Great Training today w/ E2U. It was Awesome!!!! Great Products.
@Daveinet19 күн бұрын
I had someone put Urethane over my new epoxy floor. The Urethane had speckles in it, about 1 inch apart. I think it may have been air bubbles, as they stick up in the surface. If I sand them down, can I put another coating over it? I gave up on the floor contractor, as I'm not convinced they know what they are doing. Trying to figure out how to fix their mess.
@Epoxy2U19 күн бұрын
Hey there, when you have some time please reach out to our rep Ryan. His number is 480-937-8853. He's an expert and will be able to guide you through your options to fix the work your contractor provided.
@justinleemkuil15843 ай бұрын
I had a previous expoxy floor on a new garage. i wasn't happy wirh and used rustoleum recoat primer over it and then applied new epoxy, which did not bond correctly, and it was spread out like u mentioned. Can i use this method to prep the surface, or do i need to take it down to the original surface?
@Epoxy2U25 күн бұрын
Hi Justin, so sorry our original reply never came through. If the first coating is peeling off then it is best to take it down to the original surface first. This method is only when your old coating is already properly adhering to the surface.
@robhager87704 ай бұрын
Excellent training!
@ismadd19905 ай бұрын
May we please know what we're the components that you mixed and ratio of content of each part so that we can DIY on our own?
@Epoxiperu5 ай бұрын
Excelente!!
@RamonLucero-y4v7 ай бұрын
How do the stem walls dry ?
@Epoxy2U7 ай бұрын
We have a small hand held light that some guys will use to hit the stem walls with, but others choose to just polyaspartic the stem walls as it doesn't effect the customers ability to use the floor again right away.
@RamonLucero-y4v7 ай бұрын
Is it 100% UVR protected ??
@robhager87709 ай бұрын
Awesome system, could revolutionize the industry!
@mikekeller49111 ай бұрын
Killjoy was here!
@mikekeller49111 ай бұрын
Nice presentation Greg!!
@felixniyonsaba5650 Жыл бұрын
Good! And me I need training
@ChadwickSpence-c7v Жыл бұрын
Thank you for the help, had to redo a topcoat for lack of antislip recently.
@mandingan1 Жыл бұрын
terrible audio!
@Vippy_ Жыл бұрын
How will this affect my gun rights in Louisiana
@chrisr4601 Жыл бұрын
That’s crazy
@elbertschoen7714 Жыл бұрын
*Promo sm*
@chriscook6572 Жыл бұрын
What is the blue colored top coat being put down over the flakes?
@Epoxy2U Жыл бұрын
That is our brand new UV top coat. Cures instantly under a powerful UV light machine. The space is ready for full use again 30 minutes after applying the light. We will have more content on this product coming out soon.
@MysteryScienceGaming Жыл бұрын
Hello, thank you for this video. Do you know of any other product you guys sell that can poured directly over concrete that is a bit cheaper? I have a freshly poured 64 x 48 slab, no sealer, wasn't trowel finished. Is there anything else I could use without having to grind the concrete?
@Epoxy2U Жыл бұрын
Hello, we certainly have other products that can be used that are cheaper, however we CANNOT warranty any of our products if you aren't going to grind the concrete first. Without grinding the concrete the products just simply won't adhere to your surface properly and there's risk of something causing it to break off.
@ianzinn9172 Жыл бұрын
Greg is indeed the Grand Master of Epoxy. Mark, Greg, and Yuki are awesome and they make phenomenal products!
@stevehall492 Жыл бұрын
Great video. I haven’t used this product, but this really makes me want to!
@stevehall492 Жыл бұрын
Excellent! We’ve used both C components and love it. The finer product will even sand off. Amazing product. Thanks!
@stevehall492 Жыл бұрын
Great product. We’re very pleased with the results we’ve seen. Good intel on the components here. Thanks.
@stevehall492 Жыл бұрын
Excellent video! Great info.
@stevehall492 Жыл бұрын
Great video! Love to see more of these.
@TacoPete Жыл бұрын
How do you get the Polyaspartic to stop giving off the smell? It’s been a week already.
@Epoxy2U Жыл бұрын
Hi William, whether you use the Ultra Low Odor Version or the Regular Polyaspartic, there shouldn't be a smell after a couple of days. To best assist you, I recommend sending in your contact info to e2u.com/contact/. Our expert Greg Lamm will get in touch with you!
@johndagastino7900 Жыл бұрын
Top coat missing
@johnelwood3308 Жыл бұрын
Love this product always the most reliable choice.
@johnelwood3308 Жыл бұрын
Awesome
@victorycigarettes Жыл бұрын
Great video. I used this material for repairing and prepping floors. It does a great job on patching the shallow edges.
@markchambers74832 жыл бұрын
𝚙𝚛𝚘𝚖𝚘𝚜𝚖 😊
@andyaguirre93702 жыл бұрын
You forgot one more roller topcoat back to e2u
@johnelwood33082 жыл бұрын
Polyaspartic low Oder is amazing you don’t even smell it 👍
@johnelwood33082 жыл бұрын
Always great products from E2U
@bindiberry62802 жыл бұрын
It needs tests like walk, tires rolling, drag stuffs, leave out door under the hot sun ... on it and washing it ... etc. This is a good demo though.
@zenstox2 жыл бұрын
why didn't you open up that crack with a grinder first?
@produccionescaro2 жыл бұрын
Podria enviarme a Monterrey mexico
@joearaiza16032 жыл бұрын
Awesom
@md210423 жыл бұрын
Do you recommend a concrete primer before the 6150?
@md210423 жыл бұрын
After applying the Polyspartic top coat how long do you need to let it cure before parking cars and installing racks etc.? I just applied 6150 on Saturday and the top Coat polyspartic on Sunday. Let me know. I was going to let it cure for 7 days before parking cars on the surface. The coating is already very hard after 24 hours and looks terrific.
@namsoemmanson83383 жыл бұрын
Please what is the ratio used for your mixture?
@bostonppcnetwork3 жыл бұрын
you don't top coat that sand?
@piscinadeareia5493 жыл бұрын
Gostaria de trazer este produto para o Brasil
@arnedac93993 жыл бұрын
Really cool Love the music made the video sexy🤘
@royalafricanbeer19823 жыл бұрын
Am looking for chemical for outdoor concrete
@IFHSP23 жыл бұрын
Can I do this inside the cab of my truck? Or bed of truck, instead of Bedliner?
@TheCureThatKillz3 жыл бұрын
@:23 I’m going to start working in shoes like those. LOL