that must be lead glass, soda glass does not get grey, or get a silver shine. when you use a hotter flame with oxygen, you will not have that problem. just rinse the grey silver out with the tip of a hot flame. but be carefull, lead glass is a lot softer than soda glass!
@fredericveyrier5022 Жыл бұрын
12mm tube ?
@jaygarza9567 Жыл бұрын
What kind of clips are you using
@edtak8461 Жыл бұрын
It’s called neon glass supports which can be bought in Amazon or neon sign supply.
@cliffordandrews17002 жыл бұрын
BOUGHT SOME GLASS TUBES FROM A NEON SIGN MAKER. The tubes are clear. However when I put the torch to it and close the end to blow a herb bowl; the glass turns dark gray with a metallic shine to every place I used the torch. Is that safe to smoke out of? why would it change color like that? I have not added anything to it
@rangaprasadkoppineedi28003 жыл бұрын
Wow
@GaryBaird.Photography5 жыл бұрын
Turn off the music.
@brunoliberto22475 жыл бұрын
Put transformer behind wall if you can or in ceiling
@brunoliberto22475 жыл бұрын
Allow lead wires are to long
@brunoliberto22475 жыл бұрын
Your supports twist and turns to follow the tube
@brunoliberto22475 жыл бұрын
You need plastic plugs for dry wall you put supports in wall frist and Mark the direction the support should go do it on the pattern to confirm with the tube
@brunoliberto22475 жыл бұрын
He's doing it wrong
@christopherayettey43903 жыл бұрын
How
@mylaanslickk6 жыл бұрын
This video is only if you are hard wiring it right? Because I don't want to hard wire it . I just want to plug it in. I want my light to have a backing on it anyways.
@edtak84616 жыл бұрын
This video for indoor no backing installation sample. You just hang and plug in if you already have a backing. Thanks.
@A1designsCoUk6 жыл бұрын
This is a bad installation, firstly you should not join or extend HT cables coming from the transformer doing what is shown in the video is a fire hazard. The connections on the end of the electrodes should be twisted together more securley and then folded down over each other not running back along the side of the electrode or pulled at length from the electrode due to the cable being too short. The electrodes themselves should be hidden better behind the glass. You should also install the tube supports onto the wall without the glass on it, then put the glass into place. Obviously different countries have different regulations so this may be acceptable in some places, in the UK this is not acceptable.
@edtak84616 жыл бұрын
Different countries different methods. This video is not training professionals. Just showing a guide line how our customers understand Neon direct wall installation. Thanks for your comment.
@hoanguyenthanh67906 жыл бұрын
thank you!
@hippiebike61686 жыл бұрын
Now it's a Showtime! Hahaha! I love Koreans!
@edtak84616 жыл бұрын
hippie bike Sorry I am Japanese American.
@deepanair50397 жыл бұрын
It s nice
@romaineathey65127 жыл бұрын
I made it, learned on Woodprix website. great solutions I think.
@bobsjers7 жыл бұрын
Why not paint the neon tubes white to match the wall, instead of black?
@edtak84617 жыл бұрын
Most of the time industry standard is in black, Only time when customer ask in advance. but you can use electrical tape or house paint also work for consumer level solution. Thanks.
@edtak84616 жыл бұрын
Bob S This video showing just a guide line for DIY. We do paint as requested. Yes! Thanks for your comment.
@propro8957 жыл бұрын
i love it , now i know how to install it ,))saves time and money
@edtak84617 жыл бұрын
Please make sure that each connection is tight and have rubber boots on it, also minimize the neon cable (GTO) to stay out from further trouble. Neon works the best with shortest GTO cable.
@jordanharris35537 жыл бұрын
You should not be showing individuals how to install these systems. Generally these transformers generate 1000 volts witch is prohibited in residential occupancies according to the National Electrical Code (NEC). Only licensed electricians should be installing neon and argon signage systems and not the average home owner or non licensed personal. Your creating a liability that could be catastrophic to the viewer attempting this installation and not having a disclaimer leaves you to legality that your not going to be expecting. Please be smart and know your codes and laws.
@Jakub-ru8ej7 жыл бұрын
mine generates 8000 volts, and I did it all by myself, but yeah, it would be better if I let "licensed electrician" do it for 200$ bc its soooooo difficult!
@edtak84617 жыл бұрын
Thanks, Now I am telling my customers to hire us or electrician to make it right. Have a nice day.
@edtak84617 жыл бұрын
The problem is most of people believe that neon sign is the same as household light fixture, We always tell them "It is high voltage devise" but still people wants to save money and say It's Okay I can handle it. After that they come back and say I broke the glass or neon doesn't light up.
@merylrox226 жыл бұрын
1000 volts? Try minimum 9,000 for this sign.
@merylrox226 жыл бұрын
It doesn't "generate" 8kv. Anyways, it's not that it's difficult, it's dangerous if you don't know the ins and outs of trouble-shooting things when it fucks up. It's a liability.
@Jack-308.877 жыл бұрын
Is this for sale I will do that $50 or $30 or $20 my email is [email protected]
@abissigns11 жыл бұрын
Do you want to display it while you are driving or at parking? Inside of your car or top of your car? Please reply.or call 626-818-4329
@TracyWick11 жыл бұрын
Could you create a real estate-themed LED scrolling sign for my vehicle?
@MrMikkyhan13 жыл бұрын
what if I want rate sign width 36" length 48" 2 sided outdoor in Tri-color rate with remote control. How much if would cost me? [email protected]