9 ай бұрын
10 ай бұрын
Пікірлер
@christianrahle8171 6 күн бұрын
Hello, could you please tell me if the skidplate fits to my brandnew 2024 CRF 1100 DCT Version standart model with 21‘‘ frontwheel
@axpracing 4 күн бұрын
It does ! :D
@christianrahle8171 4 күн бұрын
Thank you
@jjse79 17 күн бұрын
Do you have them for the same motorcycle but version 2024? Or this kit will fit the 2024 version?
@axpracing 14 күн бұрын
We actually don't have for a '24 . it seems that there are some change to bring on !.. so that's an unfortunate "no" for the moment. Sorry mate
@arnokonrad7464 18 күн бұрын
The rear Mount is too weak close near the round fittings, broke Both👎
@axpracing 17 күн бұрын
Hello, we have been noticed about this issue and redesigned the rear fixation to solve it. Do not hesitate to send an email to [email protected] so we can help you. Thank you 😉
@SeanFillner 29 күн бұрын
Back ordered, back ordered, back ordered back ordered back ordered.... When will it be in stock again> Gen 2 touring for 2024 790 adventure??
@axpracing 29 күн бұрын
In a way, we are glad to see that the skid plate is a victim of its own success 😉 We have several dealers in the US and recently sent new stocks. However, if you don’t want to wait for the dealers, the Touring skid plate is always available directly on our website: www.axp-racing.com/en/product/skid-plate-ktm-790-890-adventure-r-l-touring-gen-2-2019-2024-black-ax1737 Thanks!
@SeanFillner 29 күн бұрын
@@axpracing I placed my order at Rottweiler. Let's see what happens
@TheQQRYQ80 Ай бұрын
Hi I noticed that this is new design of your skid plate.. anything wrong with older design?
@axpracing Ай бұрын
Thanks for your question! We faced some issues with the previous model being stuck in the front fender. So we redesigned the upfront part of the skid plate to avoid any problem with it 😊
@TheQQRYQ80 Ай бұрын
@@axpracing Thanks for letting me know.. do you know online shop in UK where I can get this skid plate from?
@axpracing Ай бұрын
@@TheQQRYQ80 you can check the following websites: Race FX, Wrench ride and Dirt bike spec 😉
@fred-san Ай бұрын
OTYKEN
@luberi01 Ай бұрын
Compre el mio lo instale y la primer salida e partió en 2 nunca supe donde quedo el pedazo
@axpracing Ай бұрын
Hello, can you please send us an email to [email protected] with pictures of the broken part so we can examine it and find a solution to help you. Thanks and have a great day.
@stevenwigmore1805 Ай бұрын
Received mine today here in England absolutely excellent with no fitting issues excellent product well done Guys
@axpracing Ай бұрын
Thanks a lot for your feedback !
@tancredeprevost3755 Ай бұрын
Bonjour. Quid de la compatibilité avec le crash bar pour la pompe à eau ?
@axpracing Ай бұрын
Bonjour, Il y a deux sabots disponibles pour la Desert X, le premier est compatible avec les crash bars Hepco&Becker: kzbin.info/www/bejne/eYG6eXdmqMaDr9U Le second avec les crash bars SW Motech: kzbin.info/www/bejne/j5OuY4l8jsieoK8 Dans les deux cas, il n'y a pas de gêne au niveau de la pompe à eau. Pour tout les autres crash bars nous n'avons pas testé directement et nous ne pouvons donc rien garantir 😉
@micanzdablio2762 Ай бұрын
Wow!😍
@axpracing Ай бұрын
🙌
@julibachelet Ай бұрын
Hi, should I install the SW bars first or the skid plate first? Thanks.
