I'm in Canada and couldn't find the gears, but I ordered a new motor on Amazon for $17.95 with free next day delivery. I just replaced the motor last fall, so I'm not sure what's going on, but hopefully this one lasts longer. Thanks for the video
@кариКари-ц2щ4 ай бұрын
Приветствую, хотел узнать по запчасти на Ниссан алтима l31. в личный кабинет
@CactusNaga4 ай бұрын
Privet. I buy my parts mostly on ebay and Amazon. Thanks for watching and commenting!
@EfraECR4 ай бұрын
Thanks sir! This work it! Now to enjoy coffee time
@CactusNaga4 ай бұрын
Excellent!! Have a great day.
@omarfmartinez41924 ай бұрын
Thank you sir 💯🔥
@CactusNaga4 ай бұрын
Thanks for watching and commenting!
@brodymale74905 ай бұрын
Saved me brother, thank you
@CactusNaga5 ай бұрын
Glad it helped. Thanks for watching and commenting!
@JackDawson-qk5sg7 ай бұрын
I had no movement so I bought a new motor on eBay and it to does not work. Where do I go now?
@Dayvid85-s4o7 ай бұрын
Just wondering if you can put a 2000 tail lights to a 2002 solara
@CactusNaga7 ай бұрын
Hello there. Thanks for watching and commenting. I believe you are out of luck on this. Taillight configuration changed between 2001 and 2002.
@christiney73368 ай бұрын
As soon as I took off brush part I found what I thought was a black rubber washer ...it was just hair spun around the gear as soon as I removed it worked perfectly.
@CactusNaga8 ай бұрын
Nice!! Glad it all worked out. Thanks for watching and commenting.
@MarcRachel8 ай бұрын
This video was very helpful in guiding me in taking my keurig apart so I can access the pump inside.
@CactusNaga8 ай бұрын
Glad the video was helpful. Thanks for watching and commenting!
@jamesstewart103310 ай бұрын
Thank you! After replacing the capacitor, which indeed tested bad, I was a bit stuck.
@mollylenyo140710 ай бұрын
do i separate the glass the same way on a Kitchen aid microwave as well?
@maulmusix Жыл бұрын
very good info, I needed to get to glass, has a paint spot on it from factory,they left it there, but I think factory should make it easier snap n screws
@rigorodriguez4565 Жыл бұрын
Would the tile work for porcelain too? And do all these steps apply for porcelain as well?
@CactusNaga Жыл бұрын
Hello there. The process is very similar with porcelain tile. Thanks for watching and commenting!
@leoramirez3588 Жыл бұрын
I was so worried when I got my keruig off of Facebook and it didn't even wanna heat up it would just give me the error. After calling and them giving up and giving me a discount and I was able to open after struggling and then the keruig just started working so now I have a working keruig thanks to you
@justinevans7501 Жыл бұрын
Very helpful, thank you
@ManuelGarcia-vt1hk Жыл бұрын
If the problem is that this is plastic that worn out, why don;t make them out of METAL??I bought it a year ago and it has already faild me twice, as it was under warranty the send me a new motor set, THEY SHOULD SOLVE THIS BIG PROBLEM !!!!!..
@janteisinger3481 Жыл бұрын
Your video just saved my washer, almost gave up on it! Everything seemed to work, only the motor was not getting juice. Even changed the capacitor, still nothing. Then I took off the centrifugal switch, clicked it a few times, blasted it with air and motor starts humming. Thank you!
@CactusNaga Жыл бұрын
Really glad to hear that the video helped! Thanks for commenting.
@roadstar499 Жыл бұрын
When i first got my 2005 altima i replaced 3 mounts..but it real bad after 18k miles..i think its that right side...car really makes some crazy noises, plus shakes just in driveway...i think nissan dropped the ball on their mount designs..thanks
@CactusNaga Жыл бұрын
I agree!! Thanks for commenting!
@Shannonveganmama Жыл бұрын
Thank you so much for this!! this is going to be my next project!
@80085u Жыл бұрын
If you don’t replace thermostat will it cause problems for the car?
@CactusNaga Жыл бұрын
I would think so. The engine is not operating at its best temperature and the fuel mixture is always too rich. That can cause carbon build-up inside the cylinders as well as overload the catalytic converter. Thanks for watching and commenting!
@rocksaltandnails Жыл бұрын
Spoiler alert: money shot is inexplicably missing
@carloslarosa5654 Жыл бұрын
Great video and details
@CactusNaga Жыл бұрын
Glad the video helped! Thanks for watching and commenting.
