Good job and project thx for sharing Hope you are doing well and hope to see longer videos and builds God Bless
@Woodcraft7162 ай бұрын
Thank you Larry. I'm hoping to start up again soon. It has be a fairly busy time for me right now. Thanks for taking the time to comment. God Bless you as well.
@larrystone57492 ай бұрын
Thx
@TheFarmerAndAdele3 ай бұрын
Watched three videos on this topic. This is only one of the three that had it ALL. Best looking chain too!
@Woodcraft7163 ай бұрын
Thank you very much. I've always had a great deal of respect for someone who can hand carve one. I'm glad it was helpful. Thanks for watching and taking the time to comment. I really appreciate that.
@geofferyhess96764 ай бұрын
awesome project...thanks for sharing. BTW what did you use for the screws??
@Woodcraft7164 ай бұрын
Cool Geoffery, I'm glad you got something out of it. I believe I used 1 5/8 outdoor screws. Some kind of coating. Thanks for watching and taking the time to comment. 👍
@user-tv6em9eg2z4 ай бұрын
My Dad made 2 of these with his pocket knife. One had a 4 post box at the end with little balls whittled out inside this box.
@Woodcraft7164 ай бұрын
Thats fantastic. I knowit started out as a hand carving design. I can't even imagine how long that would take. Thanks for watching and taking the time to comment. 👍
@pteddie69654 ай бұрын
Still missing your videos and commentary, Mike. God bless you and your family.
@Woodcraft7164 ай бұрын
Thank you PTEddie. I'm missing all the comments and back and forth. I hope you're doing well. I'd like to make some more videos. God bless you and yours as well. Thanks for reaching out. Great to hear from you.
@edforChrist4 ай бұрын
What a great review! Thanks so much. I really liked your improvisation to make this a sturdy and rigid tool. Great message at the end too. Thanks!
@Woodcraft7164 ай бұрын
Thank you Ed. I'm glad it was helpful. Thanks for watching and taking the time to comment. 👍
@edkinsel35534 ай бұрын
Thanks! New subscriber.
@Woodcraft7164 ай бұрын
Thanks Ed. Welcome. Glad to have you along for the ride. I have taken a break for a while, but I plan on posting some videos soon. Thanks for watching and taking the time to comment. I appreciate that.
@timnevinger50564 ай бұрын
Great video! Band saws are my favorite machines by far! I have a Craftsman tilt head that I put a Carter stabalizer on. I scroll and sculpt toys, puzzles, letters you name it. A 1/8th 14 TPI blade with the stabalizer is so versitle that I call it the worlds largest scroll saw lol. I keep a second standard model craftsmen for thicker cuts. They do everything that I need. Neither are the smoothest resawers in the world at all but I also have a planer and jointer so that takes care of that in about 3 minutes.
@Woodcraft7164 ай бұрын
Thank you Tim, I made this video about 2 years ago. I have learned so much more in the last few years. I think I have a tendency to favor the "new tools" I've purchased. I still think it's a good band saw for the money. I can really appreciate the setup you ate using. Sounds like an excellent use of both tools. I love the idea of a giant scroll saw. Thank you for watching and taking the time to comment. I really appreciate that.
@LYTOMIZE_Woodshop5 ай бұрын
I miss you, Sir - I hope all is better with you and yours! 👊
@ForbiddTV5 ай бұрын
Does the table tilt to make angle cuts?
@Woodcraft7165 ай бұрын
Yes, it does tilt for angel cuts.
@chefmittens30565 ай бұрын
Awesòme. Thnx!
@Woodcraft7165 ай бұрын
Your welcome. Hopefully this helps.
@nyjets536 ай бұрын
Massca - how do line it up, where are the scribe - line up lines
@eddiehosty66576 ай бұрын
Brilliant video, i was googling how to carve out a figure eight knot, and your video has been a super great help to me. Your step by step process and your end clip @ 6min, showing the different stages is so easy to follow. The tip about cutting along the sides is a great and ill be certainly doing this. thanks again
@Woodcraft7166 ай бұрын
Thanks so much Eddie. The video hasn't preformed as I originally had hoped. But I'm glad it was a help to you. If you don't mind, please send me a picture of your project at [email protected] I would realy like to see it. Best of luck, and stay safe.