@axpracing Ай бұрын
Hello, On the right side, you'll need to cut the spacers supplied by SW to make them compatible with the skid plate. And to answer your question, you need to install the skid plate, then the crash bars. If you need more details about the modifications, feel free to send an email to Xavier so he can help to [email protected]
@avec-zam7301 Ай бұрын
Bonjour, je suis très intéressé dans votre skidplate pour un voyage off-Road Maroc. Je suis entrain de monter une Tenere 700 world rally pour se voyage et je veut votre skid plate pour ca reputation, mais aussi les crash bar de chez outback motortek? Du coup vous parle d’un ajustage mais vous avez une idee plan ou autre ou voir meme une possibilité de l’acheter directement avec cette modification? Merci a vous et continuez comca!
@axpracing Ай бұрын
Merci pour votre message, vous pouvez envoyer un mail directement à Xavier pour qu'il vous fasse parvenir toutes les informations à [email protected] Merci!
@franzina1000 Ай бұрын
Fit with Head Pipe Header Collector ?
@axpracing Ай бұрын
If you have a T7 Euro4, this is the skid plate: www.axp-racing.com/en/product/yamaha-700-tenere-euro4-skid-plate-black-ax1564 And for the euro5, it's this one: www.axp-racing.com/en/product/yamaha-700-tenere-skid-plate-euro-5-black-ax1606
@franzina1000 Ай бұрын
@@axpracing of course, I know your products. I have some head pipes of Dominator. I need to know if the skid plate eu 4 fit with my collectors
@axpracing Ай бұрын
@@franzina1000 sorry for the misunderstanding 🙈 In this case, could you please send us an email (to [email protected]) with pictures of your collectors so we can see if it can fit with the skid plate or not. Thank you!
@powertrip1050 2 ай бұрын
yeah, I've got this on my Tuareg - awesome!! both the AXP plate and the Tuareg! 😃😃
@axpracing 2 ай бұрын
Thanks for your feedback ! Very happy to read that you like our products 😊
@XavierXRS 2 ай бұрын
ChatGPT Hello, Is there any issue with the high heat from the catalyst on the right side? Is the plastic not deformed or weakened over time?
@axpracing 2 ай бұрын
On the first units sold, the plastic tended to melt a bit, but we added a heat pad to avoid this problem and there isn’t any issue anymore 😉
@pedrosimoes6041 2 ай бұрын
hello, i have a question, if I buy only the skid plate, is it compatible with the OEM crash bars? the front side of the skid plate fixes on your crash bars. Will i be able to fix the front plate from the skid plate without your crashbars using the ducati ones? Thanks, best regards 👍👍
@axpracing 2 ай бұрын
Hi Pedro, we do not manufacture the crash bars but only the skid plate. To give eyou an answer, by fitting this one www.axp-racing.com/en/product/skid-plate-ducati-desert-x-2022-2023-to-fit-hepco-becker-crash-bars-black-ax1689 with OEM Ducati crash bars, there will be only a small contact, not a big deal. the best is to use hepco and becker crash bars with this one. If you order this one www.axp-racing.com/en/product/skid-plate-ducati-desert-x-2022-2023-to-fit-sw-motech-crash-bars-black-ax1679 with Ducati crash bars, you will have to cut the top part of the skid plate. The best still to use the SW Motech crash bars for this one. Feel free to send an e-mail for more info and pictures ;)
@trouty65 2 ай бұрын
Trying to fit this with my SW MOTECH CRASH BARS that it says are compatible but can’t see how this is going to work? The steel AXP bracket is flush fitting. How will that mount to the same mounting point as the SW Motech crash bars with the perfectly machined spacer that SW Motech supply with the bars that fits into the recess engine mounting point?? You works basically have to supply 2 correct sized spacers that fit 1 behind the bracket and 1 correctly sized spacer in front of the steel bracket to allow the bracket to fit correctly. Email sent guys hoping for a solution thanks.
@julibachelet Ай бұрын
Hi, were you able to fix this? Will install mine tomorrow. Thanks.
@TheQQRYQ80 Ай бұрын
@@julibacheletsuccess?
@julibachelet Ай бұрын
Yes. Had to cut the spacers though.
