🆒 video, ℹ️’Ⓜ️ the KING 👑 of LRP cause ℹ️ have 2️⃣0️⃣ extra or spare BIG block engines & 🔷 is better 🤑👍🏼🪛🏁
@edwinthomas6183 ай бұрын
Your eyesight and depth perception has to be on point. This makes my Roban Ec665 700 look like. Mg midget
@2dopewntstp3 ай бұрын
Mines is just finished and it wont move is dat has anything to do with any remote settings new to the rc world
@olivierplayer16336 ай бұрын
how much does savage xl weight ?
@illhairacing35437 ай бұрын
I need help with mines I’m running a castle momba monster x 8s and TP motor and on the controller it says it don’t accept it. Meaning I can’t use with with this setup I’m not sure what’s going on I have a power HD brushless high voltage servo
@nunu46927 ай бұрын
so your controller, the radio transmitter says that? i have never seen anything like that before happen. my boys they run that setup mm8s with tp motor for their speed runs they insane.
@illhairacing35437 ай бұрын
@@nunu4692 I figured it out I was on the wrong settings
@illhairacing35437 ай бұрын
For some odd reason my car keeps going to left a little I tried everything to get it to go streight do you have Instagram I can maybe share you what’s happening cause I definitely need some help
@nunu46927 ай бұрын
send me a link to the video right here
@illhairacing35437 ай бұрын
@@nunu4692 okay I’ll make a video tomorrow
@DifalcoConcrete7 ай бұрын
Nice , looks tough after that run . Was the diff screws hard even with heat ? Cheers ✌️🤙
@nunu46927 ай бұрын
it came loose after i swapped the center diff fluid to 2pmil dip, retighten it and its all good. also the pinion came loose to but its back in place no big deal. this truck can handle some decent upgrades.
@DifalcoConcrete7 ай бұрын
Awesome run , I’m watching vids on the savage , may get one . Thanks for talking and showing everything. 👌👊
@DifalcoConcrete7 ай бұрын
Nice video, do you still have it ? 🤙👌
@nunu46927 ай бұрын
yes, just released 3 videos of it.
@Shellzwick8 ай бұрын
That truck is amazing looking and performs well
@nunu46928 ай бұрын
and yeah, the regular things must be checked like the wheel hexes, pinion, it came loose but that cuz i thre in 20mill dip in the center drive.
@Shellzwick8 ай бұрын
What size is that truck . Is it close to an 1/8 Arrma
@nunu46928 ай бұрын
yeah just like an 8th scale kraton and handles very alike. only thing is that based on the different design the savage cg is a little higher. lipo swap is a breeze compared the kraton.
@Shellzwick8 ай бұрын
@@nunu4692 ok cool . I'm liking this truck . Gotta do my research
@allaspectsrc41788 ай бұрын
Love the savage
@nunu46928 ай бұрын
i made that an xl now
@allaspectsrc41788 ай бұрын
I got to find one
@allaspectsrc41788 ай бұрын
Looks like u had a ball
@nunu46928 ай бұрын
i have one more video to publish wait till u see it😂
@BeauchMane10 ай бұрын
Nice 🤜🤛
@christopherbabcock792811 ай бұрын
Hey guys, I spent all winter doing this, image no women, I can’t get laid, trade me, I need RC cars hahahaah, what a bitch.
@christopherbabcock792811 ай бұрын
Hahahah an RC bitch that talks.
@EXTREMERC41611 ай бұрын
Can u post the video for the controller?
@nunu469211 ай бұрын
kzbin.info/www/bejne/oJ3ZXnmPmdukiNk
@jackdurden466 Жыл бұрын
Damn! I found your listing and had to see how that dual exhaust played out. They’re notorious for tuning issues, but yours sounds great!
@nunu4692 Жыл бұрын
she squats hard😂🔥🔥🔥
@sm0keu Жыл бұрын
Bro that is awesome great video Iv just ordered a big block kit for my revo gone put the same engine in f4.6 did you have to cut the chassis?
@nunu4692 Жыл бұрын
had to move the transmission forward so get the 3.3 chassis, the big block mount drops right in.
@sm0keu Жыл бұрын
Ok thanks for you rapid reply
@xswd3x Жыл бұрын
Did you have to shave the steering rack??
@nunu4692 Жыл бұрын
no not at all.
@jeffdavis67154 ай бұрын
If you run a 56118 motor you need the m2s bell crank
@blkft Жыл бұрын
Question, regarding Ch5 and Ch6? Is it possible to have a esc on each channel and operate them proportionally in forward and reverse (with neutral)?
