Was the fitment issue corrected? I just ordered this exhaust and now I’m kind of worried about it.
@Josnatch6 ай бұрын
Tyler is annoying.
@kaskenova10 ай бұрын
Was hoping to see how to properly out the high beam and check engine light in the new spot but unfortunately it wasn't in.
@adamhonn8168 Жыл бұрын
Did it actually make any more power?
@corybohn2013 Жыл бұрын
Mmm hot air intake
@Legend57. Жыл бұрын
My thoughts exactly...Right by the manifold to...
@kona64518 ай бұрын
@@Legend57. exactly hahahahaha
@nathandavis75922 жыл бұрын
what bolt pattern is the wheel?
@VDmXGame2 жыл бұрын
Yo guy’s nice vid, thats a 1.6 or 1.8 ?
@meestaShin2 жыл бұрын
You actually lost more speed with that type of intake. The best intakes are right behind the grill, so they don't take in hot air from near the engine.
@2seater_mx5 Жыл бұрын
i'd say no gain nor lose (noticeable, at leat) but yeah thats terrible. its missing an airbox and a way to bring cold air to that airbox.
@przemysawdembinski6997 Жыл бұрын
Or if you want to play it this way, make it custom as close to the radiator as you can. But that's probably more for esthetics/sound than a power increase
@Boosted_Bohlman2 жыл бұрын
Haha, yall are inSarasota utc mall. My homie just got his firsta st recently and we are local to satasota.
@RVLPHIEBOI2 жыл бұрын
How bad was the drone?
@paulbusalacchi2970 Жыл бұрын
If you drive on the highway at all, you will hate it and regret it. Keep your car stock, my opinion. You do you.
@theighthokage29433 жыл бұрын
Is there a way to get the stock exhaust off without cutting 🥴
@Janice.Longoria.3 жыл бұрын
would this radiator work with a stock 1990 miata?
@twomustangs Жыл бұрын
Just installed this radiator and kept stock fans in my '91. The radiator is actually too wide. I had to bend the lower mounts and then bend them back. Had to cut away shroud plastic to get fans to fit.
@lopermachine3 жыл бұрын
Just installed this with the same fitment issues, I heated and bent the front most hanger and shimmed both front and back rubber bushings with about a 1/2” of rubber. Testing tomorrow
@tijnbrackel27123 жыл бұрын
You should’ve disconnected the battery, the airbag can’t go off that way
@4door_papi2 жыл бұрын
He said he disconnected it lol
@z34aaron293 жыл бұрын
Did ya ever figure out the horn?
@lemonst4nk3 жыл бұрын
aren't you missing a heatshield between the intake and the manifold?
@oaks1k522 жыл бұрын
No heat shield for the Miata bra fuck that
@TkErz3 жыл бұрын
I recently installed this exact exhaust and have also been having issues with the rattling. I was wondering if you guys had the tailpipe hitting the rear towhook as well and what you did to fix it if so.
@TwistedThrottleyt3 жыл бұрын
I put zipties on all the hangers to tighten it up and it worked
@stringersociety99833 жыл бұрын
What size are these tires and are these BR’s the extreme low version?
@jaym25693 жыл бұрын
Cool video I have the same exhaust on my fist it sounds good but drones pretty bad..🤷🏻♂️
@imstuner3 жыл бұрын
The Radiator might be ok but the fan kit not so much. The fan just doesn't pull enough air and the shroud is placed to close to the radiator. Your Stock Fans do a better job than the Mishmoto fan kit. I'm going to go with a cross flow from FM or Supermiata.
@markhammond38003 жыл бұрын
Do you know if x27.168 stepper motors fit and work please.
@onlywenilaugh65893 жыл бұрын
250 bucks for hose, clamps and filter to suck in all the HOT air from the exhaust manifold. Ouch
@xenokyomi Жыл бұрын
The stock intake is also pretty bad for that since the airbox containing the panel filters sits right on top of the exhaust manifold, and it sucks air from behind the right headlamp (looking front on), which is basically where the pod filter sits now. The early mx5's don't really have any easy way to move the filters away from the exhaust since there's very little room to route piping. The difference in cold air and hot air is pretty negligible also in terms of power, just that the early mx5s also had a fairly restrictive intake system, so changing it even for a system like this will improve performance at least little just due to a better free flowing system. Or at the very least, not change much at all aside from response and sound.
@2seater_mx5 Жыл бұрын
@@xenokyomi i agree, i dont think this adds or takes no more than 2hp up or down (not gonna notice that). Add a heat shield (air box) and a snorkel-like tube to throw air inside that box from the bumper that is the key.
@onlywenilaugh6589 Жыл бұрын
@@xenokyomi Not sure why they call it a cold air intake then. hehe. In any case, it's overpriced but they charge what people will pay eh.
