Gracias! 🤗

Thanks!

Thanks! 🤗

Gracias, pero no se popularizó mucho 😅

Gracias! 🤗

Si!

Hi @KansasPrint, I got mine from here s.click.aliexpress.com/e/_DCmoatl

Yes! Depending on what printer you had before, it's a game changer. I got an A1 now to make them work together. I'm sure you will like it 🤗

@Frikarte3D This one is actually my 1st. I do custom novelties & homegood. I thought this would be a great addition to my small business.

@@chitowntexan I hope it will be! Anything you need, just ask 🤗

@@Frikarte3D Thank you so much I sure will 🤗

Hi, yes I did the small multicolor parts with the A1 Mini and the big ones on another ones I have

You can record a timelapse using a Nebula Camera on this

Thanks for your feedback and spend time watching the video 🤗

I will try to look for videos before installing the Sonic Pad and see what I can find to try to compare. I'm also waiting to do speed tests with the High Flow Kit! I got the Sonic Pad and High Flow Kit with the rewards as a designer on Creality Cloud, but usually when I need spares and parts I buy from 3DJake, Aliexpress or Amazon.

@@Frikarte3D thank you, you are the best. And the link for the high flow hot end is not available anymore i found one on another website, I just wanted to make sure you know that.

Thanks, changed the link for a global one 🤗

@@Frikarte3D ❤️❤️❤️

My boxes are a remix of this one www.printables.com/model/39729-tool-box-parametric I fixed some mesh errors and improved some details like the corners, holes,... You can use that one or maybe I can upload a plain version of my fixed version.

I use the standard profile on Creality Print for the "Fast Cr10Smartpro" with a little tweaks on strenght, infill,... I tried Orca Slicer for multicolor in same layer, it worked mostly fine but have some layer shifting when it have lot of travels I think my accelerations are too high. Can share it also when I fixed it. Did you sent me an email?

@@Frikarte3D No, but I will, and share my profiles so far for pla / pla plus, PETG & TPU in cura, and PLA/Plus for Orca. Got good results for PLA, but not able to print PETG properly in Orca. I havent installed the high flow kit, but do have an upgraded nozzle, so differences should be max speeds and flow which arent fully optimized yet. I found that calibration in Orca is very easy (except PETG for some reason)

@@ShmulikPrimes I didn't tried PETG yet, only printed PLA and ABS for now

@@ShmulikPrimes what kind of nozzle are you using? And do you have a good profile for orca with sonic pad?

.

Thanks! It's beautiful model with beautiful filament 🤗

These are the detailed filament weight I used: White: 288g Lid+Base+Logo Inserts Black: 14g Creality Name+Latches Green: 18g Creality Logo+Handle Total: 320g

Per cambiare la ventola, se si dispone di un cavo abbastanza lungo da andare alla scheda o di un connettore intermedio, non è necessaria alcuna saldatura. Se lo allacci bene non sarebbe nemmeno necessario, ma serve per garantire che non si stacchi a causa del movimento. Tradotto con Google.

Hey! I didn't published that model because is a custom lamp I made under comission. Do you want it with that name?

Thanks for your feedback 🤗

I used this very cheap version, sound is crap but the look is good s.click.aliexpress.com/e/_DCmoatl

Gràcies!

Thanks!

Thanks! Gracias, esto no seria posible sin vuestros filamentos 😁

Thanks! Wait for the next one 😁

Yes! I think the same, thanks!

Thanks Dan! Love that pastel colors from Polymaker 🤯

Hey! Nice! I needed to buy them online, my hardware store didn't have the hex cap I wanted and made me pay an abusive shipment for them. So I ordered on AliExpress

I made this to fit my wife's phone. That organizer is at her desk's work space and she doesn't want to have it very visible. I have shorter versions prepared for the next expansion pack 🤗

Willing to see yours finished and your colour choice! 🙌🏻🙌🏻

I have mine inside, but also have a window in that room! Always open when using it

I made this with my old Ender 3 Pro, I don't remember because I made that timelapse test 2 years ago! Will try to find the logs somewhere and tell you! 🤗

@@Frikarte3D ok thanks

actually u dont need to its fine

A piston? 🤣

​@@Frikarte3D uhu and crank shaft and engine block

Nice! Willing to see it! 🤯

Yeah! I have an small collection of Star Wars things, I will try to design something for the 4th of May 😊

I barely print at 600mm/s only for testing, I normally print at 300 and the quality is very good!

Hahaha, I try to post "normal" videos, not shorts on Fridays

The K1 has a good build volume, but I have it next the V1 and it seems smaller. Will measure and tell you.

They will release K2 Plus soon, I assume K1 and variants will lower it's price, and if you have a V1, that's a totally other game! Also using my V1 sometimes, I love the style of the printer and use for ABS 🤗

Not the helmet, not too good at sanding or painting yet. Bookend do you mean the ingots holder?

@@Frikarte3Dthat’s what it is, looked a lot like a bookend to me😂😂. Yes I do mean that!

@@Thor4Mayor Yes, that's of my first remixed models! There's also another printed thing but it's very hard to see it

Custom orders are the best, a unique lamp is with his owner now 🤗

Thanks!

Haha 😂

Yes! Turned out great, I would prefer that change rotated in the front

Yes, actually I have running a Cr10 Smart Pro, the Sermoon V1 Pro (mostly using it for ABS) and the K1. Also have my first printer, an Ender 3 Pro, under the desk because is giving me some motherboard issues.

@@Frikarte3D ye ive subed and u have more than me i only have one witch is the sermoon v1

@@TayMcnay I have no space for more but I would like to have more

Ye same I have no space in my room it's so small

Nice! I think the only difference is the in-built camera and the pause when open the door! I like it's aesthetics and now using mostly for ABS as being a closed 🤗

Ye works the same

I used fusion 360.u??

@@TayMcnay I normally use SketchUp, but for the flexis I do them with TinkerCAD because is more time efficient. Need to learn how to use Fusion 360

Ye I did see tinker I'll give it a go I've made a head phone stand and pack man on fusion 360,thanks I'll Give It a go

You can find it on Amazon or at Aliexpress where I get it s.click.aliexpress.com/e/_DE1rttf