Does mounting it thorugh scupper affect side view? I have a gt54 transducer with side scan.

I know this a old video but where did you find the drain fitting. I can't seem to locate one?

Your spacing between the pads should’ve been 2 feet

Pretty neat operation and modification that I may come back and do. In my Tracker PT-175, I insulated the factory cooler with 1" styrofoam around the sides and lid. I used Great Foam where ever else I could not reach, as well as the adhesive for the foam. I also added styrofoam on the lid of my live well to extend the life of my catch. All mods. made a great improvement.

What year is this 175 TXW?

Can you show me how to mount bow mount trolling motor for inflatable kayak in the front?

Is your bow mount plate custom made? looking for one on my bote rover aero too

what is the manufacture and modle of the Kayak Cart you have installed on this 120? Thank You

I have owned 3 pro Angler 14's and 2 outback and 3 wilderness kayaks and by far the Lynx is my favorite platform for fishing, it is worth the money, fast, light and turns on a dime. I do run a power pole and a 7 inch lowrance dept finder with maps and a hobie crate with a dry bag in side and carry 4-6 rods all the time with a fish bag on the front and put 2 8x14 plano boxes under my seat, I got 2 pocket organizers on both sides of my seat, which hold my fish sent and couple rags. also have seat raisers and removed both straps that were usless and added a large cup holder where the right handle was., I woulden't trade my setup for no other kayak on the market today, I love this thing for fishing on any water fresh or salt, I have caught hundreds of fish with it in the last 2 years., don't worrie about the scratchs on the bottom, there are 4-5 layers, this kayak is unsinkable, never worrie about a rain storm ao large waves, you won't regret buying one, I keep it fully loaded and slide it in to the back of my ford ranger and I can launch just about anywhere i can get my truck to. you can peddle this kayak all day at a low med speed with out getting tired, because it sits on top of the water not in the water.

GREAT video!! QUESTION: where and how is the drain connected? Is there a drain line that goes all the way thru the hull?? If so, does the cooler take on water while under way? The live wells are famous for water coming in.... is this Mod the same? Probably a good idea to add a part 2 and address drainage.

After watching this video I think I am going to go with this yak

new to all of this... do you always deflate your bote or leave it inflated?

I wish you went more in detail about how to strap it up 😢

I just bought a Old Town 120 AP a few days ago and everyone I asked said there wasnt any landing gear for them, even though other heavy (heavier) kayakays have them. I know this video been up awhile, is it still working for you and no issues?

Perfetto!!! Fatto!!!

THANK you!!!

nice mods, I just bought mine in virginia also. How much of a pain was it to register and title the yak?

By chance would you still have your clear port I could buy off you?😂 I lost mine, if not how did you go about measuring your starboard for correct cut size?

You think this would hold up for use on shallow rivers and creeks?

If I could walk my kayak that would be great

Nice

crap now iam worried am about couple days away from purchasing a used one, now i know what to look for thanks

I have this kayak. A lot more expensive now. But I absolutely love it. I have a 100ah lithium iron battery from Renogy with the Bluetooth interface. Full throttle I can go about 3 hours. But you never do that. I do full throttle to where I want to get to. Then I slow it down. I get a whole day out of it with battery to spare. It is wonderful both for fishing and photography. It’s so quiet what you want to photograph doesn’t fly or run away. And you can get in anywhere. I did discover you can leave that rear lock on the motor unlocked. Then if you hit something it just pops up and pops the kill switch while it does it. It does have a fair amount of draft due to the skeg on the motor. So on the shallows I just pop the motor and paddle. It paddles fairly well. You would not want to paddle it a long distance.

there was no drain hose under that ? just picked up mine yesterday gonna try it soon

Igloo makes a pretty good cooler, superior to Coleman anyway. You can even get parts for them like hinges and latches.

what about 2 piece kayaks? i want a kayak that fits inside of car 😂

Super nice mod! Really nice

Do you know where the HIN number is located on the Aero? I just bought one and idk where the HIN number is located on the note.

On my 195 i had to turn the cooler around for it to fit. Didnt have to cut anything. Cooler works great! Well worth the 20 bucks.

You didnt show how to strap it down!

Great video. Just got a 2020 175 TXW and the ice lasted maybe an hour, this will be perfect. Where did you get the new drain ?

Awesome idea. Gonna try it on my pro 190

Traded my 120 Auto for the 106 Powered by MK. The 106 works much better for me,

Hey how fast does it go? I have a 3.5 2 cycle on mine and it’s just too loud

Brilliant! Now I know what to use my marine matt remnants for. thx

Bro!! At 3:05 what is the pin called? Mine is missing that and it won’t steer at all. I’m going on 4 trips and ive been trying to figure out what is wrong.

What paddle is that? It’s sick

Can you show closeup pics of connectors coming out of pontoons?

What seat are you using? Looks comfortable.

will this work the same on the 195 ?

Great video! I think this is my next rig!

Great video! Thank you for posting.

I have been thinking of ways to upgrade the cooler on my boat. Thank you for this.

Do you need any additional tie downs for front and rear of the kayak? Or is the two in middle of the kayak enough when transporting?

Great video! I just finished mine. I didn’t have to cut the cooler’s handle mounts, I just did as you suggested and used a screwdriver to help slide it in. Also, showing where the screws were located was a big help on a couple of them 👍

Excellent review. How is it going since you made this video?

My upgraded sail rudder sits slightly below the hull size so when kayak sits the ground it rests on the edge of the larger rudder. How did you prevent this? Cheers Matt

Very tasteful hack. I don't have this boat, but on my bass tracker, I end up using 48 quart cooler and use it as a live well as well as a cooler. I did the exact same thing with the phone insulating top and that thing is better than the live well that comes on the boat.

Great idea and a good job!

Looks great. You can also drill small holes in the sides of the cooler walls and spray foam insulation inside the walls. This will insulate the cooler even more.