but Atezr is very difficult to reach Can you help

I have the same laser But now after 6 months use the laser stop working can you help.

This video is so informative, I feel like I could engrave my grocery list now!

Hey bro, i have a macbook i want to engrave on and the designs i have are colored, do you know a good fiber laser that engraves in color?

When are we going to start getting organic US designed and manufactured hardware? Maybe Hoffman Engineering can coalesce all the best features of his favorite lasers and manufacture one!

Keychain lasers are class one!?

I am going to pass on this one. It's very concerning me the surface gets that hot and this unit is 20db louder than other units. I will buy the polymaker polydryer instead.

I have both Revopoint Range scanners for large items and a Cr Ferret for large to medium. I’m looking for a medium to small scanner. The Im looking at the Pop,series which has capabilities to scan objects as small as 20 MM. I saw the specs on this Mole, which say it can small things as small as 15 MM.

What did you use for exhaust? Do you have link

put a meter in it too, you probably need way more gel than that, but i do see only few are opened in that box.

Thank you so much for putting this on my radar! I've been in the market for a 2-spool dryer for some time, and now that this is on halloween sale ($59) it felt like the right product ant time for me! <3

i cant run it, it just shows me a .msi where is the installer .exe?