21 күн бұрын
3 ай бұрын
6 ай бұрын
7 ай бұрын
9 ай бұрын
9 ай бұрын
10 ай бұрын
10 ай бұрын
10 ай бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@alexfurer 8 күн бұрын
If I understand this correctly, there’s No zenith shot need, if the camera is tilted 7.5 degrees up. Correct? I guess with some loss in quality, or? Can the camera be tilted back to look up, or is the tilt limited on the R1?
@dxn-fanotec1127 6 күн бұрын
If you use a fisheye lens, say a Sigma 8mm on a crop camera, there is no need for Zenith shot.
@GregDowning 2 ай бұрын
A note for first time users. When editing the preset mine came up with 12Sh rather than 50mm. pressing the Up an Down button got me to 50mm
@hnnigbo 3 ай бұрын
Question: how do I change from step by step in the UI mode to continue without next/pause? Does it work with the left button on the C2?
@dxn-fanotec1127 3 ай бұрын
Yes, it works with the left and right buttons on the C2. When MECHA executes a preset and you press [left], it will pause and switch to step-by-step mode. Then, you can advance one position at a time with the [right] button on C2. Or, after you get past the problematic areas, such as the middle row with people, you can advance and exit step-by-step mode by pressing the [left] button on C2.
@hnnigbo 3 ай бұрын
Thanks for clarifying. We will use it for focus bracketing (for focus stacking). This seems to be the way to do it…
@chsyoon6755 3 ай бұрын
초보 사용자에게 꼭 필요한 기본적인 설명이 잘 되었습니다 Gooooooood ❤❤
@josephpooley1909 6 ай бұрын
How would you fix the mini adapter between the top of the travel pole and the bottom of the Mecha horizontal rotator?
@NodalNinja 6 ай бұрын
We kindly ask you to contact the manufacturer directly through the contact form on the page www.nodalninja.com/contact/20
@Uday-o7p 6 ай бұрын
Really Helpful thanks
@my1sec 7 ай бұрын
MECHA is a unique player in the panoramic market: it's a highly polished product, and with constant and ongoing updates, it's hard to imagine a more professional device. The only downside is that the overall usage of the device can be a bit difficult, which makes it very difficult to attract new users. It would be great if they could keep all the professional features and make it more accessible to beginners. I hope it continues to evolve into a product that newcomers can imagine "If I use MECHA, I can do this!". I'm a longtime fan of nodal ninja and wish mecha the best of luck.
@aleksgrynis 7 ай бұрын
"ou can control the exposure by using MECHA only when Bulb mode is set on your camera, as we have already shown in another video, and we will not talk about it today. " Can you drop the link to this video here?
@NodalNinja 7 ай бұрын
Here is the link: kzbin.info/www/bejne/goCaeZ2Kbs9nfrM Bulb Mode Exposure Bracketing Using MECHA | Shoot 360 Panoramas Automatically
@snap-n-shoot 7 ай бұрын
Much appreciated you went to the trouble of doing this. Thank you. Still a bit hazy about the 2 axis slider. Maybe a video in the future focusing solely on that would be helpful. Am I correct that it will shoot a Square area of 40/-40 to 40/-40 and the "10" means 10 positions or 10 degrees? Is it then shooting 8 rows by 8 columns? Or is is the Axis graphic not representative of the pattern? Or does it automatically calculate the correct number of rows and columns with overlap?
@NodalNinja 7 ай бұрын
You are welcome! Here is a more in-depth video about the two-axis slider: Partial Panorama Using MECHA's Two-Axis Slider - C1 and C2 Controllers kzbin.info/www/bejne/Y5-xeJiPZ5qNotk
@snap-n-shoot 8 ай бұрын
could you please add a video showing how to set up the mecha with a 200mm lens and take a 140 degree (or any other partial,angle) and to allow for bracketing 3 shots for example?
@NodalNinja 7 ай бұрын
Please watch the video below. We will make more tutorials on this topic in the future. MECHA Preset for 200mm Focal Length, Partial Panorama kzbin.info/www/bejne/r4PJoYONfq5sd5o
@snap-n-shoot 7 ай бұрын
@@NodalNinja Much appreciated you went to the trouble of doing this. Thank you.
@NodalNinja 7 ай бұрын
You are welcome!
@juliankrakow 8 ай бұрын
Great video. Thank you.
@sandraraynil 9 ай бұрын
The best explanation I’ve found.
