Upward RC - Isaac Smith

Пікірлер

@larryburrough7678 Ай бұрын

I bought this plane lol. It's sitting in my building

@waynemiller6070 Ай бұрын

I wish I had seen this before assembling my SW 67 laser. The build is almost identical but there was very little guidance. You did some things I wish I would have done. The maiden is this week! I'm pretty excited.

@larryburrough7678 2 ай бұрын

I need to know where to find the settings for transmitter for this plane. Having trouble finding what to set everything to as far as aleirons an elevator

@titusandrew946 2 ай бұрын

Do they come with these lights?

@aloccimaurizio4191 3 ай бұрын

Hi, thank you for your valuable video. I am not a 3D pilot, I carry out sport flights with some 3D figures. Could you tell me the recommended CG and the right excursions for low rate and high rate of this model? A thousand thanks. Maurice.

@alwaysflying6540 3 ай бұрын

I was getting worried that the plane was never coming out of the box lol

@alwaysflying6540 4 ай бұрын

You don't need to reset the esc they are programmed from factory. You need to calibrate your throttle so the esc can learn your throttle stick endpoints. It takes only a few minute's.

@lainechampion8255 4 ай бұрын

I’m still gonna get with you one day for some instruction if you’re willing?

@ElijahHolmanRC 4 ай бұрын

Awesome man! I'm working on my rolling harrier right now. Looks great!

@upwardrc 4 ай бұрын

Thank you! Yeah it takes a lot of practice!

@flyingfools47 4 ай бұрын

What covering iron are you using? Im havinf a hard time finding a good temperature controlled covering iron

@upwardrc 4 ай бұрын

This is what I’m using: a.co/d/6P2BRQi

@flyingfools47 4 ай бұрын

@@upwardrc thanks! I actually managed to find the exact same one an hour ago after some close examination of the few close up shots of the iron in the video and comparing it to pictures of ones on Amazon and I found the identical match! Apparently I'm a legendary detective 😂

@ElijahHolmanRC 4 ай бұрын

Those foamys look amazing!

@upwardrc 4 ай бұрын

They are nice for sure!

@747plane 4 ай бұрын

Dang, that’s a nice

@mrvariousstyle6546 4 ай бұрын

Thanks for the temp info.. I very much needed to know that for sure.

@upwardrc 4 ай бұрын

Glad it helped!

@nichollsboy11 4 ай бұрын

How do you like this one? Have you flown any other 39" models? Looking for my first and im considering this crack yak or the super extra L or the 40" cracked pitts

@upwardrc 4 ай бұрын

I love it. I have not flown the other 39 in models. You can’t go wrong with any of them.

@hkrep 6 ай бұрын

Nice overview, just got the SW Yak 54 PNP myself. Just very bad practice to calibrate/change ESC settings with the prop mounted! If people follow along, please don't follow that step and remove the prop first. These props on 6S will send you to the ER within a blink.

@upwardrc 4 ай бұрын

Yep totally agree. I should have done that. If you mess up and get the motor reversed or something with the prop on you will be in big trouble.

@zackriden79 7 ай бұрын

stop using apc props

@alwaysflying6540 4 ай бұрын

Why. I use apc without issue

@waynemiller6070 Ай бұрын

Personally I like APC props. And the laser I just got looks like it's APC but it isn't. It's a wood prop painted grey. Are you happier now?

@alwaysflying6540 Ай бұрын

@@waynemiller6070 lol

@AphexTwinII 7 ай бұрын

What iron is that?

@upwardrc 7 ай бұрын

Hi! It’s from Amazon. Here is the link: O'SKOOL Display Veneer Edge Banding Sealing Iron a.co/d/4V73dBc

@AphexTwinII 7 ай бұрын

@@upwardrc Awesome! TY!

7 ай бұрын

Nice! hey, what Expo do you have setup, those are huge throws

@upwardrc 7 ай бұрын

Thank you! I’m still experimenting to find the sweet spot for this plane. I normally start with 65 on Ailerons, 40 on rudder and 50 on Elevator. That said it really just depends on how you like it.

7 ай бұрын

Totally! all personal preference. I just want to know out of curiosity how others do it. Hope you post some video of the flights. Thank you

@upwardrc 7 ай бұрын

@ For sure. I hope to get some right videos out soon!

7 ай бұрын

Awesome!! happy holidays

@ElijahHolmanRC 7 ай бұрын

Nice video! I subscribed!

@upwardrc 7 ай бұрын

Awesome! Thanks man

@user-yw1zh3tn2f 7 ай бұрын

Could you make a video building up the plane? I’m thinking about buying the same so a video of building it would be great! Thank you! 😊

@upwardrc 7 ай бұрын

Yes. I have already recorded it. I just need to edit and post it.

@millerrc5829 7 ай бұрын

Nice plane it was a toss up between this and the yak and the yak won😂😂.

@upwardrc 7 ай бұрын

I’m sure the yak is a great plane as well. How do you like it?

@millerrc5829 7 ай бұрын

@@upwardrc it’s sweet I’ve never flown anything as locked in in the post stall category and the high Alfa KE is 🤯🤯 round cowl warriors 💪

@upwardrc 7 ай бұрын

@@millerrc5829 That’s awesome!

@skyboundrc 8 ай бұрын

Congrats on the plane! looks nice. The quick connects in the fuselage for the aileron servos is a nice touch. Looking forward to more videos!

@upwardrc 8 ай бұрын

Thanks Juan! Yes I love what they have done with the quick links. It make field assembly a breeze!

@waynemiller6070 Жыл бұрын

I don't think this plane hovers very easily. You do a great job. I have this plane, and I find it is a little bit Squirrley. I thought it was going to be one of my favorite airplanes. But it is not. My future is definitely bigger airplanes.

@sawyerheslep8493 Жыл бұрын

That's good shit right there!

@upwardrc 9 ай бұрын

Thank you!

@gisall8205 Жыл бұрын

I see that you have the EFLITE EXTRA 300 and the FLEX INNOVATIONS EXTRA 300. I have flown flat wing profile foams with some success. I want to get better at 3D in a smooth, slow, deliberate style. NOT blasting around, tearing up the entire sky. Out of the two airplanes, which one would you suggest. Right now, I'm not nearly the pilot that you are, but would like to advance my skills. Which airplane would you suggest as a next stepping stone to get to that point. Let me know please. THANKS.

@gisall8205 Жыл бұрын

Great video. I really want this airplane, but I'm hearing a few questionable things with it. I hear that in flight trimming is NOT possible due to the AURA 8 Stabilizer. also, I'm hearing that the motors go bed quickly on these airplanes. Can you tell me if these things are true. THANKS.

@Wilmer787 Жыл бұрын

Nice video! Which setup do you have on this one?

@tristanbradford99 Жыл бұрын

Really good flying dude. Im waiting to buy mine on craigslist and this is by far the best no bullshit video ive seen. I just wanna watch people rip this thing around! You fly like a very practiced person. nice work getting here.