It's a worn out part and needs to be replaced about every 5 years!

Thank you. I just removed them on a brand new Cynergy Composit stock model. The only difference is that the dots on mine were facing inwards, so you couldn't see them when installed.

This video has saved me 4 years in a row. Thank you!!!!

I have a brand new a400 lite and have all of this problems, gun has been in italia on fix and nothing changed😑 Waited a one year to fix the gun and having the same issues, have very bad feeling about a400

And Browning told me I would have to take it to a gunsmith to have this done. Thank for the video.

Is it possible to do that on Browning B525 Game 1?

Great video thank you. I'm new to over under shotguns. Just bought a Cynergy CX. Love it. Have you seen any videos on cleaning and lubing this model?

Great video thank you. I have a Cynergy but yours is gorgeous. Custom?

Oisin should pay Ratso immediately

Brilliant been wondering if this was possible on my gun for the last 10yrs... Thank you.

Thanks for the video.

Did it help with the misfire problem?

Thank you for the information. I just purchased a used A400 with the blue receiver. I put a little more than 100 rounds through it at Keystone Sporting Clays. Thanks again for the video, well done sir!

The A400 Piston ring (the piece he bent putting the barrel/gas cylinder onto the end of the mag tube) is $23 from Coles or other reputable suppliers. You don’t need to replace the piston AND ring for $80+. In years of using A400’s I’ve never seen the firing pin retainer pin walk out of the bolt body, never heard of it happening outside of this video.

Thank you!!

Hey Phil I appreciate your video, I have an exact Browning Cynergy to that one but I'm having an issue with it where the trigger locks up as if the safety is applied and I have to open and close the gun before I can shoot, have you ever seen or heard of that before, please let me know I really need to get it fixed.

Thanks. Just what I was thinking about.

does this cause an issue causing the trigger not to function properly?

Great video. Saved me from sending my gun in to Beretta for repairs.Thank you!

Thanks so much. Your video was very helpful. My firing pins were terribly carbon-fouled, and I had no clue how to clean them before watching your video. Reattaching the rockers was much more difficult for me than it appears to have been for you. I had to use both hands to press the rockers against the strikers hard enough to depress the striker springs while my wife hammered the rocker pin home. Was I doing something wrong? I suspect the gun wasn't cocked when I disassembled it. If my gun had been cocked, would that have saved me from having to depress the striker spring?

Yes, excellent video. I have a related question. Do you have a video focusing on the safety slider/barrel selector? Thanks

Can you please show a full breakdown video on how you properly clean your cynergy? I just bought one and need to clean the gun from the factory oil. Thank you for the very informative videos thus far!

Great video. Right on both issues. I think Beretta design team did a pisspoor job on the little pin (and the even smaller washer) that hold the firing pin. It is a BAD design. Too fragile. Benelli has a similar design, but they use a much heftier pin which for me has lasted over a decade without any issues.

Thank you. Very helpful. I find flying hulls on the trap line very distracting. You might have mixed up the sides. I removed mine one at a time and labeled them.

Excellent video Phil. You saved me a trip to the gunsmith. Thank you.

Well, I think it’s fun to see the shells flying out. Thanks for showing tho

Very well done, thank you.

Respect, Sir. It helps a lot!

Great to know! Thanks!

So fallow the manufacturers advice who would have guessed

2:40 What's up with the sudden placement of blue tape????

Thanks for video. Can U play tell me why Browning stopped production of the cynergy. Great shotgun for sporting targets, may still be popular in Australia

What’s the benefit of doing this? I just keep my hand over the barrels and allow the cartridges to eject half way in to my hand and pull the rest out

Oh, linear hammers, travelling backwards. Interesting! And how are they cocked?

Is this an older Cynergy? Did it solve your problem?

any double fires after the change?

My clips came assembled with the dimples not showing, did thar change? Or did mine come assembled wrong?

At 12:29 where you put the C clip back on. I find that if you take a small screwdriver & push the pin back out to where the pin cut out is flush with the receiver, the C clip slides right in. Lay the clip on the receiver & gently push it back on to the pin. When the pin is pushed all the way in there is a small lip there that is causing issues getting it to pop back on. Great video thought, I could not find anyone to work on mine that won't take a month or more. This gave me the confidence to do it myself. J&P got the parts to me very quickly.

Wow thanks, I was wondering if this could be done!

Will this work on a Citori 725 as well? Is it the same mechanism?

Again great video and will not hesitate to perform this on my Cynergy. I'm curious, how many rounds did you have through your gun before it started having problems?

Beaucoup de problème chez Beretta !!! Je suis pas fun

What cynergy is that one ?

Thank you so much for the video🙏

Thanks for that, very handy tip that I will be doing tomorrow.

Thank you for this!

Thanks for the information! I had the same problems with the firing pin, I dismantled the gun and polished the firing pins cleaned gun action with spray on brake cleaner and q tips, oiled the gun and now it works fine.👍

Thanks for the video just bought a similar shotgun couple of days ago. My model is A400 Explor Novator 5+1

Not to sound like a skipping record but Great Video!!! Easy to follow, informative and clear picture. Started having misfires on lower barrel, light strikes, noticed firing pin tip didn't look normal. Another club member had same problem with his Cynergy with not even 500 rounds through it. Thanks!

Thanks for the vid. I'm just wondering if it Is it bad to close action/bolt release on a empty chamber? Just bought a a400 and I feel like I shouldn't do that as manual translates (English version) saying ease action close, gently or somethinglike that? Cheers