Lego Bridge Challenge #1
4:17
4 жыл бұрын
LMTV - Flag Drive By
0:12
4 жыл бұрын
LMTV doing a little work
0:56
4 жыл бұрын
Rumblin Wreck PA Demonstration
1:15
12 жыл бұрын
Пікірлер
@scottspencer3024
@scottspencer3024 8 ай бұрын
Thanks for the helpful video. I'm going to use it to inspect a M1097A2 that I'm hoping to buy.
@skmrinc4247
@skmrinc4247 2 жыл бұрын
How do you clear the codes? Can you disconnect / reconnect TCM or simply disconnect batteries? Or do you need scan tool?
@BMD11000
@BMD11000 2 жыл бұрын
Fortunately, I didn't have to get that far, so I'm unsure of the answer. I found some great information though on the GearReport site. Maybe the answer can be found there.
@mw2584
@mw2584 3 жыл бұрын
I've got an M1165 that won't go over 30mph. So followed all your steps exactly. My wait light doesn't flash. My trans light doesn't blink. Instead I get the regular routine of the wait light being solid for a couple seconds as if it's running the glow plugs, and the trans light never turns on/blinks at all. So I'm not sure how to troubleshoot from there with the jumper cable in slots A & E. I tried this by keeping that TCM box plugged in like you did, and also tried it with the main cable unplugged to that TCM box. I get the same results trying both. Any suggestions? It's in park, with parking break on, & tried various jump cables, no luck. I really don't understand why the glow plug wait light isn't flashing with that glow plug controller disconnected under the hood???
@BMD11000
@BMD11000 3 жыл бұрын
I wish I knew more and could help but I really don't know what to suggest.
@oscarvazquez-od5gd
@oscarvazquez-od5gd 2 жыл бұрын
check if the trans circuit breaker is tripped (under/behind passenger seat near battery box) if not check the resistance on the circuit breaker. if thats good check the wires for ohms and voltage then go from there
@Subgunman
@Subgunman 3 жыл бұрын
Thanks for the info! Trying to learn as much as possible before investing in the ultimate truck!
@class3333
@class3333 3 жыл бұрын
That was a very helpful and also straight to the point video - thanks for posting
@BMD11000
@BMD11000 3 жыл бұрын
I appreciate that! It was my pleasure posting it.
@cruiez2008
@cruiez2008 3 жыл бұрын
Thanks for sharing
@BMD11000
@BMD11000 3 жыл бұрын
My pleasure!
@urgentcareguy3
@urgentcareguy3 4 жыл бұрын
Tree says "It's just a bloody flesh wound, come back and fight like a man!"
@HelicoolsHelipad
@HelicoolsHelipad 4 жыл бұрын
Great project for your family. I wanted to say thanks for the LMTV tree pull video. I was inspired and made a video with a shout-out for you.
@BMD11000
@BMD11000 4 жыл бұрын
Awesome. I'll have to check it out. I'm behind on my video watching.
@stratdog79
@stratdog79 4 жыл бұрын
Leading candidate for most busted YT video of '21. Congrats!
@BMD11000
@BMD11000 4 жыл бұрын
Wow, thanks! That's quite an honor. You're right, I certainly busted that sucker out of the ground.
@HelicoolsHelipad
@HelicoolsHelipad 4 жыл бұрын
Cake-walk. Did it even break a sweat? LOL! Good show.
@BMD11000
@BMD11000 4 жыл бұрын
Absolutely no sweat!
@Joseywales414
@Joseywales414 4 жыл бұрын
Dang , wish I could have you do my Deuce up like that !
@BMD11000
@BMD11000 4 жыл бұрын
I'm building out a M1078A1 LMTV now. No videos up yep. Stay tuned.
@Joseywales414
@Joseywales414 4 жыл бұрын
Where did you get those speakers?
@Joseywales414
@Joseywales414 4 жыл бұрын
Besides asking you where you got the speakers& how much? I must say very nice job, what about those over the top spot light rack on the front bow? Is that removable & disconnects for the cover top to be put on?
@bendavis6846
@bendavis6846 4 жыл бұрын
@@Joseywales414 The speakers were from Amazon, made by Wolo. I bought basically the same PS speakers not too long ago from Amazon and paid about 1/2 of what the Wolo brand cost me. The lights on the front bow were done in such a way that the it was not compatible with the cover. However, I did design it so that it would release and new uprights and a bow could have been substituted so the cover could be put back on.
