This videos reminds me of the blind leading the blind! 😂 But ya got it figured out with a lot of time and effort.

Super labombastic fantastic skolastic 👌😌😀💪👃🧛‍♀️🦵🤝👍👏🤘💕🥰😘😍🥽🤼‍♂🚦⛑️👽♂️🥿💘💯😇🙏☀🌛🐬👑👀💑🚐🦷✈🚀🧠💋

I dont have the T10 screw driver (it took me FOREVER to figure out why my regular one wasn't working) has anyone tried rinsing it with the glass cleaner without taking that part off?

First and foremost THANK YOU so much for making this video! For some reason I can't unscrew the blue thing (after you took out the filters) Unfortunately I can't see if what I'm seeing is in fact a screw or not (there is something there but not sure if it's meant to be unscrewed or not) When I moved into my place last year we were blessed with bed bugs. The company that came out to spray told me to purchase this powder that supposedly dries it out (not sure if it was the spray powder or the simple fact that I was vacuuming/wiping down DEEP CLEANING EVERYTHING a minimum of 3 times a day) I have yet to do a deep clean on my vaccine because shortly after thaty daughter was diagnosed with type 1 diabetes. It's been a crazy year to say the least. Basically my question to you is can I still used the glass cleaner (and water) without taking the blue part completely off? Or do I run a risk of something happening?

Where does your overflow line go to on the radiator red cap

Thank you for making this video, it is the only one I have seen for this older model. Also I was quite entertained watching you say "this is the last screw" as I had taken all those out but was stuck on the hidden one under the switch I was not aware of. This is one of the most resilient vacuums I have had (this is 2nd one). Also WTH were they thinking not making the canister removable?! Anyway thank you and stay handy sir!

Ok good to know thanks brunnen

The metal shield probably isn't a heat shield. It's probably a RF (radio frequency) shield to prevent interference from other electronic devices or prevent it from interfering with another device or it does double duty (RF & heat).

What brand brake lever is this? Do you have a part #? Thanks

What the hell was the rant about Jews at 36:34? You were pretty helpful up until you went off the rails.

I come back to your video every time I clean my Dyson. I really appreciate how easy you have made the process. Thank you ❤

Hinge on dust bin broke where the pin goes through it. No way to repair it so I had to replace entire bin. I lucked out finding a replacement on eBay because Shark doesn’t sell replacement bins. Without your video I wouldn’t have found all those hidden screws. Man, what a pain!

I will be deep cleaning my vacuum as you did butttt from now on a little wipe down after each use to avoid all the hassle is also going to happen 🙃 😅

How many liters oil did u use??

Actual work starts at the 8 minute mark, you're welcome

Hey mate, did the inner rebuild kits come with retuning circlip that goes into the carrier? Not the one on the end of the half shaft

Спасибо, есть точно такой мотоцикл.

Its taken me two days to find someone who disassembled that dang dust can. I knew it was possible. I can't really tell how you popped the latch. The manual says to only rinse it out but that did make sense and it would definitely would take more that 24 hours to dry. I put mine in a 5 gl bucket good soak and blast with the water hose. Thank you.

welp. I wish I had bought another dyson rather than switching to shark. this is ridiculous. Great video thought, I'll be rewatching tomorrow and doing this step by step. Insane that I could break apart my dyson in a hot second with a quarter coin and here I am watching this video trying to figure out how to clean my damn shark.

I can’t thank you enough for this video. I have the same unit. Had the exact same problems. But after 4 hours 30 screws and a lot of cussing, she sucks better than ever. And like you…I have 2 extra screws left. 😆

Are there supposed to be o'rings on the jets?

Dumb fool

Took it apart, got mad, bought a new one instead of putting it back together

Can i buy this paddock,can u share the link

Thanks a bunch this is an amazing video

okay but is he married ?

That skinny filter comes apart for cleaning.

Just bought one great video cheers

Just get a can of air and blow the dirt out. Takes about 5 min.

Thanks sooo much. Really well done.

Just upgraded my unit by following your video. Thanks for being the brave one to pry off the original filter! My kit didn't come with any instructions at all, so I would have been very reluctant to just start prying things, hoping that I was doing the right thing!

I’m so glad I found this. I bought one just like it off FB. Owner said needed cleaning but I didn’t realize she had never ever cleaned it and had two huge dogs. This thing was clogged full of fur and stinks so bad. The main filter was darker than I have ever seen a filter. It was absolutely disgusting. Almost said screw it and threw it away.

Had one of my balls floatimg around in inner boot bad sign lmao?

I was doing it as i was watching random videos and this video was next😂 but i was on my way back reversing when it started playing i gave up once i got to the motor 😂 i took wet wipe and cleaned the plastic eff it its just a vaccum

Where do you get the metal inserts?. I'm dealing with this very thing right now. Thank you for the video it was very helpful

If the light is out the hashboard is not running. In my case the board is broken and needed new mosfet. I advise installing 'brains' os, it gives you the ability to set a max power (watts) instead of full power. Less power less stress heat and noise. Cool garage 😎

Most power PSU's are the same height and depth. The length changes with your higher power PSU's. The PSU's with removable cables are called "modular", which allow you to remove the cables you don't need to reduce case clutter. Those little single pins are for the motherboard "beep" speaker, your hard drive activity light, power LED light, reset switch and your case power button. two connectors each (+ and --). the connectors are usually labeled but not always the pins on the mobo, and not all mobos have them in the same positions, so it's a good idea to look at a manual or google it. A lot of times you want to hook those up early in the build while their easily accessible. Patience is key. Thanks for the video.

Serait-il possible d'avoir ce kit pour polaris Outlaw 525 IRS de 2009 en France? et a quel prix? s'il vous plaît merci

It would have been a better video if you would have explained what you are doing. Thanks for the effort.

There was cussing going on when I put mine together also

What length is the roller. Amazon was longer than the 8” I need. Description says it works for v6slim rechargeable.

🎶🎵🎶☠💀

Thank you for making this video. These instructions are abysmal lol

Thanks. Helped in getting the brush to work again. Dis assemebly was certainly a challenge.

I absolutely love this video, but you forgot to clean the small felt filter😊

I’ve been watching your videos here in 2024, I recently bought an outlaw 525s and am fixing it up. By the sounds of your video we have some pretty similar outlooks on how things went down. Hopefully you are doing well, thanks for making high quality videos on a not very common machine.

Wow! I guess this great for those who are able to do this themself, but except for cleaning the filters and brush head, I wouldn’t do the rest. Too bad you need to disassemble the motor unit to just get the dust bin off. That’s something I’d want to wash out. Great video though!

Where I can found parts for backside

Where I can found parts for backside

God that’s TACKY.