4 ай бұрын
10 ай бұрын
10 ай бұрын
11 ай бұрын
11 ай бұрын
11 ай бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@horacelee880 Күн бұрын
Sir I have a merc 150 blk max engine. I need to replace the poppet valve so I made an attempt to do replace it but the rubber gromet that holds the poppet went down into the water jacket hole. Will I have to tare down the engine to retrieve it or is there another way to get it out?
@michaelsaberhagen4752 4 күн бұрын
Hi I found this video super helpful. I'm in a bit of a situation because my child lock is activated and the external door handle on the rear left door has broken so I have no easy way of opening the door from the inside and the outside. Can I take off the door panel from the inside with the door still closed to access the lock mechanism? Seems like a tough job! I have a 2012 Pathfinder
@FKCamVlogs 4 күн бұрын
There is a video by Charlie do it all for situation like yours, it might help. It will be hard to take panel off with closed door.
@Grayhook1 6 күн бұрын
I have an ‘06 and just a tip on removing the heater core manifold pipes that are under the hood. It is plastic and very fragile. I had to replace mine because of a hairline crack and a mystery coolant loss. One day a puddle under the pathfinder. Not cheap part either. But easy to replace. I did a heater core on my ‘88 Nissan years ago. Took out everything but the windshield and steering wheel.🤣 Thank you for the video!
@FKCamVlogs 6 күн бұрын
Thanks for sharing!
@euclidesmestre383 8 күн бұрын
Great vidio thanks
@brianmooney7009 12 күн бұрын
Great job. Thanks for
@ripbones6631 14 күн бұрын
Why do people complicated it, 1/2 guart per 2 gallens.
@motorv8N 22 күн бұрын
Thank you for this - I had no idea this could work.
@iritantNL 23 күн бұрын
Thanx 👍🏼
@daniellucker 23 күн бұрын
Just curious why you replaced impellar as it looked ok ? I have the same 150 XR6 noticed when going slow it doesn’t pee good and alarm buzzes when wide open does fine but water is very hot to touch when peeing great job on video ! I’m doing this hopefully this evening if they have the kit
@FKCamVlogs 23 күн бұрын
I replaced the impeller based on hours of use or timebsince last replacement, even if it may look ok, but sometimes fins deteriorate resulting in sometimes what you are experiencing
@danielmaaran1854 26 күн бұрын
What Mobil oil is that 0W-40
@FKCamVlogs 26 күн бұрын
Yes
@WifeyEst2011 Ай бұрын
After you moved the metal frame how did you get the plastic duct out of the car to take out the heater core
@FKCamVlogs Ай бұрын
Yes...that makes it easier to pull out
@nickrdgz9323 Ай бұрын
Why Lenco and not the Bennett Tabs? Also, why did you have to remove the hydrofoil, can't you have them both?
@FKCamVlogs Ай бұрын
It was personal choice for tabs, the hydrofoil would create extra drag and lower the speed a little. The tabs are working as they should
@charliekilo3 Ай бұрын
Thank you so much for the educational videos. I own a 2006 Frontier and my heater core just started leaking in year 18 of ownership. I will refer to your videos to guide me when I tackle the job. Well done, Sir.
@FKCamVlogs Ай бұрын
Thank you !
@TheDJEnrique Ай бұрын
i can’t fit my hand in the whole
@FKCamVlogs Ай бұрын
Yes, it doesn't have enough space. Its a struggle.
@amyserdy6225 Ай бұрын
Very helpful
@jeffstake2570 Ай бұрын
PERFECT. Short, sweet and to the point.
