I am so happy for you! It is such a great feeling to make your own clothes and wear them. Enjoy, it is so much fun!

I was thinking the same as you as when you launder the finished piece it would fray. It doesn’t look professionally finished as it is there. I certainly wouldn’t be happy with that at all and neither would my customer

Hi! Thank you for your question. If you wanted to put the name next to your embroidery file, you could rotate your hoop, orientation, or you could rotate your embroidery font and rotate the embroidery picture file. I am not certain if this type of capability is available in the free version or not. I hope this helps!

Hello! I checked mine out and I do not see any thing that allows it to be locked in place.

Hello! I have used cotton to line the vinyl. Sew it down with just a straight stitch. I also use the free stop liquid on the edges. It seems to hold up well.

Lol! You can do it!! It's not hard 😊

It was for her school uniform. Everyone had to buy the same one.

I hope it goes well for you! Let us know. I love Upcycling!

Hello! Thank you for your question. Yes they do have some graphics that are available for your use on Merrowly.

Hi! Thank you for your comment! I am not familiar with the Brother V3. It is not sold in my country. It looks like a very nice machine. The MB 4 is a four needle machine and the Brother V3 is a one needle machine. I do have a brother, PE 800. It is a good machine with a 5” x 7” embroidery area. It has been very reliable.

@@sewingwithmaryrose thanks a lot

@@urmigadhvi3228 You’re welcome!

Hello! Thanks for your question. No, I did not create a pattern piece. Perhaps in the future, I may be able to. If I do, I will respond to this message.

So sorry! I checked it and fixed it. I bought this one. This is the one from my videos. I will go back and change it in all of my videos. Thanks for letting me know! amzn.to/3oSvXiT

Hello! Yes, you are able to lengthen the torso up to approximately 2” longer but not shorter on the small/medium Singer 150 dress form. When you are on the inside of the form, there is a while pole that extends from the neck down through the center of the form. At the end of the white pole, there is a pink plastic overlay with 3 notches with a red adjusting handle over the pink plastic overlay with 3 notches with spaces for the notches to catch on. You need to move / turn the red adjusting handle to move up the notches to increase the length of the torso. Be very careful when adjusting it. I suggest putting it in a sofa or bed. It’s not easy and it takes a bit of muscle to adjust it.

@@sewingwithmaryrose Thank you, I've got it all adjusted except for the neck and I still have to raise it 2cm for the height but it's all pretty exact right now. I'm just 5'2 inches.

@@oskarmolly That’s great! I’m so happy for you!

i can't figure this out either! :(

It took a teenage to get mine done correct. I'm still not sure how he did it but it fits me perfect. @@bethallen3350

I will do that on another video! Thanks for the suggestion!

Hello! You could tape the bottom bar and then tape the top bar to the bottom bar to prevent it from slipping down. You could use wide packing tape so it will hold up. I hope this helps.

Hi! You could try putting a rubber band right below the area on the pole you want it to stay and tape it with wide clear tape so that the tape is on the top and bottom and covers the tape. I hope that works for you.

No, I left the slit and pocket as is and I tapered the waist and trimmed down the arm holes. 😊

Thanks for your comment!

Hello! Thanks for your question! I use the MB4 size.

Hello Hope! Yes, I will get that out in the next couple of weeks and send you the link. Thanks for your comment. 😊

Thanks for your comment! I will work on making sure the audio is better in future videos.

@@sewingwithmaryrose Thank you I really need this information and I just can not find it on the Ytube I was excited to find you and then I just could not hear it, I hope you don't think I was being ugly. I was just letting you know. Have an awesome day.

@@1954evelyn No offense taken! I hope I had my close captioning on that video. When I get to a computer I will double check and make sure that it is on for this video and all of my other videos. I hope it is helpful for you. I really do love my dress form. You just have to be very careful with it and open each section a little at a time so it does not break. The plastic is on the lightweight side but it has been very durable for me.

Tape Measure Body Measuring Tape... www.amazon.com/dp/B085XP7GPH?ref=ppx_pop_mob_ap_share

Which embroidery machine from brother do you have?

@@sewingwithmaryrose i have the Brother Quattro and the NQ1700E. I also have the 8200 pacesetter...it id old but still works.

@@barbarameehan113 it’s always nice to have a back up machine. Sometimes I have all three of my embroidery machines going at the same time. The brother machines have all been very reliable for me.

I’m so glad your granddaughter loves the bag and the machine! I can’t wait to start teaching my 5 year old! Thanks for your comment!

Thank you, you are welcome. Hope you enjoy the machine as well.

There is a pole inside with a tightening screw to raise it up or down. Thank you for your question!

Hi Valerie! Thank you so much for your question. I have this video that shows you how to load a design onto your USB stick. How to Use Embrilliance Essentials with Text Lettering Tutorial for Beginners kzbin.info/www/bejne/hJenZq1rhM2nqrM I hope this helps!

Thank you! Glad you liked the video. ☺️

@UCLPT69sPFifxRpj-DX7oxUA thank you!😊

The Merrowly program automatically uses a patch edge. If you wanted to do a satin stitch edge, you could create that without Merrowly by just using Embrillance Stitch artist. There are 3 levels of stitch artist. I could make a future video on how to make a patch with satin stitch edge 😊. Thanks for your comment!! With Merrowly, you may be able to remove the patch edge and replace it with a satin stitch. I will have to try it!!

You’re welcome ☺️

Thanks for the feedback! I will do more patch making videos in the future. I recently upgraded to stitch artist 3, so I will be able to more with Merrowly. I will definitely do more videos on this topic 😊

Hi Mario! Thanks for your question. If you put a piece of masking or painter’s tape where you want the design to be that will be your target. You could lower the needle to make sure that the design is exactly where you want it to be. In the future, I may create another video to show how I did that.

@@sewingwithmaryrose please do because when I try and lower the design it looks as if it will hit the hoop when I do the trace

@@supakilla25 It’s scary! It’s good that you checked before you started! Thank you for subscribing!