Thank you, I always wondered how this magnet design works.
@jonBS4Ай бұрын
You’re welcome!
@sgataticalteam3 ай бұрын
This was super helpful. Thank you!
@jonBS43 ай бұрын
So glad to hear it!
@lizzyoffside6 ай бұрын
Excellent video! I was struggling to disassemble the pieces for installation and had no idea there was a correction direction to install the plate so it would line up correctly. Thank you so much for such a helpful and informative video!
@jonBS46 ай бұрын
Glad it helped!
@AmosAmerica6 ай бұрын
Good tutorial. Can you tell us which is the magnetic part and which is not?
@jonBS46 ай бұрын
The magnet is the circular portion that’s at the end of the prong / post that I tried to level out at the 1:20 mark. The cup itself is just a magnetically attracted metal, like steel.
@canonfodder80811 ай бұрын
If you put the button on the baseboard then you wont have the post stuck in the way while cleaning...
@jonBS411 ай бұрын
You are absolutely correct. I preferred not having a solid post sticking out from the door swinging back and forth, as I’d invariably catch the top of my foot or ankle on it.
@rEcOiL1971 Жыл бұрын
"Thumbs up" instructions that came with it didn't explain anything, so thanks
@lHUFFY42 Жыл бұрын
My good how olds that toilet. I’ve never seen one like that.
@jonBS4 Жыл бұрын
It’s an American Standard dual flush toilet from 2009.
@GhostDrummer Жыл бұрын
Yeah!!! I installed a few of these years ago but I completely forgot how that small part worked. Thank you!!!
@jonBS4 Жыл бұрын
Happy to hear it helped!
@ladyteka2430 Жыл бұрын
THANK YOU!!!
@jonBS4 Жыл бұрын
I’m glad to hear that it helped you!
@fredrva6672 жыл бұрын
Thank you! The instructions on the packaging were worthless.
@jonBS42 жыл бұрын
I couldn’t agree more!
@12345hin14092 жыл бұрын
❤️❤️❤️❤️❤️
@crazylegs9102 жыл бұрын
Best video for this install. Did you have to pre-drill the holes or did you just screw it in?
@jonBS42 жыл бұрын
I’m my case I didn’t bother pre-drilling the holes, but you can if you find the screws too difficult to put into the wall or door by hand. If you need to use the included wall plugs then you’ll definitely need to pre-drill the holes.
@eileenlutz5692 жыл бұрын
Thank you! Bought this today but couldn't figure out how to remove the screw plate from the door side of the unit. Really appreciate your taking the time to help out civilians like me 😄
@jonBS42 жыл бұрын
I’m glad it helped you Eileen, we all had to start somewhere!
@mawbbb73552 жыл бұрын
Use needle nose pliers to take the base off the cup. Thank you!!!!!
@jonBS42 жыл бұрын
Glad to hear you found it helpful!
@eb98442 жыл бұрын
I was stumped and watched your vid. Pliers worked like a charm. Finished installing 2 and have 2 more to go. As an older woman with teens, I hate to have to hire someone to do simple things around the house when there are people like you posting vids with clear and simple instructions. Thanks for the great video. 💕🇨🇦
@jonBS42 жыл бұрын
Thank you for such great feedback!
@1ScruLoose2 жыл бұрын
Can you raise the level higher and put the stopper on the wall rather than the rod, to make it easier when vacuuming or mopping?
@jonBS42 жыл бұрын
You can absolutely swap the rod from the wall to the door if that suits you better. As far as raising it higher up for more clearance, you can go as high as you want so long as you have something solid to fasten both ends to. I hope that helps!
@reflectivedetails62892 жыл бұрын
Great video thank you… do you know if the magnets strong enough to stop a toddler or 2 from closing the door?
@jonBS42 жыл бұрын
I suppose it would depend upon the toddler. It takes a decent amount of force to overcome the magnetic attraction, but it’s not likely going to stop a determined “door closer”. You would probably need to use a mechanical latch mounted higher up on the door to stop a toddler.
@ohsorelaxing57432 жыл бұрын
Thanks for the video! Was trying every tool including the kitchen sink to open the small springed part! This video was the aha moment!
@MrJarrod2 жыл бұрын
Thankyou very much as a first time home owner never had to do anything like this before.
@jonBS42 жыл бұрын
I’m glad it helped!
@petewade41013 жыл бұрын
Thanks for the video took me 1 beer to install.
@jonBS43 жыл бұрын
Cheers!
@selmakucukler34953 жыл бұрын
Aradığım video buydu işte. Teşekkürler 😊🙏
@MentalyFeard3 жыл бұрын
sir may i please know what tool you are using to unscrew this?
@jonBS43 жыл бұрын
I'm assuming you're referring to the tool I used at the 2:05 mark, which are needle-nose pliers. You could also probably use tweezers just so long as it’s not too tight. Good luck!