@Firefighter19976 ай бұрын
How many 1x10 and tongue and groove boards do you use for each planter
@Woodcraft7166 ай бұрын
I used 2=1x10x8' and cut into strips. I used 5= toung and groove. thanks for watching.
@greatgrandpaswoodworking6 ай бұрын
I like this and has given me an idea. Too bad I can share it with you when done.
@Woodcraft7166 ай бұрын
Thank you great gramps. This one oneof my first videos. You absolutely can share with me. [email protected] I'd love to see your project when you're ready.
@albertdawson68147 ай бұрын
Thank you for sharing
@Woodcraft7167 ай бұрын
Thank you Albert.
@mikebarstow8557 ай бұрын
Great idea. I’m going to do the same to my project. Thanks and keep it up.
@Woodcraft7167 ай бұрын
Thanks Mike. I use primarily construction grade wood. So movement is always a concern. Never want to sell a project that wobbles when the customer gets home. Small price to pay for a quality product. I also mention it whenever a new customer calls. "I use adjustable felt padded feet to protect any floor " something like that. Thanks for the comment. I appreciate that.
@wendyrettig63327 ай бұрын
Hello! I would like to make your planter boxes, could you tell me the lumber I would need for the small planter boxes? Thank you!
@mikeschlop26057 ай бұрын
thanks , just what i needed!!
@Woodcraft7167 ай бұрын
Thanks Mike. 👍 hope it was helpful.
@snteevveetns7 ай бұрын
Great video
@Woodcraft7167 ай бұрын
Thank you @snteevveetns. I hope it was helpful. Thanks for watching and taking the time to comment. I appreciate that.
@user-rr2wm1zy3s7 ай бұрын
Do not understand your mounting issue. If you are mounting it with the wings there are 2 holes in each wing attachment piece to mount to a board. Not only does this work, it has the advantage of allowing you to remove the main unit by sliding it free of the plastic mounts and use it with the clamp without the wings. Lots of time spent talking about a misunderstanding on your part, not an issue with Kreg's design. Also, slopiness in the wings is overcome by screwing them down, but as far a repeatable accuracy, I don't use pocket holes requiring that level of accuracy and am not sure I ever will. So far the stop on the wing has worked fine. Othe rthan those two issues, useful review, thank you.
@Woodcraft7167 ай бұрын
Right on. Thanks for the comment. I made this video literally the day I received my pre-order 720. I've been told over the last year about my mistake in mounting. Originally, I thought you screwed the jig body down. After it was brought to my attention that it was an eyelet for mounting screws, and the jig slides on and off. That's when it all made sense. Also, as far as the repeatability with the side stop. I haven't used it either. Again, I was trying to be thorough with a new tool. I guess I had rushed to bethe first to get the video out. I always admit when I am wrong. No exception here. Thanks for watching and taking the time to comment.
@jamesmccormack51047 ай бұрын
Excellent video my friend thank you for helping me make my decision!
@Woodcraft7167 ай бұрын
Thank you James. I'm glad it helps. Thanks for watching and taking the time to comment. 👍
@joegallant22528 ай бұрын
Great Job and easy to follow directions
@Woodcraft7167 ай бұрын
Thank you Joe. I'm sorry it took so long to respond, I just saw your comment today.
@user-vz9ub2ic3w8 ай бұрын
I’d buy the M2 because of its durability unless I were making cabinets, then I’d buy the 720 because of the closer two-pocket holes option the other two don’t have. I would have liked to see the pocket holes cut into different materials other than construction lumber. I’ve heard the 720 makes the cleanest, splinter-free pocket holes because it clamps tight with downward pressure as well. Thank you for the video!
@user-rr4gt4zl4e8 ай бұрын
I also went with the Armor tool.
@jewdd19899 ай бұрын
I’m looking for a bandsaw, one that’s versatile meaning I can resaw stock, make electric guitar blanks, table legs with complex angles and tapers, etc. I’m so scared to commit to anything that wouldn’t be able to do all those things but I obviously can’t afford a jet or really $800 and up is pushing it for me. I’ve bought cheap tools in the past only to wind up getting the bigger better ones and I don’t want to make that mistake here. I’m not professional but would hope to one day be able to make money off of all this investment. Would this bandsaw be versatile and powerful enough to be worth the investment?