@nunu4692 Жыл бұрын
YES, Both channels goes from -100 to +100, 0 being neutral.
@riftur7636 Жыл бұрын
i need some help deciding if the Arrma Nero Big Rock is still worth around $500? I love the look of the truck but have never driven it so I need anyones opinion of the truck. If your got totally trashed today, would you buy a used 1 for $500 in pretty good shape?
@nunu4692 Жыл бұрын
yes, but thats the fan speaking out of me, still buying a nero in parts will sit u close to 1k or more (thats how i have mine) so buying a used one for even 450 is possible and there are alot of parts for it online on ebay ask me how i know😂 i still bash the hell out of mine no fear. mine has an 8s system but i only run it at 6s. its a beast n mine is a little too heavy. so yeah get one if you like to own one ppl still buying them.
@mojojoji5493 Жыл бұрын
Wheels are horrible as my Amazon rc’s
@nunu4692 Жыл бұрын
mmmmhahahahahahaha maaaan i knoooo but sht, i swapped them with 7inches short course tires the duratrax dinero sc 24mm wheels i threw these away, ima post a video of this car this week stay in touch my guy😁 btw this motor was a cy 21.5cc it has now a 34cc g320 🔥🔥🔥
@mdemers767 Жыл бұрын
Awesome! Always wondered why my steering freaked out when when I flipped my Gen8 over to work on something and it was on. Never knew it had a gyro in it. Have to turn that setting off for this model. I will DEFINITELY be keeping it on for my Shumacher Procat K1 though... that thing is so squirrely unless you eeeeeaaassseee on the throttle.
@nunu4692 Жыл бұрын
wow i see, yeah i want to say that this transmitter is fully complete and alot of ppl domt even know aboit the svc (gyro), it even has crab steering😂
@nunu4692 Жыл бұрын
hello, back again😂 i was reading your comment again, the last sentences there, what you should do is at the svc setting keep that on, scroll down look for throttle gain, set that on and go to something like 70% and try taking off full send, what it does it that it cuts back throttle when the vehicle gets sidesway and regain throttle once it straithens(i fuked that word up😂) out. lower that number and try again until u can control the squirry fishtailing. ALSO, Priority: set it to on and keep it on a low %#, the gyro will keep that car,,,,,,,, mmmm, think of it as if its making the car run understeered, so the faster you go the less steering the reciever will do even if u steer the controller all the way, the gyro will prevent a spinouts. so the slower u go the closer the steering circle will be. the faster u go the larger the steering circle will be. this is usefull when going from 10mph to full speed pass, circuit racing.
@mdemers767 Жыл бұрын
@@nunu4692 - Awesome! Thanks for the tips!🎯
@hybrid32494 Жыл бұрын
Hey my dude! Im glad to see you out there burning nitro and the bullet is running great!! I love mine too, it's a highly under appreciated nitro right?
@nunu4692 Жыл бұрын
yes it is way underrated, this thing is built to take a curb head on no bs everything is beafed up 8shocks 4x4 big center drive its crazy also the little engine it has it have more than enough power to make this bullet go fast🔥🔥🔥
@JAUNTINGFOX Жыл бұрын
Keep it up
@allaspectsrc4178 Жыл бұрын
That's wild
@allaspectsrc4178 Жыл бұрын
Nice vid bro ..I seen u in nitro gang group
@nunu4692 Жыл бұрын
yeah i b there often n in nitro rc aswell i gota start making more videos now that the weather finaly let up
@allaspectsrc4178 Жыл бұрын
@@nunu4692 me too gonna post something tonight
@chiragghuman Жыл бұрын
HPI used to be at the top of their game with durability and most of their kits used to be Made in Japan at one point. Then compromises started happening and they shifted to Taiwan (Still ok, although not acceptable to me). Apparently, under the third ownership they've shifted the production further to China! Now that's downright cheap and it shows clearly in all their current kits. The cheap feeling plastics, anodizing and even the durability sucks for what it is. But on the other hand, their prices are higher than the competition for some reason. It would be really stupid to buy a Chinese made low quality truck with durability issues and lack of parts support right now. Yes, if they decide to produce their kits in Europe and Japan at this price with better quality, I'm game!
@nunu4692 Жыл бұрын
thats exactly what i was talking with my friend about i wished hobby horizon wouldev had bought hpi outright.
@savagex466-qt1io Жыл бұрын
Mine was made in Japan back in the day. What RC brands are not made in China these days ? Whats the most durable 1/8th truck you can get RTR ?
