Strange - flying - imposter sun action.... Viva Chhay!
@FishingWaus4 ай бұрын
I didn't even have to add music to the video, they were playing that music during the eclipse at the center parque
@007kingston4 ай бұрын
This is a fantastic video, explanation and suggestions on the BC cast. Your camera work, and narration are to the point and clearly illustrated. I have been trying to figure out casting for a while without clear instructions. I really appreciate this video. Thank you.
@kjellpettersson19375 ай бұрын
Do you or anyone has a link to the reel om Amazon? Kjelle, Sweden
@johndoppleguard6 ай бұрын
Nice fish brother!
@jasonkline60046 ай бұрын
Have you noticed any play between the spool and housing once upgraded. I did the same exact upgrade as you but my reel has now developed a very small gap if you will once assembled with a tight cap. This allows line to get behind the spool and can be very frustrating.
@Manuel_Z_Kayaks7 ай бұрын
You destroyed a $3k-$5k kayak to make a cheap plastic seat fit. THAT IS NOT THE ONLY SEAT AVAILABLE! 😢 So sad!
@Manuel_Z_Kayaks7 ай бұрын
Sorry but you destroyed that kayak. Why didn't you just modify the seat to fit the kayak? $3k-$5k kayak vs Cheap plastic seat... DID ANYONE READ THE DESCRIPTION? "EDUCATION PURPOSE" YES: THIS IS WHAT NOT TO DO! OH-MY-GOD! 😢 SO SAD! Note: This video should be removed but he's got so many views that will never happen!
@ChrisG99787 ай бұрын
The 2nd gen cheap-o "Aventik" centerpin reels use fairly decent stock bearings now. I replaced the stock bearings in a 2nd gen Aventik centerpin with 7x14x5mm ceramic boca ABEC7 bearings. Did not notice much of a difference. I always add a small amount of synthetic reel grease to the pin which seems to help the spool spin more freely.
@JJ-gm4ck7 ай бұрын
i get 5 mins on my stock luhr jensen float reel, the blue one. I think you boys overpaying for islander esp if you have to upgrade the bearings. And honestly; having to use loctite to keep bearing in place? shame on you islander. that's like using chewing gum - surely you have better engineer skills.
@chesterrizon38519 ай бұрын
Your turn buddy! Show the moves
@FishingWaus8 ай бұрын
Think I need more than 5 lessons to do that.
@OneTrueProdigy_9 ай бұрын
What was the test for non boca bearings? Do prefer with boca or stock?
@FishingWaus8 ай бұрын
non boca was about 2 minutes. Prefer the Boca. Make sure you heat up the bearing to melt the lock-tight before you take it out.
@carmena.c514510 ай бұрын
Aquí en Lima Perú también se está viendo el eclipse 😊
@havnt378211 ай бұрын
Winner eats the guinea pig!?
@FishingWaus11 ай бұрын
dinner with ramon
@brianseattlerealestate282011 ай бұрын
What kind of spinner were you using?
@FishingWaus10 ай бұрын
egg fly
@henryhey652111 ай бұрын
Sorry retard lamiglass is actually made in the US especially their blanks the guides they use for the rods are not but the blanks are made in Washington and this is coming to a person who buys their blanks and build his own poles so yeah and I'm a Long Island boy so we know a thing or two about lamiglass because that's all we surf fisherman's use 😂
@jaaron28347 ай бұрын
That’s exactly right…! Lamiglas has been around for a long time…I remember as a kid,… Lamiglas was the shit …! Everyone wanted one … one thing is for sure ,.. they sold many many blanks to surf fishermen that built their own rods … before graphite and carbon ,.. they were fiberglass & they were yellow… 👍😎🤙
@jaaron28347 ай бұрын
I have the 11’ Insane Surf conventional 50/50 split.. a bit on the noodle side but still a nice action rod… can’t beat Lamiglas for the money…! 🤙😎👍
@kevinwest4488 Жыл бұрын
pinch the barb? why?
@gigachad9225 Жыл бұрын
Then d
@aaroncho1918 Жыл бұрын
vetrans park is a good spot for pinks its were he at
@LiborJess Жыл бұрын
Dude, only humans can do this, cattle, and fish after stones and mud. As a fishing guard, I will take your fishing license for 2 years!
@LiborJess Жыл бұрын
Hey fishermen, do you have respect for fish? Why are you dragging her over the rocks ... climb up for the scoop! You can't do that, he's a creature like you, people don't drag you across the asphalt when they meet you on the street either. Respect the living, that's the only way we'll survive.
