Shouldn't a mask be worn along with eye protection?

2019 Honda Civic Type R: If I do as you instruct, the product is going to go through the turbo, theoretically through the PRL Intercooler system, then theoretically through the intake runners, etc. Are you saying that 1) this is all okay, and 2) the product is actually going to make it through that entire path, cleaning both the turbo compressor and the intake valves? I ask because I tried it and never observed any smoke or other evidence that anything was occurring. This is a complicated intake path. If there is a better way to do this on my vehicle, please let me know. Thank you!

Reminds me of the old steam cleaning trick

I am getting a bottle tomorrow. Thanks.

I think if I did this, I would do it right before an oil change.

This video made way more sense than any video I've seen for cleaning a throttle body

Can i just use electrical cleaner

My partner was a tube I wedged between the seat and pedal to keep revs at 2000 rpm.

Be careful as these products will loosen the carbon and causing your cats to plug up

Hi, question, 1 oz x 20 or 4 liters of fuel?

This is a part that don't needs cleaning,it is clean always,the sensor is inside the plastic and outside it's only resistance

Very good ...let it dry naturally ? ...what about cleaning connectors and other sensors ....I had a truck chassis shot blasted ..been many problems with sand since etc ...what to use ...thanks for the video

How would I use this on a VW 1.4T engine where I have a boost sensor within my charge pipe and an MAP sensor on my intake manifold. Is this cleaner safe for those sensors just not a MAF? Or can I not use this?

Don’t the carbon get the cats

Are you supposed to clean the contact points where they plug in on the vehicle and on the part

Ehm, i know i´m late to the party, but i can´t wrap my head around how this vid got 16 MILLION views, but only 2 comments and 25 likes?! Or how it got 16M views in the first place, but hey, congrats regardless, i left a like! 😅👌

*empty 1/2 can , do in 2 times wait 1/2 hour then empty 1 /2 , after waiting to let fluid dissolve carbon. Do every oil change to prevent build up. Before oil change*

Lol

Cale Isle

will this fix engine light

Great!! Finally Larry Mac explained it so I could understand it. Wish u were on every race to explain things. Missing 😢U

How do u use gumout multi-system tune-up in the crankcase?can i leave it in there til next oil change?

can I do this on a 2012 chevy equinox?

Just added it to my V6 Honda Accord and it's riding very smooth 🚗

Can we use this and then a month or so later use the gumout tune up?

Can I use this with the ‘tune up’ also? If so, when do I use the tune up one? On the next gas fill up?

When should we use the tune up? And should we use it with the other Gumout product like the complete fuel system cleaner?

What? 23M views only 2 comments (incl this) 😱 but it is a great product!

Where to buy in Canada

2020 Lysanne Roads

Will this work on a 2012 audi s4 with supercharger

This sounds similar to the CRC product. I have used the CRC product in my GDI engine and I was impressed with how well the engine ran after application. The downside is that it is a two-person job like this one. I have used the Berryman product twice now which just hooks into the throttle body intake and dispenses while the engine idles. Not clear which is better, but the last time I used the Berryman I got a glorious cloud of smoke after I went for the post-application drive. The person behind me was probably not happy.

Hi what is the percentage of PEA in this particular product?

What do you recommend to loosen the tight hose?

Good gor vw 2016 jetta se turbo?

Excellent video

I just picked one up sport!

You might get a check engine light from this too. As long as the vehicle doesn't have any problems that you know of, clear it and see if it comes back. Some vehicles are kinda finicky and may even run a little rough until all of the stuff is gone from the air intake. Take it easy on it until then. If you are in a place with a speed limit of 25 or 35 that may be low enough for you to give it a good chance to get back to normal.

Shawn is a little punk ass. Yup. Have not forgotten how you burned me in Folsom.

how to do this to a hybrid?

Bill Eilliott in 1985

I bought one but I'm not sure how to use it, I have a 2004 sienna and the intake hoses are difficult to take off and there is a resonator. Not sure if I can just use a vacuum tube, not sure how and where to insert straw without damaging anything

How come the can says to rev up 2-3 times at the end while here it says to do it when can is half empty?

Will this work on a 2015 gmc sierra with 6.2? Also you say you don't have to do an oil change but you recommend it? I just did oil change day before I watched this video

I used this stuff in my crank case (a whole can + 5 1/2 quarts of Mobil1). I had lifter noise in the 4.6 on the passenger side and in less that 500 miles all that lifter noise was gone. The engine runs and sounds as smooth as a new one. I'm going to leave it in throughout the oil change for 5000 miles.......GOOD STUFF!

My bottle didn't work after a few sprays. It started leaking . Huge waste of money. I want to try again, but dont want to waste more money.

I wanna see this work on the 80K mile carbon build up. This process also seems like a giant PITA. Don't buy DI cars people. DI is for Diesels.

iam facing a clogged Hydraulic lifters that makes ticking noise. can i mix this with engine oil ? If i can than should i keep it til next oil change

I remember NASCAR inside line or 2011 i had some awesome setups including one for daytona, i could hit like 218 mph but the rear of the car was dragging the ground and was twitchy loose in the turns, but i didnt need the draft. I literally could take the kead from the rear in one lap amd lead all 200 on veteran mode. Had a bad fast setup for Atlanta too. Miss those days

does it work in e85 flex fuel vehicles?