Holy cow was that open annoyingly loud and unnecessary.
@csabapapp84815 күн бұрын
I don't get the whole thing. This could be done in 5 minutes with a steel brush on a drill. Of course that would be a boring video.
@nothankyou55245 күн бұрын
But you watched it? Well, at least you took time to make a PSA! That was nice, imo.
@nothankyou55245 күн бұрын
@csabapapp8481 He enjoys it. Me, I give things like that away, and just order replacements. Probably easier than even what you do. You're welcome
@Classic.Rescue4 күн бұрын
Yes, you're right! Sorry for that, I messed that up during cutting 😅
@Classic.Rescue4 күн бұрын
I always have the problem that the Wire Wheel only just kinda polish the Rust and don't remove it completely, that's why I put it in the solution. 😊 Probably some Rust remove solvents would be a better option for me to lose things up in the Future.🤔
@Gregor200222 күн бұрын
War der Tank gar nicht rostig ?
@Classic.Rescue4 күн бұрын
Luckily not at all 😁
@magnusrye443222 күн бұрын
👌👌👌
@Billy_Harrington_glen28 күн бұрын
Good luck ❤
@Classic.Rescue28 күн бұрын
Thank you! 😊
@ΣΠΥΡΟΣΜΠΑΤΣΙΟΣАй бұрын
Btw,this starter needs only grease and two rounds on the rope,only 4 screws to do that
@Classic.RescueАй бұрын
This is usually the best way to solve the problem.😁 I've already taken it apart and all the teeth on the starter are gone.😣 I'm already looking for a new replacement for it. 🤩
@ΣΠΥΡΟΣΜΠΑΤΣΙΟΣАй бұрын
Of course but never start something abandoned before full inspection....
@Classic.RescueАй бұрын
Thank You!🤩 Yes, you are right, but for a quick Start I was comfortable with it by just lubing the Cylinder and look a bit around it. 😅
@ΣΠΥΡΟΣΜΠΑΤΣΙΟΣАй бұрын
Sure you will do the job well, it's obvious from your work... I don't try to look smart,i was just saying,remembering what happened to me with this saw some years ago! Stay safe!
@Classic.RescueАй бұрын
Thank you very much!🤩 I really appreciate your comment and am grateful for any help to make sure everything works as it should.😁 Thanks! You too!😊
@tobiasjohansson9310Ай бұрын
Nice. Do you have a separate video on the rims?
@Classic.RescueАй бұрын
Thank You! 🤩 Sadly I don't. The Bearings and Breaks where in great Condition, so I just cleaned and polished everything up and put new Tires on them. 😁
@puchtuner53Ай бұрын
Great Work!👍🏻
@Classic.RescueАй бұрын
Thank you! 🤩
@Dixon-w3zАй бұрын
Yes, do it, restore it to its glory back in 59
@Classic.RescueАй бұрын
I will! 🤩Thank you! 😁
@Dixon-w3zАй бұрын
@Classic.Rescue your welcome. Good luck on the restoration
@samuelmartin26802 ай бұрын
Nice work 👌🏻
@Classic.RescueАй бұрын
Thank you! 😁
@hubertusmeijndert64782 ай бұрын
Je frame beugels zitten verkeerd om gemonteerd. Eerst de schokbrekers die zitten tegen het frame dan de frame beugels, die sluiten de schokbrekers samen met de moer
@Classic.RescueАй бұрын
Yes you are right! 😊 Thank you for noticing I will change that immediately! 🤩
@Agrar_max02 ай бұрын
There is a washer missing under the fork plate and a sealing ring under the steerer nut otherwise the fork has play
@Classic.Rescue2 ай бұрын
Yes, that's right! I did it off Camera. I also made other Screws, Washers and small parts this way. 😁 But thank you for noticing! 🤩
@AdrianClarke-q9x2 ай бұрын
How long do you think it was in that barn for mate?
@Classic.Rescue2 ай бұрын
The last Inspection was 2001 around that time it ended up there. It's probably one of the last that find its way into the Barn. 😁
@dvzo112 ай бұрын
ferkaufst du mir den alten puch sattel
@florianweibel52573 ай бұрын
Good video. However, you have installed the cylinder the wrong way on the engine. The intake and exhaust are the wrong way round.
@Classic.Rescue3 ай бұрын
You are right! You are the First who noticed my Mistake!😁 I have already changed it. Thank you! 😊