@Piratepeteoo Жыл бұрын
Hi mate nice job can I ask you how do you Aline the propeller to pull out the casete for the trolling motor 🤔👌
@FishingWaus Жыл бұрын
I take a wire clothes hanger, and straighten it but keep the hook and cut it to size. Then I use wire shrink wrap to cover the metal part of the hook, which I use the adjust the prop. To use it, I pop the motor out of the Hobie latch giving enough room for the clothes hanger to go down the side. Then I use the clothes hanger to align by angling it back then bringing it forward to the prop and pulling it up. The last picture on this page has an image of the modified clothes hanger fishingwa.us/hobie-kayak-trolling-motor/
@Piratepeteoo Жыл бұрын
thank you very much much for your information mate
@mikeham5465 Жыл бұрын
wow
@jamiepegelo6837 Жыл бұрын
Where did you get the ceramic bearings from? I have the same cheap real and have been wanting to do a build with it (I.e) upgrade bearing, handles and I’m having the back engraved.
@FishingWaus Жыл бұрын
bocabearing is a good choice. Also on ebay. Just measure the size of the bearing in mm.
@tinpham514 Жыл бұрын
Any specific techniques? Also what is your setup, looking forward to trying this for 2023
@aaroncho1918 Жыл бұрын
for me i would use a 1/2 oz to a 3/4 ox cannon ball with a 72 inch leadeder with a medium size corci and a small bead to keep it mid water colom
@FishingWaus Жыл бұрын
if you r fly fishing, use a streamer and when it gets 45 degree downstream of you stripe fast, really fast! The water is pretty murky, so they can't see the fly but the might able to sense the movement of the fly when you strip.
@ettoredicarlo1679 Жыл бұрын
Wel now you catch bigger fish with it........ right?
@jamieevans871 Жыл бұрын
maybe lol ... and dose it have drag etc tell us more
@cowmancheese Жыл бұрын
Can you explain how you got your battery and motor attached?
@FishingWaus Жыл бұрын
go here fishingwa.us/hobie-kayak-trolling-motor/ the battery connects to an EC5 to SAE connector. Then the SAE connects to the motor or fishfinder.
@cowmancheese Жыл бұрын
@@FishingWaus Thanks very much!
@tall14dude2 жыл бұрын
I tried all season last year to catch one on the fly, but never did. Hopefully, this season will be different.
@FishingWaus2 жыл бұрын
LOL. It runs every other year.
@spoonmansacamano57682 жыл бұрын
Finally got my watersnake TM, and it was a game changer! I thought I would only use it to get to and from my fishing spots to same some energy but I was actually able to use it while fishing very efficiently, caught 4 of my 5 redfish limit while using the TM. Very good video by the way
@HungryH19512 жыл бұрын
My old stomping grounds. I've caught many a nice walleye there. Used to catch a lot off the bridge on crankbaits in the evening before the city decided to put up a high fence on the south side so you couldn't cast out. This was caused due to weekend car cruising kids throwing eggs at the fishermen and the ensuing angry fishermen complaining to the police and city hall. The city decided the answer to the problem was to put up a fence so that it was not fishable from on the S. side of the bridge (best side for crankbaits). This was approx. 1988 and the city never took the fence down. It still stands to this day. But if you walk down under the bridge you can still take some walleyes but it is not near as pleasant or productive as casting from the bridge.
@tldrafaik6144 Жыл бұрын
Is the south side of the bridge more productive? I saw a guy fishing from the north side on the bridge, he snagged one by the belly and dragged it to shore.
@HungryH1951 Жыл бұрын
@@tldrafaik6144 Before they put the high fence on the south side, which is the down current side, it was really good for nice sized walleyes in the evening hours. I caught a lot of 18 inchers there, mostly on crankbaits. Now with the fence you can't cast over it so you have to fish down on the shore which is not the best angle for crankbaits. I have seen quite a few taken on the N. side, mostly down on the shore dropping a spinner worm rig back under the bridge. I have seen this even in daylight. I saw one guy using a lindy jig on the N. side of bridge and he took a 20 incher there. I haven't fished it in years so not sure how the fishing is now. I imagine it can still be pretty good. This used to be my favorite place to fish Walleye off the S. side of the bridge until the city saw fit to put up a fence to keep the fishermen away. Seeing as fishermen spend lots of money in M. Lake I thought that was really weird and a slap in the face to fishermen. We don't need that fence at all.
@rpaulpen2 жыл бұрын
All the pro's out here and not one, expect for this video, touches on matching your weight to your rod. This is the most critical balance you need to cast a centerpin or a baitcaster at a good distance. Too light and you birds nest nor little distance. The harder you cast the more potential for birds nest. This is not obvious to beginners so kudos to you mentioning it! After your balance is right, then get your feathering technique down with your finger to prevent bird nests.
