Im a plumber, gonna build one with copper pipe and potentially coil some copper wire on the outside of the magnets and also encase the whole thing in beeswax for added pressure onto the magnets cause allegedly the beeswax has an electromagnetic (paramagnetic) effect see what happens i guess!@@Gazzasore
@electrifyingjayanto9 ай бұрын
Ohhhh nice ❤❤❤❤❤
@robertmullen7586 Жыл бұрын
It looks like you reversed the polarity on each magnet you placed on the pipe so they all resisted each other, is that the recommended way to build it, it seems counterintuitive to me.
@Gazzasore Жыл бұрын
That's what I did at the Time It may not be correct
@Jeni_hehe Жыл бұрын
🤩🤩
@markoknuutinen2506 Жыл бұрын
WARNING. Listen...everybody talk about neodymium magnets but nobody talk how dangerous they are handle. I am going to order 20mm x 5mm neodymium magnet and that can hold over 8 kg weight. If you put finger tip between two strong magnets you will hurt and that is not even a strong magnet. Even 10mm x 5mm magnets can hold over 3 kg weight. Neodymium magnets are so strong that you can't put two magnets plus and minus poles together because they will broke and you may hurt youself.
@Jeni_hehe2 жыл бұрын
Mataneedol School💃💃
@Jeni_hehe2 жыл бұрын
6 years ago and could probably do the same dance😂
@karizma59002 жыл бұрын
This can reduce scaling problems ??
@Gazzasore2 жыл бұрын
No idea Buddy we didn't have Scale problems to start with
@callyman2 жыл бұрын
I've been trying to work this out for years as I bought a 2 stage water filter years ago with a magnetic attachment to structure the water as It comes out. somehow over the years the magnets got moved around until now where I find myself with the whole thing apart. I have 2 strong bar magnets designed to go either side of the ferritic stainless steel out spout so would I be right in assuming these 2 magnets need to be repelling each other in every pole in either side of the pipe to structure it? I know which way Tastes better but is repelling right???
@Gazzasore2 жыл бұрын
I believe negative should face the water
@angyfuentes21842 жыл бұрын
Gcs
@Gazzasore2 жыл бұрын
Gcs ???
@pottymouthmexican3 жыл бұрын
i dont think it works like that.
@FinancialConsultdotcodotza3 жыл бұрын
You clearly do not understand the science of what you're trying to do
@Gazzasore3 жыл бұрын
Thanks It was many years ago I know better now
@dharshan21303 жыл бұрын
Damn Stay safe and stay home And upload some new videos in your channel Have a nice day 😊
@MJafro3 жыл бұрын
Very nice looking tree
@pradeepkumarsundararaman65203 жыл бұрын
Great video sir n watching this after a year of ur publishing Now few questions sir 1. U had used 10 magnets. So what is the weight of each magnet sir. 2. Sir. How did u finalised that u hv to use only 10 magnets with each one weighing to certain grams. 3. Sir Have u teated the structure of water with these Ten Magnets. 4. Sir Have u tested it with adding 18 magnets with same weight instead of 12 n have u tested it with 9 magnets instead of 12 magnets with same weight regarding structure of water Idea is to find out what is ideal Number of magnets with some specific weights 5. Sir is these magnets r made of Iron or Neodym material 6. Sir Also have u placed some more small Magnets inside the pipe so that water can flow through directly on the magnet n get more structure. 6. Sir yes using Copper pipe will increase conductivity n may help to enhance Structure of water. I kindly request u to you to reply sir Thanks n regards
@Gazzasore3 жыл бұрын
I made this many years ago I was just an experiment You can make it in any configuration you want That's just how I made it If I was doing it again I would use Neodymium Magnets
@trieule30613 жыл бұрын
Hi. I wonder why you have N-N and S-S of the magnet instead of having them N-S so all the magnets becoming a strong magnet? Thanks
@Gazzasore3 жыл бұрын
I built it many years ago I would do it very different if I built it again
@faithjanel3 жыл бұрын
@@Gazzasore so how would you do it now?
@Salo2318102 жыл бұрын
Q
@faroukchaabna81444 жыл бұрын
You need a strong and powerful magnet like a neodym to have more efficacity
@bouchompoochairuk3294 жыл бұрын
i use neodymium magnet for water magnetizer coditioner . but not for install. i want to soft water. Question for you what happen after use it? share please.
@Gazzasore4 жыл бұрын
It was just one of theany things I did Because my Daughter was getting Sick often in those days Didn't notice anything with the Water But my Daughter was healthy afterwards
@immanotgoingto4 жыл бұрын
I read that what matters is the polarity. Apparently, the north polar end is beneficial for humans and the above ground part of plants, and the south polar end is good for plant roots. I believe the information came from Rudolf Steiner.