@robertbenito8462 Ай бұрын
We're is part 3
@FKCamVlogs Ай бұрын
Sorry just seeing this, if you go to my channel go to play lists, look for Auto DIY, look for final part. Thanks for inquiry
@larryburns3561 Ай бұрын
They have a new screw plug which is the easiest way to plug your tire. Just keep some plugs and a small compressor in your trunk and you are good to go
@cxx1953 Ай бұрын
Great video
@ianatkinson8464 Ай бұрын
😎👍
@cookingwithmammajee1930 Ай бұрын
🇵🇰🤝🌷🙏♥️👍🌺🤲 assalam walekum beta Subah bakhair Allah Tala beta aapko bahut sari kamyabi aur tritiya De Amin cooking with mama ji
@FKCamVlogs Ай бұрын
WS - Allah aap ko kush rakhay
@Cmack6025 Ай бұрын
Hi, would you happen to remember what the torque setting is? Thanks.
@FKCamVlogs Ай бұрын
I believe 98 ft lbs
@nola2635 Ай бұрын
I have this exact motor and finished the valve replacement yesterday using the same kit you used off of Amazon. I am getting water from the vent hole from the moment the engine starts. Before I order the OEM kit, is there something I should check to fix this problem?
@FKCamVlogs Ай бұрын
Get the OEM, the kit from Amazon is cheap, gasket is bit thick, plus diaphragm doesn't site well. I redid many times, till I ordered the OEM
@kisdasenglothnam Ай бұрын
What Mercury outboard do you have?
@FKCamVlogs Ай бұрын
2002 150 XL Saltwater series 2 stroke
@kisdasenglothnam Ай бұрын
@FKCamVlogs Nice. I have two 2001 Mercury Optimax 150s. They're overheating and I am looking for solutions. I've already changed out the impellers and thermostats.
@FKCamVlogs Ай бұрын
Did you used OEM thermostats? Did the wings of impellers are in same directions as the old ones? If yes to both then next thing on list is poppet valve, make sure to buy OEM as well
@kisdasenglothnam Ай бұрын
@FKCamVlogs I found what the problem was. I had sent one of my ECUs to get repaired and didn't flush out the outboards. I left them for a week and a half. The salt crystallized and wasn't allowing the thermostats to open up completely which caused my port side outboard to overheat. I took out the thermostat housings and had to scrape off all the crystallized salt on both outboards. I also used a file and sandpaper to clean them all up. I took out my boat earlier today in the San Diego Bay and both outboards are good. And oh, I used the Quicksilver thermostats so yes, they are the OEM ones. Thanks for following up on my question. It is greatly appreciated. Now I will be going offshore fishing to hunt for yellowfin tunas, bluefin tunas, dorados and yellowtails down in Mexican waters.
@FKCamVlogs Ай бұрын
Glad to hear! Enjoy fishing.
@sulimandc3467 2 ай бұрын
Big difference and shine
@weihuazhang5127 2 ай бұрын
good❤
@shafeekhan3903 2 ай бұрын
👍👍
@Blukiz_pr 2 ай бұрын
Awesome video! Thank you ! 🙏🏽
@juanpablotabares-tb1yi 2 ай бұрын
How long is this job
@FKCamVlogs Ай бұрын
Its a long job ...like 8 hours for me when I did it
@biged5033 2 ай бұрын
Question - I recently bought a 1999 GTX Limited and it has the same thumb throttle. The Allen set screws are missing. Does the entire thumb throttle housing need to be removed to insert a new one?
@FKCamVlogs 2 ай бұрын
I did it a while ago but it is easier if you open it all. Those allen screws are a nuisance, lube them with anti rust and install
@perryrody1837 2 ай бұрын
Going to try both methods on my 6hp this afternoon.
@FKCamVlogs 2 ай бұрын
Good luck and post how it went!
@jimeylee2036 2 ай бұрын
Thanks my friend!
@ryantran429 2 ай бұрын
Noticed you have a hole in the air intake tube that sits right in front of the turbo. Had that issue too. Got the part replaced for $80CAD and put heat reflecting tape over it. Seems to be holding on well so far.
@FKCamVlogs 2 ай бұрын
I need to see to it, what issue it causes?
@sentient8146 2 ай бұрын
I'm going to follow your follow your lead. I thought it was going to be a lot heavier. I'm not sure I will wear sandals.
