Hi bro, I watched your video and bought the diffusar and they are touching my muffler, any idea how to fix it?
@UnworthyMotors3 күн бұрын
@@EA7_MOB i had a similar issue, mine was only the slightest though right in the center. I reached out and they confirmed it would be fine. I did a long drive in the car and went down and touched the muffler in that center spot and it didn’t get hot enough in my opinion that it would melt anything, but overtime some discoloring will be noticeable. 1 thing i decided to do as just an extra precaution is i actually just did some exhaust heat wrap around the muffler itself just in the spot it touched, to help dissipate the heat even more where it came in contact
@EA7_MOB3 күн бұрын
@@UnworthyMotorsthanks for replying, but I was asking about the rattling, when I cold start it rattle on muffler it’s crazy, did you had same issues? If so how did you fix? 🤔
@UnworthyMotors3 күн бұрын
@@EA7_MOB same solution i just mentioned will help with the rattle
@RonMiki83 күн бұрын
Do these fitment rub your wheel wells?
@UnworthyMotors3 күн бұрын
@@RonMiki8 nope
@seijimrkts9 күн бұрын
Are there any California legal intakes? Thanks in advance
@UnworthyMotors9 күн бұрын
I’m not sure, California has some crazy restrictions
@seijimrkts9 күн бұрын
@ all good thank you
@cadong9269213 күн бұрын
Dry rot. Stainless steel hoses do not rot nor crank
@fastshuther16 күн бұрын
Fuck, should've gotten this one
@Go_toschool-o1t17 күн бұрын
Man yas marina blue is literally the best colour on the m4 😂 also are those bbs FI-Rs?
@UnworthyMotors17 күн бұрын
@Go_toschool-o1t i couldn’t agree more! And no they are Apex 5rs’s
@jamessok9967Ай бұрын
can you confirm if the mhd stage 2+ ots map only turns off 1 monitor??
@UnworthyMotorsАй бұрын
I’m not 100% sure, i never had any check engine light
@おん屋Ай бұрын
Hello! Sorry for my poor English. I would like to know the dimensions of the exhaust tip.
@UnworthyMotorsАй бұрын
Made by Arm Motorsports: 90mm
@おん屋Ай бұрын
@@UnworthyMotors thank you!
@ambrosegrehamАй бұрын
Don’t need to take wheel off to do this, just turn the wheel full lock to access one side at a time
@UnworthyMotorsАй бұрын
@@ambrosegreham i know that. I took it off to film it..
@ismaelsanchez65502 ай бұрын
What spoiler is that!!!!
@UnworthyMotors2 ай бұрын
Psm style is what it’s called
@Billy-zo9bk2 ай бұрын
Finally found someone that did their research!
@UnworthyMotors2 ай бұрын
@@Billy-zo9bk ayyy yes sir!
@dracco29542 ай бұрын
would this fix my low beam? mine went off not sure if you mentioned if this was low beam or high beam
@UnworthyMotors2 ай бұрын
@@dracco2954 well i can’t say if it will fix it because i don’t know what’s wrong with yours. This is a low beam. If your bulb went out then yes replacing the bulb would fix it
@dracco29542 ай бұрын
@@UnworthyMotors sounds good looks about the same i have a 2015 same headlights thank you !
@elias12082 ай бұрын
What's your opinion on the CTS charge cooler?
@UnworthyMotors2 ай бұрын
No complaints from my end. Will def not leak like the OEM is prone too
@kodai_fa52 ай бұрын
Have you tried using any rubber pucks to protect the pinch welds?
@UnworthyMotors2 ай бұрын
Yes, i 100% used those everytime
@kodai_fa52 ай бұрын
@UnworthyMotors any suggestions which ones to get? I guess the 3" diameter notched ones
@UnworthyMotors2 ай бұрын
@ sorry, not the slotted ones, I’m thinking of my other car. BMW has the luck adapters with a square block. Check my links in the description for jack pad adapter. They are for BMW’s. If you have a different car then yeah the slotted ones if you have exposed pinch welds. BMWs don’t
@kodai_fa52 ай бұрын
@@UnworthyMotors another comment said the saddle diameter is 3.25", so a 2.8" or 3" puck should fit. I just hate to lose any more of that 2.75" low-ness.
@KingJamie22292 ай бұрын
That Jack is stupid, And your friends are dumb.....😂 = (Owner of said Jack)
@Joeyz0883 ай бұрын
Does it help with short legs?
@UnworthyMotors2 ай бұрын
Nope
@SUNEXTools773 ай бұрын
So glad to hear you like the 6602LP Low Rider Service Jack! That is one of fan's favorites! Not only because of how low it is but also high it lifts! If you are looking for something lighter, check out our aluminum jack, the 6603AJ.
@UnworthyMotors3 ай бұрын
Thanks for the comment! I’ll have to check out the lighter weight version!
