I see online they sell a 7.2v version (looks like your one in this video) for $189. And then there’s a version saying 7.4v for $279. Do you know if the 7.2v will happily take a 7.4v 2s 5000mah battery? (If I swap plugs to fit)?

You seem very well-versed this stuff can you help me come up with a solution for an FPV ground station. I want to have two cameras one that watches one deer feeder and another that watches another feeder for hunting in the woods I want both cameras video footage to be viewed on a 7 inch monitor screen. I want to be able to toggle between both of the cameras. So that I can toggle between feeders. The feeders are only about 100 feet apart. Can you recommend some products and a good set up?

That Sounds Great Man 👍 Didn't know They had a right hand Hemi Down Under?Sweet,Hello from Boston Mate👋🤘

That was good :). Cannot believe no other comments!!!

Simple and understandable explanation.❤

there's two variant of the HSP 1/8, the buggy and the truck - HUGE difference mate... also, with your GoPro, and not needed LED's, you're adding too much weight on the rig!!!

Great video. I have this ESC and want to plug it in a Arrma infraction BLX 3S, 1/8. Stock motor is 3660-3900Kv. I know this ESC takes 4S, but will it run this Arrma?

I have a 1:10 scale laegendary thunder that won’t go in reverse. Can you do a video on how to fix it?

i have hobbywing ESC 60a. NO beep beep no throttle. green light flashing. what todo ?

Look at what they DONE to your paint? Are you illiterate?

These pads work, and are good value if they are looked after well. If not, or if they have been over-heated, they can go hard and crumbly.

With a very heavy heart

Why in the fuck would anyone give Cleetus anything let alone a top fuel dragster, that's retarded

I waited a year or more to see where ya went with this. Hoping to see what upgrades ya did and which ones were worth doing so I could mod mine a bit more.. this really was the ONLY reason to be watching your vids, that specific vehicle... after like a year of silence you update, good!...to say ya sold ya vehicle, wtf!! all point watching now gone then...then ya point ya cam at a new vehicle, a steaming overweight pile of shite... all motivation to watch your vids just gone in like 30 seconds... this sucks!

U beauty

Sounds bloody awesome bro, I'm going to do this to mine, keep it NA, do alot of driving up to the mines in the Bowen basin. I'll probably drop one muffler out for more noise haha got an AU ghia v8 300k on clock, oils still clear on dipstick when I drop oil at 10k

GOD BLESS THE MIGHTY FORD.👍❤️🇦🇺. So many seriously talented designers in all years of Australia Ford. But the shaker’s OMFG THE HOLLY GRAIL 100% . But sir that car is extremely well designed FORD👍 Huge respects to all involved in the build of another A+ FORD TO KEEP AN EYE OUT FOR ON THE QUARTER MILE TRACK. AWSOME.

Just bought a 2005 territory, was going to go 2.5 cat back, not now, so the 3 inch is standard on TD SZ yea?

Credit to the owner some serious horsepower sorry when idling sounds a bit like a rotary

Magnificent flying the Ford flag stunning condition too

What's his Instagram ID ?

I don’t get it correctly you talk too much

Hi guys, I had lot's of trouble getting throttle calibrated but I found out some things that might help you: In my case i tried so many things which din't help. In the end it seemed that I fried my transmitter due to accidentally changed the esc settings to higher voltage which my receiver couldn't handle. It looked okay though but I couldn't get my throttle calibration done.cBefore I had the standard setup but I swapped it to the EZRUN MAX 6 with the motor as a set, better known as the Hobbywing ESC and motor. Problem was with the EZRUN: I hold the SET button and switched it on, ESC goes in Throttle set mode, I press the SET button to calibrate but just one beep sounds and nothing happens after that. Problem with standard ESC: After I hold the ESC Set button and the ESC goes into calibration mode, the esc turns off when I pull throttle. I have to disconnect the battery and reconnect it to try again. The ESC won't turn on anymore after I tried. There are some things that I tried and did help a lot of other people as I red, like: - ENDPOINT RESET: It can help to reset your endpoints. kzbin.info/www/bejne/gX6TeoWAirlse9k - SWICH THROTTLE DIRECTION AND MOTOR: It sometimes can help to switch motor polarity cables, just switch two cables from your motor (doesn't matter which one) AND ALSO reverse the throttle settings on your transmitter. You can easily do this with the app and a Bluetooth transmitter but you can also do it manually like this: kzbin.info/www/bejne/rJm2cnZ8rJuKoZo -- It's important to have full batteries! - Try to disconnect your servo or motor If all of that didn't work it could be that your receiver is not working properly as in my case. I ordered a new one and everything was okay! Let me know if it did help you!! Greetings Robin from Amsterdam

Just sold my SS VE and thinking about getting a Territory to take the kids on trips ect. The SS wasn't practical but I'll be doing the Territory up mean ways. If I stay on 18's you reckon it'll do alright if i drop the psi for hard sand ect? It'll be AWD, if i get a RWD I'll most likely convert it to AWD

Go go

how to introduce more scratches and marring on your paintwork... by not washing before you polish.

The white wool is most aggressive not the pads

should not you first wash your car before applying a cutting compound????

Only the orange pads are firm enough to do any actual paint correction

Fyi there is a 4496 which has a 3" collector. The comp headers do sound better than the 4490 imo. Another upgrade worth doing ( but not for the un-mechanically minded) is the Fg plastic manifold, this opens up the intake and lets the engine breathe, it revs up quicker.

What is this kit, random Amazon? I am using similar for my exhaust pipes and it's so handy to have cheap throwaway pads

Congrats on the launch man ⭐️

Bro thats sick, so he got you didnt he....the bloke in the chrysler that came on the channel!

I don't understand why nobody thought about showing where to plug the camera on the rc. All videos in youtube skipped that part. Newbie here and could not find a single video where someone explained that part.

I have a question I have one just like that but with number decal on the sides and white wheels with a purple inside unlike yours that is blue is mine brushed or brushless? *PS I know nothing about rally rc cars*

I’m new to this but care to share advice on what batteries would work with the spotter v2? I have no idea what connectors on batteries will work.

Sorry about the glitches guys, hopefully it's not too bad Peace ✌️

Very nice

Thqnk u so much

Clean car bro, good looking street weapon!

i wanna cam my 302, but i was also thinking of doing a turbo build with it, but i dont really have 5k+ to buy a dart block.... whats the max i can push a standard 302 block to before it wasnt rip itself apart?

we have the exact same hood! and oddly very similar colored preludes

Nice set up!

Where did you find one with e linear antenna?

Bro can i used it on the radiolink rc8x screen?

Speedo will be out

Awesome 👌 great coverage of Allasianday2023

Great vid bro! I thought that bloke could of been a bit nastier to the supra, as in get right up it! looks like a great day though!

Absolutely excellent. I bought a 2012 Titanium last year and have ZERO regrets. You've obviously planned these upgrades with a lot of consideration and I'm getting motivation from these clips. Keep up the good work mate.

Did you get any videos from lakeside on sunday bro?