@HNNNGGG12 2 ай бұрын
Can confirm, nothing fits. cross threaded one of the front mounting points on the bike trying to fit this garbade. If you want a bash plate look elswhere.
@HNNNGGG12 2 ай бұрын
Can confirm, nothing fits. cross threaded one of the front mounting points on the bike trying to fit this garbade. If you want a bash plate look elswhere.
@HNNNGGG12 2 ай бұрын
Can confirm, nothing fits. cross threaded one of the front mounting points on the bike trying to fit this garbade. If you want a bash plate look elswhere.
@axpracing 2 ай бұрын
We agree that this fitment can be improved and we'll do at the first chance. Actually, this skid plate has been sold at +1500 units in 2023 and represents 97% of satisfied customers. It can be better yes but still good enough =)
@chriskuhl9961 Ай бұрын
I have this baseplate and it's amazing. 4 years and a hell of alot or rocks and still perfect apart from minor scratches.
@axpracing Ай бұрын
Thanks for your feedback @@chriskuhl9961 😊
@HNNNGGG12 2 ай бұрын
Can confirm, nothing fits. cross threaded one of the front mounting points on the bike trying to fit this garbade. If you want a bash plate look elswhere.
@CrawdaddyChris 2 ай бұрын
Ordered the touring skid plate before viewing this video. I’ll be returning the touring skid plate in exchange the Hard skid plate. My mistake for not watching the install videos first. I do not want to attach a skid plate to the engine case or give up ground clearance/add the additional weight of a center stand.
@axpracing 2 ай бұрын
Indeed, the hard version is the one you need then 😉
@evarboleda 2 ай бұрын
did you addressed the most common point of failure which is the breakage in the "weld" joint in the tank area
@axpracing 2 ай бұрын
On this new version, the welds have been modified and reinforced. However, we cannot certify that the welds won’t break, it depends a lot on the impact. In this case, the aim of the skid plate is to protect the fuel tank 😉
@leandrooliveira8307 2 ай бұрын
Nice piece, just a little ugly design why you dont do full close in the horn position? Looks bad that detail
@maxfautra3625 2 ай бұрын
Super! Si vous faites une v2 pour la Norden 901 je suis client.... car effectivement je n avais pas’pris à l époque à cause de’la pompe à essence trop exposée.
@axpracing 2 ай бұрын
Une nouvelle version du sabot pour la Norden n'est pas prévue pour le moment, mais ne jamais dire jamais 😉
@MrLittleseb31 2 ай бұрын
C’est une catastrophe cette vidéo
@ZarkLegendss 3 ай бұрын
quelqu'un aurait le diamètre et la longueur des vis ? je l'ai est perdu mdr
@axpracing 2 ай бұрын
il s'agit d'un diamètre 6 mais la longueur dépend des vis, n'hésitez pas à nous envoyer un mail à [email protected] pour que l'on puisse vous transmettre toutes les informations. Merci !
@ZarkLegendss 2 ай бұрын
@@axpracing merci beaucoup, oui je l’ai est déjà contacté j’attendais une réponse de leur part, merci
@antonioettorre5892 3 ай бұрын
It is compatible with the crosspro crash bar? Even the higher one
@axpracing 3 ай бұрын
We did not tried it ourselves, but one of our customers combined the skid plate with the crosspro crash bars, we can send pictures of the assembly if needed. Thanks and have a great day !
@antonioettorre5892 3 ай бұрын
@@axpracing yes, please send me the pictures
@axpracing 3 ай бұрын
@@antonioettorre5892 alright, no problem, can you please send a message to [email protected] so we can show you. Thanks
@larsihle9256 3 ай бұрын
Can the oil filter be changed wiithout removing the entire plate?
@axpracing 3 ай бұрын
No, the skid plate was designed to offer a maximum of protection so it needs to be removed for the oil filter change. Thanks and have a great day.