@MentalyFeard3 жыл бұрын
@@jonBS4 yes, thank you
@zeebomb33853 жыл бұрын
After many rewindings, Got great instructions 😀 Thanks for sharing.
@jonBS43 жыл бұрын
Glad to hear you got something out of the video!
@zeebomb33853 жыл бұрын
why are you whispering!!!!
@jonBS43 жыл бұрын
I found there was a lot of echo in the bathroom with the stone tiles, so I didn’t want to speak too loudly. Turn up the volume and / or turn on closed captioning and my words should be clear enough.
@mauricewashington2263 жыл бұрын
Thanks for this!!
@vita49773 жыл бұрын
Thank u for posting, this helped 😁
@jonBS43 жыл бұрын
Thanks for the feedback Vita!
@jujubear14223 жыл бұрын
So awesome. Totally helped!!!
@emiliegurley88063 жыл бұрын
Thanks. I had no clue how to install it!
@emc75163 жыл бұрын
Thanks! Saved me lots of time!
@maturebro17763 жыл бұрын
Thank you for the video. I was having problems with the plate, bolt and nut. I am so happy that you stated to make sure "the nut is severely fastened to the bolt that runs through the plate'. I was able to complete this installation without any problems.
@jdollarthegreat3 жыл бұрын
Thank you sir, made it very easy for me.
@robbdevries72223 жыл бұрын
Does it work with a hollow door? Pulte low bid crap door to be exact? My worry is I’ll close it and pull the spring end straight out of the door.
@jonBS43 жыл бұрын
I’m not familiar with that door specifically, but every door I’ve ever looked at has some kind of solid core perimeter, otherwise it would be almost impossible to attach hinges or a lock set to it. If the door’s solid perimeter is especially narrow, I’d suggest marking up exactly where you need to place the magnetic cup first, but don’t attach it, and then work your way backwards to figure out where the wall mount needs to go. If all else fails, an expandable hollow wall core plug could probably be used on the door, but that would truly be a last resort.
@lindam34972 жыл бұрын
@@jonBS4 I also have a cheap hollow door which luckily is open on the bottom. I made it work by doing the following so the screws had something solid to screw into! Mark the general the area where the catch will go and remove door. I fit a small (3" x 3") piece of scrap wood inside the hollow part where I had marked it. Needed a shim to make it fit better. Then I used wood glue to attach the shim to the wood, and the wood to the hollow opening of the door. Once dried, put the door back up and followed the video instructions for marking and installing the catch. Worked great! By the way, great video - I had the same problem with separating the 2 pieces of the catch!
@jonBS42 жыл бұрын
@@lindam3497 It sounds like you figured out a good solution for your hollow door! I have never run across that kind of hollow door, let alone one that is open at the bottom.
@Jaytraveler23 жыл бұрын
This is the most clear and precise video yet, thank you
@craigmackenzie-haines70903 жыл бұрын
Just bought the same product, Very helpful video!! 5 star review, thank you for making this.
@jonBS43 жыл бұрын
Thanks for letting me know!
@irecruitfish74103 жыл бұрын
I installed everything correctly then of course when it comes to spinning the door stopper it doesn't go in all the way. I've installed several of these and a few seemed effective
@jonBS43 жыл бұрын
If you verified the final position of the screws on the wall in regards to the tightened stopper, then you should be able to tighten the stopper against the wall in the correct orientation. If you’re not able to get the required leverage with bare hands, then I’d suggest using a pair of locking pliers to tighten it down, but use something between the pliers and the stopper so as not to mar the finish of the stopper. I’d recommend a towel or old shirt. Good luck!
@irecruitfish74103 жыл бұрын
@@jonBS4 Yeah I see your point thank you very much but the issue is I twist and twist and then the thing is just loose and it's basically stuck on the wall It's as if the screw or something is stripped and I can't even remove it very odd not sure what happened
@jonBS43 жыл бұрын
@@irecruitfish7410 Sorry to hear that. Maybe the main bolt got cross threaded and that’s why it’s not loosening or tightening any further? If you think that’s the case, you could use a pry bar underneath the stopper and apply gentle pressure while trying to loosen it. That should allow you to remove it and replace it with a non damaged one.
@irecruitfish74103 жыл бұрын
@@jonBS4 yeah I can try that out...for now the loose ones function it just shakes quite a bit when it catches the door. Thanks for the responses. Helpful video overall!
@ta35803 жыл бұрын
Thanks now my mom can stop bothering me about the door
@michaelmarquez61333 жыл бұрын
Awesome thanks!! Yes easy enough but you explained well and now I don't have to mess with it
@redlion-o88553 жыл бұрын
Tweezers of course! Theres me trying to pry it out with a flathead. Thanks dude 👍
@dleblanc3 жыл бұрын
Came here for the same exact reason. Would have been great to come with some basic instructions.
@jdollarthegreat3 жыл бұрын
Me too smh
@yacovp66093 жыл бұрын
Hi Jon. Thanks for the video. I’ve just finished installing a new Dynavin on my e39 M5. My question to you is how do you set up the car’s clock now that the original unit is out?
