mr longwood

Пікірлер

@Sybex82 Ай бұрын

But it's posible to use most parts 98-00 on an 96-97 but its little more work than normal👍🏽😅

@thehunter5316 11 ай бұрын

Have you used the key fob after this

@jordanhickman Жыл бұрын

Thanks for the video, doing this currently

@hyin7747 Жыл бұрын

Hey, so my Left windows functions perfetcly, but my passenger side windows recieves postive but does not ground, is there a dedicated ground for the passenger side windows ? if Yes, do you know where

@mrlongwood Жыл бұрын

Are your fuses in the right spots? I incorrectly pointed to the wrong ones in my video. There should be 20a fuses in slots 10 and 11, instead of 7 and 8.

@hyin7747 Жыл бұрын

@@mrlongwood yeah, the fuses are in the correct spots and are good. I just pulled the carpet again and Im trying to figure out what's going on.There are 2 cables for the passenger side motor, followed em both and they seem to be ok. Can't wrap my head around why it isn't grounding

@HybridPhase Жыл бұрын

so I just did this, the only thing working is the windows, but also, the floor harness and the plug it had 2 of the same color wires, blue and white , do you have any other videos of you installing it?

@ThePrelude1999 Жыл бұрын

Cool I'm thinking about doing this to my hatch but I got a question for you When I bought my hatch it was converted over to automatic it has a 96 front Harness Which deletes My rear wipers But I still have my back hatch Harness Is there a way that I can wire it up and have my rear wiper again? Would u know?

@mrlongwood Жыл бұрын

Your plugs might have spots for inserting the pins that the wiper wires would normally go in. You’d just have to pull some wires from another harness and pin them into your current harness. I mention which wires to use and where to put them into the plugs to keep the rear wiper. The harnesses I used weren’t from hatchbacks, but they still had the same plugs, just missing the wiper wires.

@ThePrelude1999 Жыл бұрын

@mr longwood OK I'll try that I do have a full interior front and back 5 speed hatchback harness from a 98 That I can put in but the only problem my car is automatic now I don't know if a mannual harness would work with an automatic do you think it would?

@CHICKENBUD Жыл бұрын

I have a floor harness and door harness from a 99-00 but my car is a 96-98. What changes do I have to make for it to work ?

@feedbacker9385 Ай бұрын

I am in the same situation! Did you do the swap? Very curious to know what needs to be done to make it work.

@hectorEK9 14 күн бұрын

Just the floor harness you need the 96-98

@jeremyhare9515 2 жыл бұрын

The fuses you pointed out say rear left and rear right on the fuse diagram that cannot be right

@realtor.vaarunan 2 жыл бұрын

Just did the full swap, and you’re right. Need to put the 20amp fuses in slot 10 and 11, not 7 and 8

@mrlongwood 2 жыл бұрын

You’re right. 10 and 11 are the correct ones. 6 isn’t anything even though i pointed it out haha. Looks like the ones I showed would be correct for 92-95 .

@bonbont6912 2 жыл бұрын

to make this installation easier! all ya have to do is run 3 wire of 16 gauge from passenger side relay switch color code (green/black, blue/yellow and blue/orange)to driver side relay switch wires color coded! and then connect from driver side ground (black) to ground and the wire from driver side (blue with black stripe and green with black stripe which is power positive wire) that need to goes to fuse box into the power window fuse number 24 with a 10 fuse! this is the easier and faster way...the way in the video is too much and not nessesary! just to save ya hella hours! if ya only want power window conversion! this is only for power window conversion and not the power door lock...