@Leviath5 3 ай бұрын
Un enfer à monter, la notice est vraiment à travailler.. 40min a galèrer, même si le résultat en vaut le coup ! Quel enfer de tout devoir deviner, je commençais à me demander si il y avait pas eu une erreur pour la visserie 🙄
@axpracing 3 ай бұрын
Bonjour. La notice indique clairement chaque référence de vis et il est précisé à chaque étape lesquelles utiliser. La notice est également accessible en ligne en couleur si besoin sur la page produit du sabot ainsi que la vidéo tuto.
@noControl556 3 ай бұрын
Nearly $400 skid plate and we have to cut out the foam ourselves? And really any of the hardware that doesn't need to be compacted for shipping should be installed as well
@axpracing 3 ай бұрын
Regarding the screws and bolts, we don’t know any brand that sells pre-assembled skid plates, no matter the price. And, it is clearly shown in all our videos that customers have to cut the foam themselves. The aim is for the customers to choose whether to stick the foam on the inside of the skid plate or directly on the tank; this way, we can satisfy (almost) everyone. Thank you.
@miliki2009 3 ай бұрын
Tenéis modelos para honda cr 250r 2003 ?
@axpracing 3 ай бұрын
Hello, No, we don't have any skid plate for Honda CR250R 2003. Thanks for your understanding.
@miliki2009 3 ай бұрын
Hola axp,ese cubrecarter vale para una honda cr250r 2003? O tenéis algún modelo para mi honda cr250r 2003 gracias
@axpracing 3 ай бұрын
Hello, No, we don't have any skid plate for Honda CR250R 2003. Thanks for your understanding.
@jimwallin9142 3 ай бұрын
I have installed mine on my 2021 KTM 890 Adventure S that has the KTM OEM center stand on it. I did not have to remove the center stand for the installation. I was able to do the install with the bike on the side stand with a bit more care. There were no glitches. It went very well with no bits or pieces left over. It does not interfere with anything on the bike during or after the installation. I am extremely impressed with how well this thing was put together and how clean the installation went. The installation document that came with the skid plate is thorough and easy to understand. I did watch the installation video a few times and it helped a great deal. Kudos to AXP. This is just what I wanted.
@axpracing 3 ай бұрын
Thanks a lot for your feedback ! We are glad to read that you did not face any issue with the installation. Now that everything’s set, you just have to enjoy the ride 😃
@LFDRT-France 3 ай бұрын
vraiment top j'attends le sabot pour la 1300 GS
@axpracing 3 ай бұрын
Le sabot de la 1300 GS est sur notre liste de développement 😉
@LFDRT-France 3 ай бұрын
@@axpracing y a plus qu'a attendre 🥳
@aaldaca 3 ай бұрын
It's garbage, it broke on the first fall and AXP doesn't respond to my emails or offer any kind of warranty.
@axpracing 3 ай бұрын
Your first e-mail is from April, the 2 . You got an answer the same day from me (Xavier) . Now I received your photos and invoice copy so I will answer to you this week. You have the GEN 1 and this video is about GEN2 which take in count the drawbacks of the GEN1 to transform in advantage on GEN2. As you haveGEN1, thank you to not have a garbage reaction on a different product you didn't use and offer us a bit of your patience, you're not alone and you'll have an answer + solution like all customers :)
@Revvedupadventureclub 3 ай бұрын
Even though this video was posted one month ago it is made for the old model skid plate, not the version 2 that just came out, weird
@axpracing 3 ай бұрын
This video is made for version 2 which came out at the beginning of March, you're just a bit late :D
@Revvedupadventureclub 3 ай бұрын
@@axpracing wow, I paid for a V2 and must have just received a V1 then because my brackets are totally different :(
@axpracing 3 ай бұрын
@@Revvedupadventureclub There are two types of V2 skid plates: HARD and TOURING. The touring version is compatible with the KTM center stand and the hard version is not. So they have 2 different fixation systems. If you don’t have the same brackets, it maybe is because you ordered the touring version instead of the hard one. Here is the link to the touring tutorial so you can see the fixations: kzbin.info/www/bejne/b5bUgWV5rZ5lmLc
@NMS.SuperDuper 3 ай бұрын
Hi. Does the standard 901 have the same hole pattern as the expedition?