@FKCamVlogs 2 ай бұрын
Haha dont wear sandals
@vitalyon9390 2 ай бұрын
If you cant afford the newer version, dont put it in your thumbnail. Basically clickbait. "Freezing" your wipers halfway your front window is different on the newest CLA
@FKCamVlogs 2 ай бұрын
I am sorry for your lack of knowledge. The model you see in thumbnail is NOT a newer version, and regardless of the model, if you dont know how to, "freeze" then you dont. Dont blame your shortcomings on newer version or year. Also probably my garage has more cars what you can afford even if you work rest of your life. Take your car to dealer, you are the reason they are in business, if you cant afford service, dont buy cars that dont fit your budget. Note: You don't need to freeze to swap wipers.
@vitalyon9390 2 ай бұрын
@@FKCamVlogs As a 21 year old owning a CLA 45 AMG, worth more than your entire life im doing good. Get yo 40 year old ass outta here if you cant see yo broke ass 5inch screen in the middle of your console. The car is clearly an older model of the cla. Prob 2013 version, where my rims cost more than the entire car
@FKCamVlogs 2 ай бұрын
What is upsetting you? Your car will never stay new,. I dont need to disclose to any John Doe what I have, if your car is CLA AMG then go look for that class youtube videos and learn how to talk. Owning a Mercedes doesn't mean anything, just know its a car, thats all. What matters is how you ask for help or guidance.
@vitalyon9390 2 ай бұрын
@@FKCamVlogs Nothing is upsetting me man, just saying the thumbnail is a bit misleading since a part of it isnt the same on newer models. You came talking down to me about me not having any knowledge about cars, so it got outta hand from both sides. I was just saying, the thumbnail is showing the newer model, and you have the older one. They dont work the same way cause mercedes always finds a -more pain in the ass way to do simple tasks
@billymoore580 2 ай бұрын
Why didn’t you put that little blue piece at the bottom with oring back in ? Did that base plate replace the old piece?
@FKCamVlogs 2 ай бұрын
Yes the white plate replaced the blue plate.
@Giolongino1963 2 ай бұрын
Hey man, great video. Don't apologize at the first that many people may know and not need this info. There ARE always people that need help with new things. Take care buddy and I wish you happy and safe boating!
@FKCamVlogs 2 ай бұрын
Thank you !
@gilbertramos7487 3 ай бұрын
I got 1999 infinity qx4 4x4, do u think it will fit that coil spring to my infinity??
@FKCamVlogs 2 ай бұрын
Check with dealer for exact part number for your vehicle.
@ishansmixedvideos8279 3 ай бұрын
Wow vary nice brather
@mthomps0 3 ай бұрын
That’s where I purchased my S550. Catonsville Mercedes.
@FKCamVlogs 3 ай бұрын
No, where you see? I am curious
@FATALUTY10 3 ай бұрын
My optimax is pissing cold water but I get a long beep with rough power at Low speeds, do you suggest it's the poppet valve or thermostat?
@FKCamVlogs 3 ай бұрын
Thermostats have to get to a certain temp to open up. I think its 140 for Mercury. Check them first, they are easy to swap than puppet.
@djv100 3 ай бұрын
What a project.
@melissascearce8669 3 ай бұрын
So we have put ours back together and water keeps spitting out of the air hole. We have taken it apart and put it back together several times with no luck. Do you have any advice?
@FKCamVlogs 3 ай бұрын
Are you using OEM parts kit or after market?
@christiannordin232 3 ай бұрын
Do you see that mini lightin the beginning
@kmhovlog6185 3 ай бұрын
wow so nice
@perrydavis9946 3 ай бұрын
Beautiful 201 bud I have a 95 201 and I love it
@ken9431 3 ай бұрын
Awesome, Beautiful boat and marina.
@ChrisplussTina96 4 ай бұрын
Hi, I have a 2006 Pathfinder and the airbags won't deploy according to the dealership (i had to take it in to check an emblem recall on the steering wheel.) will this fix that issue?
@FKCamVlogs 3 ай бұрын
I am sorry I am not aware of this issue