@keith66102 жыл бұрын
that’s for plants mainly and direct human contact with magnets. what really matters is just passing water through a bunch of magnetic fields as long as you do that the magnet is doing its job👍 although it’s better if it alternates like north, south, north, south, etc. but both sides will do exactly what you want
@DudesRights4 жыл бұрын
Why don't you just put them a inch apart
@Gazzasore4 жыл бұрын
This was just an idea years ago You can change it to anyway you like
@DudesRights4 жыл бұрын
Or glued them together 1/2 inch apart
@74HOLLE4 жыл бұрын
Awesome! Thank you very much.
@forgotmypassword28045 жыл бұрын
Whats the difference between this type of magnetic orientation versus the clamping magnetic water conditioner device? Thanks
@Gazzasore5 жыл бұрын
Not a lot But if I do an upgrade I would make it from Niodidium? Flat Magnets With North Facing towards the water
@olddutchcomedy5 жыл бұрын
Sawasdee khrap great video khrap thanks for sharing 🙏🇹🇭
@joseluizm.garcia9985 жыл бұрын
When the australians are going to learn how to speak english properly ?
@vallikenhaven58435 жыл бұрын
The PVC will create electrostatic discharge! This will break down inner walls and micro particles will pollute the water! If you do this with copper as you said at first, and put a flux calorimeter you will see very interesting results and it does matter if the mags are aligned, it dissipates the heat flux.
@smallghost02531415 жыл бұрын
Do you mean using copper pipes? Do not use PVC, plus magnets?
@smallghost02531415 жыл бұрын
Can you explain in detail? Thank you very much.
@sraghdam5 жыл бұрын
North Pole facing water is for human consumption and South Pole facing water for plants and vegetable. Got these info from years of search!
@vallikenhaven58435 жыл бұрын
Nonsense!
@dwarfsalad70115 жыл бұрын
gogt a link where to getthose magnets s??
@Gazzasore5 жыл бұрын
No I just searched on line this was many years ago
@darpansharma34635 жыл бұрын
4#&2&$+-2+😠
@ricardomolina87736 жыл бұрын
Make a copper winding emperor airstrip a carpel inside your system In charge the water Please Said me one if good results
@David-Masek6 жыл бұрын
Does it matter where south and north pole is? I think magnetic field induces electric field in moving water (like in dynamo) and this electric field turns water molecules to the same orientation, because they are electrically polarized by nature (each molecule has + and - side, this is the reason why microwave owen can heat/shake them by the way) and after magnetic structurization, molecules stays joined together electrostatically like bigger clusters (or smaller maybe, because running towards magnetic field and away from it generates AC, not DC). Here is my question. Are the clusters comig out from north pole ring magnet identical with south pole clusters? I think they should be, but another video says "we water plants with north polarized water only" or so...
@Gazzasore6 жыл бұрын
David Mašek Hi David North is what is needed if I was making the Magnet Water again I would buy some Neodymium Magnets make a wooden holder that could clamped around the pipe to hold the Magnets in place have North facing in towards the water hope this answers your question
@nexuszephyr5 жыл бұрын
Gazzasore what if you have a doughnut magnet? Which side of the magnet would I need to face up while Placed on a glass and would just pouring the water through the hole work?
@earlraff91626 жыл бұрын
How about metal washer between each magnet.
@Gazzasore6 жыл бұрын
Earl Raff I think that would stop the Magnetizability and stop the system from working
@zangiefromanov25636 жыл бұрын
No, apparently it changes the field so one pole faces inward towards the water and another faces outwards. This directs the field directly at the water depending on how you arranged them. You want N to face the water not the south.
@adelmakki46027 жыл бұрын
Thank you for nice video,you put ten pieces of magnets,can I put mor ..or if I put 5pieces ,is it enough to magnitiz the water,,thanks again. Adel from Iraq
@Gazzasore7 жыл бұрын
Adel Makki Hi it was all a guess I will re- do it one day I will use Neodymium Magnets with the North facing towards the water pipe
@energymarketchile4 жыл бұрын
@@Gazzasore Hi, did you do that experience? What results can you report after using your first assembly? Thanks!
@GreenLifeOmaha_GLO7 жыл бұрын
I got 1 better. Take a neo magnet and tape it to the main water pipe of ur house. North pole facing the pipe...BOOM...whole house north water.
@Gazzasore7 жыл бұрын
Green Life Omaha #GLO I will redo it one day
@HouseRentalcorp6 жыл бұрын
I hope I don't sound like a complete idiot haha but what do you mean by North Pole facing the pipe?
@Gazzasore6 жыл бұрын
USNvet4Trump Different Magnets with the North Pole of the Magnets facing the Water flowing through the North or Negative side is Best
@HouseRentalcorp6 жыл бұрын
Ok great to know thanks for the reply.
@stylishranchgirl5 жыл бұрын
So in other words, fasten the magnets horizontally top and bottom vs on a vertal pipe ??