@Thatguy_F80M33 ай бұрын
So so far how is your car doing with these intakes ?
@UnworthyMotors3 ай бұрын
@@Thatguy_F80M3 just sold the car a few months ago, but they did amazing! 0 complaints
@Thatguy_F80M33 ай бұрын
Is it a problem if I keep them closed ? Even tho looking at it carefully it’s impossible to close it 😂
@UnworthyMotors3 ай бұрын
These are not able to be closed
@danimalmx34 ай бұрын
This is for all the dummies like me. I have a 2007 e90 335i with rain sensors. I tried every combination to do this on the plug that connects to the mirror. I got one combo to work but it stayed on all the time. So after some frustration and many hours I decided to try to tap into the rain sensor. It only has three wires. Red brown and white. Red to red black to brown and it worked perfectly. Starts up when key is turned on and powers down when the car is shut off.
@moneymusso65244 ай бұрын
so i need to buy 8 new 13mm bolts for the strut brace ? i cant just reuse them?
@UnworthyMotors4 ай бұрын
Brother whaaaat?
@EA7_MOBАй бұрын
??
@ewroldsen4 ай бұрын
I love those tires on any vehicle under 500hp. My E46 M3 with its 333hp handles like it’s on rails with those tires rain or shine 👍
@UnworthyMotors4 ай бұрын
Yes sir!!
@CarsWithKeav4 ай бұрын
I’ve been running these tires on Heidi my 335 and on my Daily X1 for years. I love them, but I don’t track or do mountain runs in my cars so no need for summer tires really for me. I would run them on my wife’s 440, but they don’t come in the tire size I need so I run Michelin Pilot as4+ on hers.
@UnworthyMotors4 ай бұрын
Yeah they are the perfect all around tire that seems to meet all needs for performance or sport+ set ups!
@hondata055 ай бұрын
What intakes are on that it sounds sick
@UnworthyMotors5 ай бұрын
CTS turbo intakes!
@hondata055 ай бұрын
What intakes are on that it sounds sick
@DabbinTaffy5 ай бұрын
Literally my favorite m4 diy person lol
@UnworthyMotors5 ай бұрын
You the real MvP for that comment! 🤙🏼
@Beamer_7075 ай бұрын
Lmfaooo
@CryptikzChannel5 ай бұрын
Do the badges have a 3d bulge to them
@UnworthyMotors5 ай бұрын
@@CryptikzChannel they are OEM badges from BMW that have the edges air brushed
@CryptikzChannel5 ай бұрын
@@UnworthyMotors so they have a nice smooth top just like OEM? They look different for some reason lol
@UnworthyMotors5 ай бұрын
@@CryptikzChannel yeah exact same as OEM. You wouldn’t be able to tell a difference outside of the black edges. But no there is no differences. They are OEM direct from BMW and the company paints the edges
@CryptikzChannel5 ай бұрын
@@UnworthyMotors thank you 😁
@UnworthyMotors5 ай бұрын
@@CryptikzChannel happy to help!
@grantvergottini56125 ай бұрын
Thank you, thank you, thank you. You showed how things work which helps to understand when taking things apart.
@ATPHoldings-r9c5 ай бұрын
Sorry if I overlooked it, but you have a link you can share to the part you used?
@UnworthyMotors5 ай бұрын
@@ATPHoldings-r9c multiple places sell it, but it’s the Insane Performance 2 pin, 1 piece crankhub
@walter25065 ай бұрын
Hello, I have a question: how do you clean these new filters? Thank you and best regards
@UnworthyMotors5 ай бұрын
@@walter2506 should be very infrequent cleanings, but these can just be sprayed out and then blow water out with air and ensure they are 100% dry before installing again
@walter25065 ай бұрын
@@UnworthyMotors Thank you very much for the quick answer, I have the same filter and I used the K & N cleaning set but I see that it is not necessary, thank you
@brofan1ty9356 ай бұрын
Hey man Did you get a check engine light from the downpipes or does mhd have an option to turn that off?
@UnworthyMotors6 ай бұрын
No check engine light! mhd takes care of that!
@KS-yh1oq7 ай бұрын
What do you think about a 2018 M4 F83 for $45k with 31k miles??
@UnworthyMotors7 ай бұрын
Solely based on those stats, it sounds inline with how it is here atleast on the east coast. The verts typically trend under the regular coupe though
@ironhand227 ай бұрын
How much harder is it to install with paddle shifters? I ordered the same steering wheel as you.
@UnworthyMotors7 ай бұрын
I don’t believe it’s much more work. Best way is to just take a picture of your stock wheel and how everything is configured before you start disconnecting wires and then just reference it as you move everything over
@ironhand227 ай бұрын
@@UnworthyMotors found your channel and it has been great. Do you still recommend getting the cts intake? Looking for more turbo sound
@UnworthyMotors7 ай бұрын
@@ironhand22 thank you so much! That really means a lot! And yes it’s great for sound. You won’t see any performance out of these being they are still just open box intakes but the sound is 10x better. Front mount intakes is the way I’d go if you want a performance benefit(very marginal)
@ThePatrickBateman697 ай бұрын
6:20 what stud kit are you referring to? whats the benefits and do you have a link?