@eprohoda2 жыл бұрын
eally incredible view.see ya!!
@billhocker4762 жыл бұрын
You chimed in with loud music so that no one can hear you explain how you connected the seat! Less music, more verbal audio would have been so much better, but thanks for posting anyway. I’ll try to figure out how you did it on my own I guess.
@jagmechtech2 жыл бұрын
Do you have link to battery pack used?
@FishingWaus2 жыл бұрын
Yes. fishingwa.us/best-fish-finder-battery/
@jagmechtech2 жыл бұрын
@@FishingWaus what’s the brand and model? I click on link but it takes me to Amazon and I can’t find one for 82800mAh range.
@FishingWaus2 жыл бұрын
@@jagmechtech Can remember the brand and model, it was just a generic battery. Most car jumper starters battery will work. Try eBay. Search for a car battery jump starter battery and find the one with the highest mAh (the higher the better).
@xdgmail14582 жыл бұрын
more like: How to tow a small boat with a normal car
@iamalemontree2 жыл бұрын
Do ya know what’s the limit on shad? On Washington side?
@FishingWaus2 жыл бұрын
no limits on the WA side. You will need a WA fishing license.
@iamalemontree2 жыл бұрын
@@FishingWaus thanks much!! What’s your favorite lure to target these ?
@FishingWaus2 жыл бұрын
@@iamalemontree I like small 1/32oz shad darts, green and chartreuse or pink and white. But they get pricey. A red hook from Walmart with a green bead also works well. Go here and scroll down for the lures. fishingwa.us/shad-fish/.
@iamalemontree2 жыл бұрын
@@FishingWaus thanks so much!! 😀
@saltysailor1412 жыл бұрын
Video was pretty helpful? But the music was very distracting and took away from what you were sharing bro.
@slabslayers2 жыл бұрын
Awesome catch. What lures works best for you?
@FishingWaus2 жыл бұрын
depends on the day. jig with curly tail grub or a tube. here is a link to the lures fishingwa.us/bank-fishing-for-walleye-on-moses-lake/
@user-fr4nd4ct9i2 жыл бұрын
*Used this today for first time **enjoyable.fishing** recommend caught four bass with it, it seems to be a solid reel so far. Very smooth and cast like a dream. I think its a good value.*
@mikebrenneman28552 жыл бұрын
You are a great fisherman, but I have a request. You call it fishing in your title, but a least half of your video is walking on the rocks. Who wants to watch that?
@nvonaspern2 жыл бұрын
What's your tackle set up?
@freesteez32 жыл бұрын
That's not how you catch squid 😅
@FishingWaus2 жыл бұрын
Lol 🤣🤣🤣 right!
@69sopae2 жыл бұрын
hi, i got a car jumper battery similar to yours and after using it on my 28lb troll motor for ten minutes, the battery went dead. Whats wrong with it? Did i bought a fake car jumper battery?
@FishingWaus2 жыл бұрын
28lb trolling motor draws too much power. When i had the setup i was using a 18lb thurst motor. If you want to use the 28lb thurst motor you need to use a normal deep cycle battery or lithium battery.
@TheTwispAngler2 жыл бұрын
Were you there right during the first heavy rain? I'm pretty sure that's the only time I'd fish there. Because I want runs and jumps and smaller fish there. And I'd want them nice and bright with sea-lice still on there. : )
@69sopae2 жыл бұрын
How many lbs trolling motor is that ?
@FishingWaus2 жыл бұрын
It's 18lb. Most of the motors between 18-24lb will fit into the Hobie well. Many people use the watersnake 24lb
@69sopae2 жыл бұрын
@@FishingWaus i just bought a car jumper battery (Lazada) that says 89900amh ,however, it only lasted ten mins on my 28lb motor and battery went flat. i was drifting at sea and luckily had my fin drive. Could you advise what type of car jumper battery you are using? Greetings from SG btw
@FishingWaus2 жыл бұрын
@@69sopae It's ur motor. The motor i was using was only an 18lb thrust, At 28lb thrust, you need to get a lithium battery or a deep cycle battery.
@guyh.45532 жыл бұрын
Back in '99, I had an Escort. I towed a 16.5 ft Fiberform with a 75 hp motor. Was a bit bigger than what I should have been towing but it worked fine. Love your boat!
@Seattlekoi2 жыл бұрын
It is illegal to chinook on green river.
@Jojo-vc2wm2 жыл бұрын
Thank you for the nice clock video. I used it for a chemistry experiment video =)