@Gazzasore7 жыл бұрын
It's been 2 months and they are just sending up shoot's now
@bettyaaliddell77918 жыл бұрын
OK thank you I don't want to be a magnet pole for lighting, giggling
@bettyaaliddell77918 жыл бұрын
this maybe a silly question but if I'm drinking magnetized water, will or can the body attract lighting during lighting storms?
@Gazzasore8 жыл бұрын
Hahaha I don't think so
@freddykugr5 жыл бұрын
OMG good question , i might have to move , Sorry im just kidding But its a good question
@jimviau3278 жыл бұрын
Great idea, love it. Now, can you think of a clever cheap way of creating a vortex in that pipe. It would help recreating the natural vortex waves the water feel in a natural river.
@callyman2 жыл бұрын
Doesn't structuring create the vortex?
@thetranspersonalalchemist Жыл бұрын
I think that’s the purpose of the magnets
@dalilalhafid58388 жыл бұрын
We need more private tests on PH level please thanks for sharing
@Gazzasore8 жыл бұрын
cheers Bud
@Gwendoline9658 жыл бұрын
Hey just put a magnet into water and SHAKE IT!!!! Said Raw Vegan Gwen!!!
@Gazzasore9 жыл бұрын
I don't seem to be able to reply any post anymore I get Emails sent saying new post but come here and nothing
@skylersmith60989 жыл бұрын
Check out Jon Ellis water machine. Best water ever.
@georgehoudalakis91559 жыл бұрын
Hey mate where in Perth fitted the M90 for you? I'm thinking of places to go for my own soarer 1uz
@Gazzasore9 жыл бұрын
Long time ago buddy Joel made the Manifold for me Check out planet soarer I fitted a lot of it myself Armadale 4x4 fitted the Unichip computer It's not just a straight forward job Good luck
@edentribe61159 жыл бұрын
great simple to make stuff, where people pay loads of money for thanx for sharing and igniting
@budgetechgadgets9 жыл бұрын
What psi was it running Gazza? Also did you have to use aftermarket ecu to run the charger at all or does the stock 1uz ecu run it fine? Just asking as I'm looking into buying a m90 Eaton this week for my uzz31
@Gazzasore9 жыл бұрын
About 6 or 7 psi I think I had a Unichip aftermarket ECU Mine was also all intercooled too One of a kind I sold it about 7 years ago Wish I still had it
@budgetechgadgets9 жыл бұрын
I remember it mate, young bloke named David bought it off ya and came on a couple Perth soarer cruises with us guys back in 09 think it was, then he put it back to standard and sold it
@Gazzasore9 жыл бұрын
He took it off because the bearing went in the SuperCharger they are so easy to replace I took me about 2 years to get it all sorted and running correctly
@Gazzasore9 жыл бұрын
dgsoarer If you go to the Soarer Central and Lexus Soarer Club sites you will see all the Mods I did and here for the Main mod www.planetsoarer.com/joel/Joel.htm
@CartmanSandiego9 жыл бұрын
Just food for thought, PVC is made with BPA, Bisphenol A. Little bit of research into bpa is enough disgust anyone.
@Gazzasore9 жыл бұрын
Easy Magnetized Structured Water System
@johnpenlington54119 жыл бұрын
I have two questions. The first if I wanted to use this in my swimming pool which has 40mm pvc pipes would this work? Secondly if I wanted to use it on my copper mains feed to the house would this work or does it need to be pvc?
@Gazzasore9 жыл бұрын
No problem working with the Pool Read other post as some people have other ideas about how the Magnets should be laid out and the right size magnets Copper , Magnets have an effect on Copper search for effect But once again shouldn't be any problem This is just my Idea of how it could be put together but feel free to to change anything as you see fit Its not an exact science Well not that know of anyway
@callyman2 жыл бұрын
Putting the magnets on your mains is a great idea! I never thought of that.
@Gazzasore10 жыл бұрын
Here is the Old Dyno results and New alscforum.com/discus/messages/123/10554.html?1301619218
@mashj5010 жыл бұрын
a little tip I have been harvesting ring magnets out of old Microwave ovens thrown on the tip !! there always seems to be heaps of them laying in the metal pile , what your looking for is the magnatron it has 2 ring magnets inside each , be careful not to disturb the ceramic tip on each magnatron as it is radioactive apparently simply cut into the side of the metal box housing the magnets and gently remove them they are not glued they will simply pry out, I have made a unit like yours also and agree maybe glueing them with some epoxy may be a good idea and also an outer shield of lager PVC may be wise as they are very fragile I have lost a few simply by letting them slam together ! which shattered a few , opposite polarity obviously isn't an issue in that regard , but you have to watch it working with them in case they find each other and slam together, good vid will do one also when i do the next unit cheers
@Gazzasore10 жыл бұрын
Cheers mashj50 The first one I made is still going strong One guy said the Magnets shouldn't be forced together leave Gaps