@haraldthi 9 ай бұрын
The way I see it, accessing a web server over wifi is rather clunky as you will often need wifi for other things. Wouldn't it be better to move the UI processing to a mobile app and do the data transfer over Bluetooth? You wouldn't need to do all the work over again as many app environments can load web page data to the UI. And then you could use the processing you save on the mecha for more advanced functionality, or for saving a bit of battery.
@dxn-fanotec1127 9 ай бұрын
Thank you for the feedback. The MECHA web UI allows you to set and save presets, which can then be launched from buttons for efficient battery life management. You can also save entire presets and commands as URLs, allowing you to easily bookmark and access them later. When using the buttons, you can even turn off Wi-Fi to conserve power and only use it when necessary. This feature enables you to quickly recall and execute pre-defined sequences, even when offline. Additionally, you can have the MECHA connected to your phone's AP, use your phone as usual, and check the status or send commands to the MECHA on its client address.
@lipardfilm 9 ай бұрын
Many times if I switch off 'Find optimum seams' result in much better stitching.
@sebastiancuzincu2444 10 ай бұрын
How did you trigger the phone to take pictures?
@trollenz 10 ай бұрын
I see a bt remote on the side... I would also like to know how it's connected to the gear
@stephaniewillcox8067 10 ай бұрын
The Map color isn’t getting added I think something is wrong with my template it’s pink and purple when I open in PTGui and doesn’t look like squares
@NodalNinja 10 ай бұрын
A more detailed variant of the map png files can be downloaded from here nodalninja.com/MECHA-MAP/map-png.zip passw: Mecha Please note that the blending setting in PTGui determines how the Template or Map looks like kzbin.info/www/bejne/a5aTg6t7fqufeJo
@nusret232 Жыл бұрын
Super
@CraigTooms Жыл бұрын
This is awesome and looks so sharp. I see the images are tiff. Did you take the photos in the native camera app or did you use another one.
@yo3hi446 Жыл бұрын
Top
@brianbracherphotography Жыл бұрын
Very interesting results, would like to see a video on the equipment setup for this.
@MaiVanThanh Жыл бұрын
I'm also using Fanotec, I use sony a7iv and sony lens 14 f1.8, I don't know how to set up Fannotec Mecha E1 to capture 360
@dxn-fanotec1127 Жыл бұрын
If you have MECHA C2 controller, as in the video above, you can follow the steps in this video kzbin.info/www/bejne/a6qUkmyJa5qimJo and select 14 mm instead of 28 mm
@immersive360vr Жыл бұрын
Any tips on how to centre a 600mm lens.
@jeanmosquea9539 Жыл бұрын
Do you only do this once per lens or do you have to do it everytime you go out and shoot?
@71gregorio Жыл бұрын
Nice !! good to use for photogrammetry !!!
@360VRStudios Жыл бұрын
agree....I have an E1 learning
@kokoze Жыл бұрын
Is it better if those two tripods for testing are further apart?
@majorskepticism7836 Жыл бұрын
That looks to be well over 19 inches to me.
@TrigPhotography Жыл бұрын
Beautiful, looks so clean and streamlined.
@RickAFogerty Жыл бұрын
The Firmware Update explained on kzbin.info/www/bejne/a4GufWeuiLt5qtk seems MUCH easier.
@colinhuang8250 Жыл бұрын
Is the later splicing and synthesis using ptgui or automatic APP synthesis？
@Ismanden1000 Жыл бұрын
Are you gonna launch a smart watch?
@NodalNinja Жыл бұрын
We will post a video about that as soon as we have news.
@Andy360Foto Жыл бұрын
why can't the mobile be used in landscape? I want to use it wide...
@darrenm3377 Жыл бұрын
very cool! can we see the finished photo?
@darrenm3377 Жыл бұрын
impressive!
@JorgeHerreroChino Жыл бұрын
Excelente!!!
@Venti_kr Жыл бұрын
This is an interesting feature. What is the distance between Mecha 1 and Mecha 2 that can be safely used?
@NodalNinja Жыл бұрын
MECHAs are wirelessly connected in chain, e.g. 1>2>3>4 you can access 192.168.8.1/wifitest to test the distance from one particular MECHA. For an extended range, all MECHAs can be connected to a router or a mesh network (made of many routers even, with some wires between), in config you can set the WiFi Power to 100.
@gregariousgreg8413 Жыл бұрын
Good day, Please share examples of use cases for multiple MECHAs on a photo shoot.
@NodalNinja Жыл бұрын
Hello, we have put a link at the end of this video.
@gregariousgreg8413 Жыл бұрын
@@NodalNinja Is the link to the MECHAS on Stage video or something else?