@timnevinger50564 ай бұрын
Hello. So there is more than one way to look at this. For example I own two band saws and neither are "considered" to be great bandsaws like a big JET etc. Both are old Craftsman. One is a tilt head single speed and the other is a standard model. Both are 12". Both take an 80" blade so all my blades are interchangeable which is one of the primary reasons I have gone this route so far. Another reason is that I upgraded the tilt head with a carter stabalizer and I use it for scrolling cuts. Let me tell you it is awesome! The tilt head option is also awesome and unique. I keep a half inch 3 TPI blade on the other one for bigger cuts. I have resawn 2x6 stock on both saws. I have zero need to go bigger. Having the two set up for different guides and cuts is an invaluable time saver on switching guides and blades. The combined total I spent to purchase both saws was about a whopping $100. You can definetly find these saws for $50-100 a piece and even less. I scowered FB market place then picked and negotiated great deals. The standard model saw came with more than 20 blades. I put new tires on both and tacked them down with hair spray. Everyday I turn my band saws on and get to work is a really good day. I have also seen 14" central machinery bandsaws listed for $100. There is a learning curve with bandsaws but its worth it! Theres also lots of great info videos on bandsaws like this one on youtube. I hope this encourages you!
@KWayne67569 ай бұрын
You quit??
@rogertulk86079 ай бұрын
I am planning to get one of these when the weather warms up a bit. I had a bandsaw previously and I found i used it on every project.
@photog15299 ай бұрын
Been using a Kreg K5 for many years. One feature I like about it is that it has two storage compartments that slide into dovetails on the drilling base that also function as support extensions for longer material. I keep the standard drill bits and related items in one compartment, and the micro bit in the other. I wish it had the locking mechanism of the 720. If you do a lot of face frames, the drill spacing on the Kreg makes its simple. If the Massca had this feature (don't see why Massca can't modify a future model) I'd replace my K5 with the Massca. One drawback to all it seems is the screw length for what passes as 3/4 plywood nowadays...always need to jack with the stop collar setting to keep the screw from popping through the backside of the material...reat PITA.
@bennettjoyce170711 ай бұрын
Wow is it easy to do without any power tools?
@Woodcraft71611 ай бұрын
The procedure is the same. But the time.... the time it would take to do it by hand. I can only imagine. But we'll worthwhile. Thanks for watching and taking the time to comment. 👍
@jewdd1989 Жыл бұрын
I can’t find any smaller than these, I want to taper my bathroom vanity legs but my contractor asked me to install feet levelers just incase the floor is wonky and I want whatever leg leveler recessed or hidden but I can’t find any that are small enough and tough enough because this vanity will have a solid quartz top so I may have to give up on tapered legs
@p-wood Жыл бұрын
Отлично! ❤
@Woodcraft716 Жыл бұрын
Thank you.
@charlesdpetrone941 Жыл бұрын
Good review but you dialog is a little hard to hear over the music. Suggest you delete the music. Thanks.
@joshwages4223 Жыл бұрын
Hit the nail on the head with the directions I’m in the middle of assembling mine
@Woodcraft716 Жыл бұрын
I hope your saw assembly went as well as could be expected. Lol. I hope this video helps a little. It's probably over a year old. But hopefully still has value. Thanks for watching and taking the time to comment. 👍
@MPjdog Жыл бұрын
You are correct on the gloves!
@Woodcraft716 Жыл бұрын
For sure, I've seen too many accidents wearing gloves. Thanks for watching and taking the time to comment.
@joetria6904 Жыл бұрын
I agree with your decision
@Woodcraft716 Жыл бұрын
Thanks Joe. Thanks for watching and taking the time to comment. 👍
@tomhostetter8516 Жыл бұрын
Nice Mike... missed ya brother hope your well?
@Woodcraft716 Жыл бұрын
Thanks Tom. Just getting back into it again. Great to hear from you. Hope all is well on your end.
@junioruncle4378 Жыл бұрын
Thanks for sharing your knowledge with your audience. Not only are you a skilled carpenter but also a great teacher. Keep up the great work. 👍
@Woodcraft716 Жыл бұрын
Thank you very much, Uncle Sam Jr. I really appreciate that. Thanks for watching and taking the time to comment. Thats awesome.