@axpracing 3 ай бұрын
Hello, Thanks for your message. You can find all the information about fixation points, holes and pictures on this link: www.axp-racing.com/en/product/husqvarna-norden-901-hard-skid-plate-2022-2023-black-ax1622 I hope this will help you. Otherwise, feel free to explain a bit more your question by email to [email protected] Thanks !
@matlafalange1 3 ай бұрын
I really like your product but I never had so much trouble installing a skid plate. The front part with trying to align holes was a real pain in ……. Had to find longer bolt that i had that fit and get that bracket to align correctly. Im sure there is a easier way. Really good product, always had AXP skid plate on my bikes but this one is a real pain to install 🤷🏻♂️
@axpracing 3 ай бұрын
Hello, Thanks a lot for your feedback and loyalty towards our products ! Indeed, we received some comments about this issue with the screws length, so we replaced them with longer ones and did not receive any other comments since then 🙂 Have a great day!
@leeman20s98 3 ай бұрын
Will the radiator braces work with the 2024 YZ450FX GYTR Fan installed?
@axpracing 3 ай бұрын
No, unfortunatly they'll not..
@sergiograjles9123 3 ай бұрын
❤❤❤
@EdwinWeinstabl 4 ай бұрын
But how do I fit it with the centerstand?
@axpracing 4 ай бұрын
Hello, Thanks for your question. As you can see on the video, we don’t use the fixation points that are used by the KTM center stand. So you need to fix the center stand first and then you can add the skid plate using the aluminum fixations that are included in the box.
@NiKoNicou 4 ай бұрын
Un peu de sousou en plus ça fera pas de mal 😂 faut gratter à droite à gauche c sur
@jaymanneschmidt4732 4 ай бұрын
Brilliant. Having lived through paddling whitewater rivers in the days of alumnum canoes, I know first hand how much better plastic boats will slide over rocks. My question is how well will this skid plate work with aftermarket header pipes, such as the Akrapovic system?
@axpracing 4 ай бұрын
Hello, Thanks for your message ! Could you please send pictures of your exhaust system to this address: [email protected], so we can check the compatibility with the skid plate ? Thank you 😉
@mountainridevideos2749 4 ай бұрын
great! now thats there is option with ktm oem centerstand. Ordered!
@gillesgenete9598 4 ай бұрын
I have very positive experience with AXP skid plates. Had one on my former Husqvarna701E for 14.000km of offroad, mainly TET. Now AXP fitted to my KTM500EXCF for more offroad riding, already 7.000km. Lots of scratches and scars underneath assess how efficient they are. I used to have an aluminum skid plate on an AfricaTwin CRF1000L : great advantage to the AXP: lighter, resist to knocks without permanent deformation, dampens engine noise resonance and stones hits. I do recommend AXP skid plates, well engineered, easy to fit 👍
@axpracing 4 ай бұрын
Thanks a lot for your comment! Really nice to read that you're happy with our products !
@AdamCoffey828 4 ай бұрын
Will this work for the new 2024 radiators on 300rr?
@axpracing 4 ай бұрын
On the standard 300RR yes, if you have a racing model, it seems that radiators are different
@volvogt21 4 ай бұрын
I'm so happy I've just found a non alloy bash plate for my new Tuareg. My only suggestion is could you mark in some way the plate ( or colour code the bolts or cap screws) to identify what fasteners have to be undone to remove the bashplate for an oil change? It seems there are a lot that don't need to be undone. I can see my service guy undoing them all as he won't know how it is constructed and attached.
@fabienpics 4 ай бұрын
Wowwww Great 👍👍👍👍
@Thairider77 4 ай бұрын
Hi!Is this skid plate available now?
@axpracing 4 ай бұрын
Hello, Unfortunately, the development schedule still is very busy and the updated version of this skid plate is not available yet. Thanks for your understanding.