@jonBS43 жыл бұрын
Hi Yacov, I’d first suggest checking the owner’s manual for your specific model unit on the Dynavin website. Here’s a link to mine: dynavin.com/images/PDF/n6_owners_manual.pdf As I recall, you need to go to System Settings > Time Zone. From there I believe it was just a case of offsetting the time adjustment in hours of where you are located compared to UTC (effectively a successor to Greenwich Mean Time). In Ontario, Canada that’s a UTC -05:00 adjustment.
@yacovp66093 жыл бұрын
Thanks for the video as it was very helpful for me. How did you manage to get the unit flush with the panel? I am in the process of installing a Dynavin N7 pro on my e39 M5 and the unit won’t go all the way in. I am missing like 5mm to push it all the way through. I check the cables behind and it’s not the problem. It seems that the frame of the unit is a little bit to big.
@jonBS43 жыл бұрын
I don’t know about the N7 pro specifically, as this install was for the N6, so there may be some differences between the two. As I recall, the antenna hookup on the back of the N6 was one part that caused me a lot of trouble. I disconnected everything at one point to see if the unit physically fit in the dash flush and then started attaching one connection at a time to see if it would still fit flush. It was very tight to get the antenna to attach and slide into the bracket and make room behind the unit for all the wires and connections. Good luck!
@BoStErO19054 жыл бұрын
I really hate using those plugs. Only 2 of them caught, the other one spins. I guess that's good enough. Thanks for the video!
@jonBS44 жыл бұрын
Those are definitely not the best wall plugs included with the kit.
@vintageknifeguy4414 жыл бұрын
Did you just screw into the door or use those green thingymabobs?
@jonBS44 жыл бұрын
The green wall plugs really only need to be used in drywall. Most doors will have some sort of interior reinforcement around the perimeter, so I just screwed directly into the door.
@liseraby31774 жыл бұрын
Cannot heat the man's boive just mumbling
@liseraby31774 жыл бұрын
Cannot hear the man's voice.
@jonBS44 жыл бұрын
@@liseraby3177 I would suggest you turn on the closed captioning if you can't hear or understand what is being said.
@16jnajm4 жыл бұрын
I’m curious why you can’t just cut the original head unit bracket instead of keeping it together and taking the whole dash apart around it. It’s probably going in the trash anyway right?
@jonBS44 жыл бұрын
You absolutely could cut the plastic, original head unit bracket, but you would still need to remove and / or loosen some of the dash panels to attach the new metal bracket and run the GPS antenna. At the time I did the install, I also wanted to save the original parts in case I wanted to go back to stock or sell the parts.
@John893755 жыл бұрын
Thanks for the vidoe! I was going to buy this stereo for my E39, after this video, am not :)
@jonBS45 жыл бұрын
Karib H I guess that’s good then!
@John893755 жыл бұрын
You made a clear and understandable video with good instructions for the installation. Thank you for the time you put in! What i meant before is" i dont have good knowledge about cars electricity, thats why im a bit afraid to do this"
@jonBS45 жыл бұрын
Karib H thanks for clarifying your comment! I didn’t have any prior experience doing this before either, so it’s not particularly challenging, it just takes a bit of patience. I tried to show as many of the steps as possible as I hadn’t found any how-to videos when I was doing it.
@ZEBEDENAS16 жыл бұрын
Where to get that radio bracket?
@jonBS46 жыл бұрын
Karolis Kaikaris the metal bracket came with the head unit when I bought it, I don’t know that it’s available for purchase separately.
@TheSRBgamer636 жыл бұрын
Awesome,all i missing is car and this Dynavin :D.
@jonBS46 жыл бұрын
I’m glad you liked it, but why did you bother sitting through my installation video then?
@John893755 жыл бұрын
hahahahah
@horacioparis54007 жыл бұрын
Hi! How do you conect the Steering wheel?
@jonBS47 жыл бұрын
At 11:55 in my video I mention connecting the CANBUS / IBUS interface box into the Dynavin harness and that's how the steering wheel controls are connected to the head unit.
@horacioparis54003 жыл бұрын
@@jonBS4 Hi friend. if I understand I saw the whole video until the end. But still, I can't get the steering wheel controls to work. Their Light turns on, but they don't respond. Also another thing that I noticed is that with the canbus connected I can't use the winks and I get high light on. Can you help me with this?
@jonBS43 жыл бұрын
@@horacioparis5400 I’m not sure which light you’re referring to. I don’t recall any lights on the CANBUS. Your original comment was from 3 years ago, was it working properly before now? Are you using the exact same Dynavin N6 unit?
@alcanhg7 жыл бұрын
Does the radio station show their logo?
@jonBS47 жыл бұрын
alcanhg no, the radio stations don't automatically broadcast that through this head unit. I chose to make radio station icons for my presets.