@xenokyomi Жыл бұрын
@@onlywenilaugh6589 That's just the common name for any intake or change to the stock intake, it is also wording that gets clicks. However something like this will still improve performance. Being that is it less restrictive than the stock system, there is capability of having more air. On it's own you'll maybe only get a 1-2% increase in power, or see no change. However with more modifications, and a good tune? You'll see gains. Especially if you can move the filter out of the engine bay and prevent heat soak. The point of the matter is, the stock intake is far worse for the MX5. You can also just make your own system of course, but people will pay for something that has been designed by a group of engineers, and something that is a drop in replacement without any fuss of having to get all the materials, measure things and make cuts. You're really just paying for convenience and something that looks professionally made, and to most people that's worth it as is. A much better system is the cobalt CAI imo, it includes a heat shield and does move the filter further away from the engine, or about as far away as you can get for the MX5. So it is actually a CAI.
@mikeylarsen56277 ай бұрын
When i bought myself one of these i went into it knowing this problem so i ended up making a heat shield and attached a couple of plastic pipes from the front bumper up to the air intake, it ended up working really well in the end but the only problem is that i have to block off the hoses durring winter because it gets too cold and the engine will not heat up
@ClarityYawden3 жыл бұрын
Can you link all the parts you used
@ymcmb6773 жыл бұрын
bro its in the tittle in the description and he even said it in the video ........
@ymcmb6773 жыл бұрын
its one of the first things on amazon too lmaooooo
@mr2matt3 жыл бұрын
All youtubers say its hard to get the full volume on camera, i got one of these and understood quickly lol
@BenLam204 ай бұрын
How much louder from stock?
@zfrsnydr35393 жыл бұрын
can you give a link link of led bulbs
@diegovera18473 жыл бұрын
I want them as well
@SLO_MZ33 жыл бұрын
You can get them with the gauges it's an extra option
Hey! It sounds awesome, about to pick up one of these myself... wanted to know what the wheels were on there?
@nolahahnshouse33893 жыл бұрын
Love my isr on my miata!
@brg_chase3 жыл бұрын
If you want your exhaust to hang higher get some hose clamps and put them on the hangers or get some aftermarket hangers that are shorter
@michaelelwart46983 жыл бұрын
Was the fronts maxed out? If not how much more could you go.
@Boonmeeist3 жыл бұрын
Is it annoyingly loud on highway? It's hard to tell how loud it is through a video. I've been thinking of getting one.
@nolahahnshouse33893 жыл бұрын
I have one and no it's not.
@Star02Lord2 жыл бұрын
@@nolahahnshouse3389 If you had to rate the sound from 1-10 what would you rate it? It sounds louder then a borla exhaust like I got, I want something louder and I'm thinking about getting the Isr.
@RealDovamo Жыл бұрын
@@Star02Lord I have one I just installed today on my ND1, on the highway I'd say it's a 7/10 in loudness, esp if you drop a few gears and punch it. At some rpms it sounds like a straight up tuba horn or something. And that's without a muffler delete. IT's only the first day but I'm already wondering if Im going to get pulled over lmao
@cbink79573 жыл бұрын
How is the highway drone on it?
@benjaminvaughan44813 жыл бұрын
I’m about to pick up some bc’s myself for my nb but was wondering if you guys were maxed out in the rear or could you go lower? Debating if I need the extreme lows but I’m only planning on dropping my car another 1/2 inch lower than yours so if you had more adjustment to go lower lmk
@lifeofhuelot92713 жыл бұрын
When we put the coilovers on we still had so much play to go lower if we wanted. I still have to get the perfect fitment but with what i have now im like maybe 4 to 6 inches off the ground haha i could go much lower we just didnt want any rubbing. hope that helps! thanks for the support! :)
@crabgtavandmore20573 жыл бұрын
Could you send me a link for where you got this? This is exactly what I want
@lifeofhuelot92713 жыл бұрын
Yea no problem! heres the link www.cjponyparts.com/mbrp-cat-back-exhaust-system-xp-series-3-fiesta-st-2014-2019/p/S4202409/
@crabgtavandmore20573 жыл бұрын
@@lifeofhuelot9271 thanks!
@henrykszymczak42333 жыл бұрын
Nice
@lifeofhuelot92713 жыл бұрын
Thank you! We appreciate the support
@cjcab4363 жыл бұрын
ISR exhaust?
@lifeofhuelot92713 жыл бұрын
yes! best exhaust for miatas in my option. We have a video of us installing it and how it went if you want to check it out!
@travhxc11744 жыл бұрын
LONG HAIR. I wanna do intake and exhaust on my Tacoma. Buuuuttttt you should LS swap it
@lifeofhuelot92714 жыл бұрын
haha i just cut the hair, i plan on doing a turbo first then down the road LS swap would be something fun to do!
@cre8tivegarage1574 жыл бұрын
Cre8tive garage here showing love keep up the hard work we stopping by from Las Vegas 🏎👋 We love the channel vibes 🥂