@HelicoolsHelipad
@HelicoolsHelipad 5 жыл бұрын
I can only dream of a sound system like that one... party deuce! Sadly, I have to be behind Arron's Rent-a-Center in parades to hear any sound like you have. Nice looking rig!
@BMD11000
@BMD11000 5 жыл бұрын
Thanks, I sold that one several years back. There is a build thread (Rumblin Wreck) on SS though.
@Apoc_Bone_Daddy
@Apoc_Bone_Daddy 6 жыл бұрын
What a beauty, wew Need a better taste in music, sorry bro
@BMD11000
@BMD11000 6 жыл бұрын
LOL. This video was posted 5 years ago and believe that the music was just the radio playing (hence the oshkosh b'gosh ad in the middle of the video). Maybe you should take your criticism to the radio station.
@donaldpauli129
@donaldpauli129 6 жыл бұрын
The damn music is irritating
@BMD11000
@BMD11000 6 жыл бұрын
Donald Pauli, you're irritating.
@bananared696
@bananared696 6 жыл бұрын
Gay music
@BMD11000
@BMD11000 6 жыл бұрын
Stupid comment
@craigwood9893
@craigwood9893 7 жыл бұрын
Still have the Deuce?.....love the vids, currently decking mine out now, all because of this vid!
@BMD11000
@BMD11000 7 жыл бұрын
I sold it about 4 years ago when we moved to a new house. I eventually plan on getting an LMTV (M1078) and tricking it out the same way. The M35A3 was super cool but I want to be able to go more than 45mph. I have a build thread for this deuce on Steel Soldiers if you want to check it out (www.steelsoldiers.com/showthread.php?92951-Rumblin-Wreck-Build).
@craigwood9893
@craigwood9893 7 жыл бұрын
Nice!....I'm there also, will look it up.
@Joseywales414
@Joseywales414 4 жыл бұрын
@@BMD11000 well, Garrett from tactical repair did his snowball up with a Cummings and I think he gets it up over 70+ . I know it freaking moves! Come on get another Deuce !
@bendavis6846
@bendavis6846 4 жыл бұрын
@@Joseywales414 I have a M1078A1 now. It does 58mph. Probably going to swap to high speed gears and a diff lock.
@inrustwetrust5395
@inrustwetrust5395 7 жыл бұрын
That's genius having the horns operated by a fake start button. Thieves wouldn't know what hit them.
@MrJlhhagood2
@MrJlhhagood2 9 жыл бұрын
Did you run a battery isolater or a step down to add the radio.
@BMD11000
@BMD11000 9 жыл бұрын
I used a 24v to 12v power converter.
@NSBigBlue
@NSBigBlue 10 жыл бұрын
Could I run one of these on waste oil or vegetable oil? I'll have the oil and that cleaned down to one micron and for every 50 gallons of it use 5 gallons diesel. I'm hoping I'll safe fuel this way
@Rick1885
@Rick1885 10 жыл бұрын
As long as it burns, that's all that matters.
@BMD11000
@BMD11000 9 жыл бұрын
No. This is not a "multi fuel" deuce. It is a M35A3 not an M35A2 and therefore has a Caterpillar 3116 engine that is diesel fuel only.
@MartysDamnRelaxingSounds
@MartysDamnRelaxingSounds 6 жыл бұрын
NO don't fuck around with stupid shit. Stick with Diesel. The A3 was a Cat engine not a Multifuel.
@danwindover2286
@danwindover2286 10 жыл бұрын
how did you run 12v power? have a stepdown or something?
@BMD11000
@BMD11000 10 жыл бұрын
I used two 720 watt Pyle 24 volt to 12 volt power converters to handle the stereo system, The off road lights are 24 volt.
@BMD11000
@BMD11000 11 жыл бұрын
That is just a 25 gallon air tank that I would occasionally run with the truck's on board air system so that I would have more stored air if needed to run air tools.
@thalesrezende613
@thalesrezende613 11 жыл бұрын
nice man! What is that air tank in the back?thx
@BMD11000
@BMD11000 11 жыл бұрын
Aaron, too much to list. But.... basically, 4 speakers, 4 PAs, and 2 subwoofes.
@Killer77x76
@Killer77x76 11 жыл бұрын
What did you all put in to it ?
@13tucker45
@13tucker45 11 жыл бұрын
That'd be fun in a parade. Very nice work, I was creeping on SS watching your build.