@UnworthyMotors7 ай бұрын
I did a video on it, and the stud kit is already linked in the description
@ThePatrickBateman697 ай бұрын
@@UnworthyMotors thanks daddy
@diditiu39887 ай бұрын
Hi nice vid by the way. but anyway since Im new to this tuning stuff, so sorry in advance but I have to ask what do you mean by stage 2 tuned? can you please explain just a bit on that and what are the bolt ons did you change and upgraded to be considered stage 2 tuned?
@UnworthyMotors7 ай бұрын
Tuning software simply changes the internal settings that the DME and onboard computers have set to operate the motor at highest efficiency, when you add parts that create better cooling or allow better airflow through the exhaust, you have to program the car to know how to utilize those extra benefits that in return make the car perform better. There is a stage 1, stage 2 and stage 2+ tune with MHD that are basically just different levels of changes. In regards to the upgrades, go to my page, go to playlists, and then review the video i did on full bolt on upgrades.
@MichelLopez8 ай бұрын
What is Stage+ ? What is the difference Stage 2 vs Stage 2+
@UnworthyMotors7 ай бұрын
I believe it’s marginal boost psi differences. Not much at all
@jldp248 ай бұрын
You think its neccessary to lower your F82 with 20s?
@UnworthyMotors7 ай бұрын
It’s not necessary? I’m on 18’s
@protectork98318 ай бұрын
Is crank hub fixed in newer models
@UnworthyMotors8 ай бұрын
Doesn’t seem to be an issue on G8X
@protectork98318 ай бұрын
@@UnworthyMotorsG8x is 2020 and newer right now?
@gerardogalindo89438 ай бұрын
Do they require a tune of will the ecu learn? New to BMW, but my STi required a tune for intakes and I'm looking to possibly do intakes on my M4
@UnworthyMotors8 ай бұрын
All good! No tuning needed or anything. As long as you still have your MAF sensor you are good
@ThePatrickBateman698 ай бұрын
How have these held up after 2 years? Im about to do the swap myself but thought I'd ask in case your recommendation has changed for the brand.
@UnworthyMotors8 ай бұрын
Nope! They have been great!
@ThePatrickBateman698 ай бұрын
@@UnworthyMotors Cool I just ordered them I’ll update you in about a week how the install goes, are you on instagram by chance?
@UnworthyMotors8 ай бұрын
@@ThePatrickBateman69 sounds good! I hope all goes well! Yes! Under the same name
@davis29208 ай бұрын
@WhatsyourForte
@davis29208 ай бұрын
I don't see any link the boi James page??
@arturovazquez67778 ай бұрын
I got a 2017 m3 comp with executive package for 50k with 23k miles. Zero accidents. What do you think of this. I was looking for a 2018 but they were all high mileage (40-60k) going for about 53-60k.
@UnworthyMotors8 ай бұрын
That’s actually a good deal overall!
@ZeroEffortF828 ай бұрын
Ehh black wheels look like spares. These wheels look better in polished silver. Black hides all the details.
@UnworthyMotors8 ай бұрын
To each their own i guess!
@RobertSumaran8 ай бұрын
Is your garage door missing a tension spring....awesome jack
@UnworthyMotors8 ай бұрын
Nope! All accounted for
@Safsbmwlife8 ай бұрын
What type of bulb isit ds1?
@UnworthyMotors8 ай бұрын
A D1S. They are linked in the description i believe. Some models are running different bulbs, so just check your owners manual for your type
@Ayeep4o18 ай бұрын
I have a base m4 78k for sale, 2 accidents on the carfax but has been looked over for inspection and good to go. You think 36k is asking too much based on the history? The car runs amazing so I'm only taking a hit based on the history.
@UnworthyMotors8 ай бұрын
Hey, 100% i would say that’s too high. Base, higher mileage, and 2 accidents would have that in the low 30’s in my eyes. Clean title base models are currently going for anywhere between 36-43k ish, with around 50k miles. Every market is different so i can only speak to mine, but doesn’t hurt to try and get as much as possible! Can always come down on the price
@ThomasNappo9 ай бұрын
NICE...BUT WAY TO HEAVY..😂😂😂
@UnworthyMotors9 ай бұрын
It is soooo heavy 😂 def a permanent shop jack, it does not go far lol
@MuzzMan213 ай бұрын
@@UnworthyMotorsany recommendation for a light weight option that’s low pro
@UnworthyMotors3 ай бұрын
@@MuzzMan21 wouldn’t be as low but the harbor freight low profile one i believe is made of a lighter material, just might lose .75 inches in height