What country is this for thanks

This really helped me

I’ve connected a couple female flexiconnectors together with a stainless steel double make connecting piece. They all leak water from the top part of the flexiconnector. How do I make that watertight??

How do I connect 2 male connectors - from already there on the isolation valve and one with new new tap flexi connector.

How to install safety valve

The flex hoses do not kink. Do not twist the flex hoses. Make sure that the metal mesh is not damaged.

But my new pipes dont shiw what is hot and what is cold ??

Wait a minute. I know u

Thanks my guy

Who needs flexible hoses ? Ask me!

No todos masticamos el inglés estamos en México por favor poner videos en español

how it's work *********** where ***

Thank you

Can you show me how to put a shut off ball valve on gavanized pipe ?

Love the video and that you have put the entire text below. Good stuff. Please make more videos

Which one is the globe valve?

How many viewers don't want to hear the background music and subscribe bell ring in the middle of the explanation?

thanks

❤ love Canada Merci Québec Canada 😮

What about from female tee to male end that type of joint, do you need a paste or teflon??

Good day. I have installed a brand new element last night including the thermostat. Everything is wired correctly and set to 40°C. I have a constant 220V on the element and the water is waaaay hotter than 40. I don't know what I'm doing wrong

When are you going to do a video how to install a safety control valve please

Galvanized is the worst material to use in your home if you cant afford to replace it all unthread the nearest joint and use pex fittings to repair

750-850??!! Then I understand there's a South Africa accent 🤣

are these fittings intended to be connected directly to the flex line ? or do they need a little teflon tape or plumbers paste on the thread ? ?

I'm changing my shower and I've got flexi behind the wall, what do I need to attached the flexi to the mira shower bar I have?

❤

Hello ho do I refit a 15mm polycorp pipe back to galvanized elbow or steel pipe back , greedy thief ripped pipe out tinking it's copper. Txtxtx

Thank you. Got a small leak and I’m going to use a clamp

I have heard this debate for years and then I tried switching off my geyser each day and over a year and a half I have saved a lot of money. I think the geyser issue with the two kettle example is incompatible with actual plumbing. The reason being that kettles don't have meters of copper piping attached to them. The copper pipes acts as a heatsink to the heat in the geyser and cools the geyser constantly. If you heat the geyser once in the evening from when it is cold to say 55 deg it will use less energy than keeping it at 55 deg the whole day, especially in winter because the pipes are drawing so much heat out of the geyser. I realised this when in my roof one winters day and I could tell which pipes were hot water and which were cold just by toughing them. You could insulate the pipes but that will be more costly than buying a geyser timer and probably would not work as well either. As for the " burning the thermostat points when you put your geyser off and on" then consider this. If you switch your geyser off and on once a day the contacts only arc once a day, if your geyser is on the whole day then they arcing every so often when the thermostat is switching on and off throughout the day so I disagree with your statement. Also thermostat contacts are designed to switch current on and off all the time, that's their job. As for the breaker wearing out. I assume you referring to the electrical circuit breaker in the db. I do agree with you as those are not designed to be switched on and off, they are for occasional overloads. Installing a geyser timer solves this problem. An electrician will install one for R1000 and considering switching off my geyser daily has on average saved me about R170 per month, it will pay itself off within a year. I am not a plumber, but can tell you that everyone I know who switches off their geyser can show on their electric bill a noticeable saving.

Water seal for smells..😅

what would u do with a faucet? scratch it and use hemp or just teflon tape?

are those threads or rings?

Very helpful and comprehensive information. One of the best no-nonsense videos on this subject on KZbin. Thank you for posting.

Hi. I have the cheap plastic valve. The water comes out alot from the overflow. Its not very old about 10 months. Is it dirty? if it is how to i clean it? I know our munisipaliteit water is very dirty.

music is way too loud

Hi thanks for the info. If I have a 150 litre geyser what valve must I have to supply the geyser. Do I fit a 400 kpa or a 600kpa. Tnks

Nice Video ! Can I get your contact info, because I've something very important discussion with you about your KZbin channel.

Very nice video

Very nice Plumber's Tape

Useful video

Carry ON Waiting for nex turorial

Very nice Plumbing Pro video

Thank you so much,

Super video