@RYwoodview Жыл бұрын
Love the music! What is it?
@Woodcraft716 Жыл бұрын
Thanks RY. It's the Electric Light Orcastra. I think it's called "Mr Blue Sky "
@donaldjones4693 Жыл бұрын
Like your shorts but would love to see a full build
@Woodcraft716 Жыл бұрын
Thank you Donald, I'm trying to put together some longer build videos. This was a Saturday afternoon little project. Thanks for watching and taking the time to comment.
@DT-qm6ll Жыл бұрын
I have what my be a very dumb question. Lets say you are attaching a 2"x4" to a 3/4" piece of plywood. Which piece to you measure with the calipar?
@Woodcraft716 Жыл бұрын
Good question. After running out and looking at it. I would say to set it up for the thinner material and also drill into the 3/4" piece. That way, you can't accidentally drill too big of a hole. And you can drill 3/4" into any size board. It will still attach with the proper screws. I hope that answers your question. Thanks for watching and taking the time to comment 👍
@DT-qm6ll Жыл бұрын
@@Woodcraft716 I enjoy your channel and will try that. But I do need to drill the 2"x4" and screw into the plywood. I can't reverse it.
@Woodcraft716 Жыл бұрын
@DT-qm6ll absolutely you can reverse it. Thank for the compliment. Let me know how it works out for you.
@kuehnel16 Жыл бұрын
Not paying 150 bucks for it
@Woodcraft716 Жыл бұрын
I agree, it is not worth $150. Thanks for watching and taking the time to comment. 👍
@jpcreativeimagery Жыл бұрын
Love the dust collection of the Massca even in portable mode! I hadn't realized and it's super lame that Kreg removed the dual functionality of the pocket-hole jig like the k4 and k5 had, that were also seemingly built much better. I have the k4 and the k5 fixed any of the issues with the k4 and this new one just appears to be such a step backwards. They massively downgraded from the k5. A lot of their crap is just that, cheap crap now.
@Woodcraft716 Жыл бұрын
Thank you JP. I still find myself using all three pocket hole jigs from time to time. But, I think Massca Products are built superior to the others. Although I've never owned the K5. But I hear is built to last as well. Thanks for taking the time to comment. I really appreciate that.
@jpcreativeimagery Жыл бұрын
@@Woodcraft716 thanks for the straightforward comparison, it was well considered!
@randymartin2396 Жыл бұрын
I agree with you
@Woodcraft716 Жыл бұрын
Thanks RandyMartin. 👍
@dar7771 Жыл бұрын
Thank you for the review. It’s funny. I just got mine in. Went thru the exact same head scratching moments on the wing attachments. Not sure if I will like it in the long term. I’m a bit irritated with the cheap wings and mine keep falling off when bumped and even the plastic latches come out that hold wings up for storing.
@Woodcraft716 Жыл бұрын
Thanks @dar7771. I must say as cheap plastic as it is, I still find myself reaching for the 720 above the Massca and the Armor Tool. I think they are both made better. But, something about Kregs ease of use keeps me grabbing for it. Thanks for watching and taking the time to comment! 👍
@alohahoward1 Жыл бұрын
Thanks, since the K4 and K5 have been discontinued, I'm going with the M2.
@Woodcraft716 Жыл бұрын
A great choice. It will last a lifetime. Thanks for watching and taking the time to comment. 👍
@TheCrusades1099 Жыл бұрын
Best review!!!
@Woodcraft716 Жыл бұрын
Thanks JR. I've done a few reviews after this video comparison between Massca M2, Armor Tool. And I wasn't exactly nice to Kreg in those videos. But, it's been over a year and I still reach for the Kreg. It's easy-to-use. Thanks for watching and taking the time to comment. 👍
@1jeffr Жыл бұрын
Very nice. How did the black paint hold up over time? Should a primer be put down first before the black paint?
@Woodcraft716 Жыл бұрын
Thanks 1jeffr. The black is holding up well. No problems. Although, putting primer down first is always a good idea. Thanks for watching and taking the time to comment. 👍