@nunu4692 Жыл бұрын
savage😂 like what else? mojave or the hobao mt nitro🤷♂️ the 4s maxx is rough as bricks
@gomaaalbwab Жыл бұрын
Nice 🙂👍
@BraverYoshi Жыл бұрын
Wheel check maby ? xD
@nunu4692 Жыл бұрын
they big😂
@johnpatrickwoolbright4232 Жыл бұрын
p̳r̳o̳m̳o̳s̳m̳
@nunu4692 Жыл бұрын
What
@vannigiovannigio8861 Жыл бұрын
Yo you from dirty jerz? Dope truck and proper video.
@nunu4692 Жыл бұрын
jerz as in jersey🤔 yup😂
@rcmafia2 Жыл бұрын
💪👊
@nunu4692 Жыл бұрын
💪🏾🔥
@rcmafia2 Жыл бұрын
kzbin.info/www/bejne/qWfcl6qposd0nLM
@hybrid32494 Жыл бұрын
hey bro! The NitroGang is here! That is one DOPE revo, 2-speed is good and the smoke is super Sickening with the dual rear pipes.
@nunu4692 Жыл бұрын
thats my mf ferrari double exaust pipe😂😂😂 but in all seriousness it took me alot of thinkering to make it fit n properly work i love it thanks alot man🔥
@joshchatwin8569 Жыл бұрын
That's the bigger one ain't it that's so nice
@nunu4692 Жыл бұрын
yes is the new xl electric model i havent ran it yet, i'd like to have the nitro model aswell.
@eprohoda Жыл бұрын
Enjoyed!really beautiful content, fellow!
@nunu4692 Жыл бұрын
thanks mate i appreciate that alot this savage is something else.
@RayRiv732 жыл бұрын
Basically in a nutshell, the gyro counter steers for you 🤷🏽♂️ thanks for the help.
@nunu46922 жыл бұрын
yup, it keeps the car straight
@ensarmusovic2 жыл бұрын
Hey there, do you still own that laptop with i5 7300hq? I wanna ask did you have any problems with it? Sorry for asking here, didn't know where else to contact you.
@nunu46922 жыл бұрын
wow yes i still do still runs like brand new, fast, games great, i still use it for 3d cad modelling and rendering, thin, not so light but is not that heavy considering its a 15inch size man i love it.
@ensarmusovic2 жыл бұрын
@@nunu4692 what about battery? How long does it last on browsing and normal stuff?
@nunu46922 жыл бұрын
it last pretty long, i wanna say an a couple of hours depending what you r doing, to b honest the only only reason i open my laptop lid is when im am going to do 3d modelling design for 3d printing for parts thats it so.
@CrucialRC2 жыл бұрын
Nice. Should try a 23cc gas in it some day.
@nunu46922 жыл бұрын
got me thinking now, i was planning making this a twin .28 but gas🤔 interesting😂
@CrucialRC2 жыл бұрын
@@nunu4692 dooooo iiiitttttt😅
@nunu46922 жыл бұрын
gota look for the engine though, but will do later on😁
@fbiagent33992 жыл бұрын
balance the wheels.. they will mess up yo bearings pretty damn quickly
@nunu46922 жыл бұрын
right😂 in my dumbfounded defense those are duratrax six packs x's, thanks for you huge advice, ima keep this car shelf queen since its a very very rare vintage gas car is 99% stock, only thing not stock are the wheels, and it runs😁🥵
@outdoorman60182 жыл бұрын
I told you that body would fit
@la.boricua8002 жыл бұрын
Sweet n smooth,nice
@nunu46922 жыл бұрын
it came out nice n is still not done
@GavinY2 жыл бұрын
Schweet
@nunu46922 жыл бұрын
She riiips lol
@GavinY2 жыл бұрын
@@nunu4692 That long shafts must mean some torque multiplication at the diffs
@nunu46922 жыл бұрын
Could be, thing is this redcat might be a 1/6 scale size but the only that size is the chassis plate, the drivetrain is basically 1/10 scale BUT, they are hard aF, i had to use smaller wheels, eventualy ima go bigger once i install the other motor😁🔥
@luisarvelo2532 жыл бұрын
Cuando lo terminastes
@nunu46922 жыл бұрын
ayer
@kingkongrc2472 жыл бұрын
Yeah ripper for sure 👍
@kingkongrc2472 жыл бұрын
Nice action awesome rigs ripping up sh**t i love it💤💤💥💥👍
@nunu46922 жыл бұрын
thanks man wait till you see my nitro redcat shredder😂
@Openseason20112 жыл бұрын
I got the same controller but I hear some loose thing inside it when I shake it, is that normal?