@NodalNinja Жыл бұрын
It is just this link at the moment: kzbin.info/www/bejne/nHuvnmSGorSpqrM
@StephenDyer53 Жыл бұрын
Very interesting. It would be great to have some practical applications?
@NodalNinja Жыл бұрын
Hello, we have put a link at the end of this video.
@franklinames1264 Жыл бұрын
Is there a way to mount my camera (Sony A7 R3) in landscape mode on the nodal?
@NodalNinja Жыл бұрын
There will be an accessory for mounting the camera in landscape mode soon. facebook.com/groups/nnmecha
@CraigTooms 2 жыл бұрын
tape also works
@jimpurcell 2 жыл бұрын
Great idea!!!
@frankdieterich8414 2 жыл бұрын
Which part is needed to place the camera in landscape orientation. Is there a certain l-bracket available from Nodal Ninja?
@vrguytokyo 2 жыл бұрын
fabulous!!!
@domipro123 2 жыл бұрын
You say: Select a crop factor, or FF, which stands for Full Frame. I ask: what about medium format sensors (33x44, 40x53,4)?
@dxn-fanotec1127 2 жыл бұрын
In the select list, FF means 1.0 crop factor to a Full Frame set in MECHA's 192.168.8.1/config where by default is 36mm height and 24mm width, in portrait orientation, you can either change those values in config to, say, 53 height and 40 width while keeping FF in list or let the values unchanged and provide focal length in 36/24 equivalent e.g. instead of 28mm enter 18mm , that said, will be possible in future FW updates to enter a custom crop factor, like 0.65 and such.
@dxn-fanotec1127 2 жыл бұрын
Update:starting with FW (1)2361 there is an extended crop factor list which includes the medium format and point-and-shoot cameras, there is also custom value possible in the web UI.
@majorskepticism7836 2 жыл бұрын
This might be of interest: The August, 1990 issue of Popular Photography had an article about shooting parallax-free panoramas with 35mm film cameras. It was the first time I saw a discussion about lens nodal points. Single row panos, and a homemade camera holder (I found an “L” bracket binocular adapter worked better than their setup), and a focus rail to center the node over the head’s axis (again, I found just tilting the “L” bracket backwards worked as well). The main concern was the stitching (darkroom, enlarger, or taping prints together - no computers) indoors, and outdoors with nearby objects. Multiple rows could be done by tilting the camera, then raising or lowering the tripod center shaft to put the lens back at the same height. I did a few panos by cutting prints and taping them together. I have the magazine but I also found the article online. August, 1990, Popular Photography, headline - “SHOOT PANORAMAS WITH ANY 35MM CAMERA.” Not sure, but I think Amazon had the article. Side note - they mentioned lenses having two nodal points, one near the lens mount, and one near the front, sometimes a point physically a short distance in front of the lens. I thought the “rear nodal point” might be worth looking for, but have not been able to find it on any lens, at least with regard to shooting panoramas. If true, that could make some setups less cumbersome.
@NodalNinja 2 жыл бұрын
Thanks for the info, some related from our videos kzbin.info/www/bejne/iaK5d4aNe6moq5o
@ccwoodruffgmailcom 2 жыл бұрын
FYI, I have been using the Mecha C1 for the past 6 months and it has been awesome!!! I do landscape astro photography. If you want to see some sample let me know! AWESOME product!!!
@MultiMarco9999 2 жыл бұрын
Can't download the images of this "control room"?
@dxn-fanotec1127 2 жыл бұрын
Please have a look here kzbin.info/www/bejne/ham4fpWFnJd3a5o in the description of that video, there is a link to an archive with virtual images and PTGui files.
@klangr4usch 2 жыл бұрын
how can i detatch the leveler from the rail so i can get to the screw and tighten the screw?
@dxn-fanotec1127 2 жыл бұрын
Use a suction cup, the bubble is magnetically attached.
@myprowedding8726 2 жыл бұрын
No one explains if you can move your tripod from this point. Also, do you need to do this everytime you move to another room within a home?
@dxn-fanotec1127 2 жыл бұрын
The parallax point is specific for your lens(zoom) and shooting pattern, once you had found it, and set the rail or rail stop accordingly, you don't need to find it again, unless you change the lens or change the zoom. i.e. is good for other room and another, so on.
@noopynnus 2 жыл бұрын
What if I have a zoom lens? Does the no-parallax point change as the focal length change?
@dxn-fanotec1127 2 жыл бұрын
Best is to check for each focal length you want to use, as you need to be sure on overlapping area there is no parallax, at different zoom you have different overlapping areas, also the shooting method is changed, e.g. from 6 around to 8 around at longer focal length.