@Iamacardinalfan Жыл бұрын
Just wanted to say thanks. Your guide helped me immensely.
@CactusNaga Жыл бұрын
Appreciate the feedback, Hacker Man. Glad it worked out. Thanks for watching and commenting!
@blt981 Жыл бұрын
You should of sat on it to help set it..
@blt981 Жыл бұрын
You need to buy a couple of pipe wrenches . Not expensive . A 12 inch and a 16 inch. I’m a serious DIYer son of a plumber. Learned lots from father who is gone. You did good brother…
@gerryblanke9457 Жыл бұрын
You saved me a couple hundred bucks from buying a new roomba! My gear wasn’t stripped but the gear was stuck on some hard residue that had built up around the hole where it came through the motor. I got it off and it works great now. Thank you!
@CactusNaga Жыл бұрын
Glad it worked out! Thanks for watching and commenting!
@laurisabele5298 Жыл бұрын
Thank you!
@CactusNaga Жыл бұрын
Glad the video helped! Thanks for watching and commenting.
@deansmall8668 Жыл бұрын
Helped me alot.
@mikeyangel1067 Жыл бұрын
I do not recommend this repair procedure; unless u want to see your home in flames. That sensor is an air sensor that is protecting the water pumping chamber from exploding. Tnx
@roadstar499 Жыл бұрын
dont need to remove battery..but you will need a breaker bar .. the 14mm on bottom and the long 17mm on top hold it in place are very tight..
@chriseyestone5786 Жыл бұрын
Thank you so much for sharing! Just used it to fix the exact same problem on my 2016.
@CactusNaga Жыл бұрын
Thanks for watching and commenting! Glad the video helped.
@jenniferm5375 Жыл бұрын
That's a good one centrifugal switch is somewhere in there,
@QueenBee-hk9xl Жыл бұрын
Thank you. Valvoline wanted to charge me $20 for this. I ❤️ DIY projects. Keep teaching us! I APPRECIATE YOU!
@EduardoRRCarvalho Жыл бұрын
Hey! Someone knows where i can find gears for Roomba i3 series?
@jieglenn7878 Жыл бұрын
Clear video how to change passenger side engine mount. Anyone knows the torque specs for the different bolts?
@stuartj1968 Жыл бұрын
Thanks. I bet you did that when Mrs Naga was out shopping and you were abusing her paring knife.
@ronyjimenez79542 жыл бұрын
Hello where do you buy the bracket my nissan have the same problem but I can’t find the piece
@ronnell2152 жыл бұрын
You did a good job 💯 & made it look ez 💪🏾💪🏾
@itsamebeingme93972 жыл бұрын
Thank you, thank you, thank you! I was able to fix myself after watching your video! :)
@GouldResearchSvcs2 жыл бұрын
Thank you. Your instructions are clear & simple to follow.
@user-iq5pw1te8u2 жыл бұрын
What’s both name of the parts I need both can’t find it
@nicoleberreth34082 жыл бұрын
Thank you for your videos, it was super helpful! Can you explain why you have to clean up the lines for the before pouring grout? Wouldn’t the grout cover it up?
@CactusNaga2 жыл бұрын
Hello! The grout space usually get filled (sometimes overfilled) by the thinset. If you don't clean out the thinset, it can lead to a too-thin cover of grout. There are chemicals in the thinset that will discolor the grout, and if the grout cover is too thin, the discoloration will show up on the surface. Thanks for watching and commenting!
@sherrieanne56752 жыл бұрын
You are very good at explaining your steps. Thanks for putting together a great video
@CactusNaga2 жыл бұрын
Appreciate your kind comment. Thanks for watching and commenting!
@кариКари-ц2щ2 жыл бұрын
Приветствую тебя! Залил в систему охлаждения дистиллированную воду после ремонта радиатора. Подскажи пожалуйста , где находится сливная пробка на блоке . или все сливается через пробку радиатора. Алтима 2.5 2002года. Заранее спасибо!
@CactusNaga2 жыл бұрын
Привет! Слив находится внизу радиатора. Спасибо за просмотр и комментарий!
@stevesan2 жыл бұрын
My problem exactly. Cheers!
@greggbsmith12 жыл бұрын
can I get the specific part to order that has the 3 screw holes please Gregg
@johnbender2806 Жыл бұрын
Part no: 20731
@prostreets1092 жыл бұрын
What is the purpose your video , if your not going to show how bro remove and replace the belt, TOTALLY UNCALLED FOR
@yuh.pringle2 жыл бұрын
i love that even 5 whole years later this legend is still responding to comments