Welsh Black Farmer

Пікірлер

@ErenDoppleganer 2 ай бұрын

It’s not black.

@bl4565 5 ай бұрын

do you like that Idle it sounds really good??

@bl4565 5 ай бұрын

Fergie Sorry

@bl4565 5 ай бұрын

wow is it the old Fargie i heard in the background.. It runs so great.. Best regards J.

@richardhughes6353 5 ай бұрын

Thats the 165 in the background I had forgotten about this video it was taken on the same day as the other 2. glad you enjoy

@bl4565 5 ай бұрын

Yes it sounds Great all over the video. But the Idle in the end is best.. Best Regards J.

@bl4565 5 ай бұрын

Thanks for the answer.. I hope to hear an really Low idle engine Fergie or other.. Best regards J.

@bl4565 5 ай бұрын

Nice it starts and Runs good.. Do you have an engine or tractor that can runs really low at idle It sounds so good.. Best Regards J.

@richardhughes6353 5 ай бұрын

Hi thanks for the comment the only one I have got is starting the grey fergie at the moment but I will consider making a video with just an idling engine

@brianmarshall1637 6 ай бұрын

I have the same mark and model ,frosty weather heater plug and away she goes.

@punyaps 11 ай бұрын

Can always tell whether in the USA or Europe. Count the shields.

@Jwp714i 11 ай бұрын

My fathed hac a 165 for years also and was a great tractor for us , brings back many fond memories watching this , wd used a MF square baler also , always remembef the shear bolts goinb in it and having to make replacement wooden fingers for it 😊

@bl4565 Жыл бұрын

nice it runs Great best regards J.

@bl4565 Жыл бұрын

Gratulate With the Calf it looks Healthy.. Nice John Deere Coverall i have the same.. Best Regards J.

@albertozannoni9914 Жыл бұрын

Anno 1978. Anche io imballavo con MF 165 e Welger AP 42.

@kevinconnolly2450 Жыл бұрын

B 46

@razmangeorgelucian5511 Жыл бұрын

Hi. I also have a model, Massey Ferguson 135 made in 1978 that's still working on the fiels and I have a problem with it. May be you encountered it also and you can give me some clues (or some indications) how to approach this problem. My tractor haze a problem with hydraulic system. It's lifting the plow or other weights with the tie rod (three point hitch), but when I stop the engine, or when I push the clutch pedal the weights are going down. If there is nothing in the tie rod and I stop the engine the tie rods are staying up for one or two days, time in witch they are slowly coming down. Can you tell me if this problem is occurring from hydraulic pump (valves etc.) or it's from hydraulic piston (the segments of the piston head need to be changed)? The rest parts of the hydraulic works ok, the pto is also working fine. One thing I noticed that when I start the tractor and I lift a plow (for example), it's lifting it more quickly when the oil inside is cold and it's taking a little longer to do that after I'm working (plowing) with the tractor and the oil temperature from hydraulic system is higher. Thank you verry much!

@richardhughes6353 Жыл бұрын

I take it you have got the oil control valve fully open. On my 165 its the round handle for the oil control valve and the square for the hydraulic operation. Mine comes down after the engine stops but I always have a lot of pressure when operating the hydraulics when hot or cold. The problem you have could be The grade of oil you are using for example it might be too thin because as it heats up it gets thinner or it could be that the hydraulic pump isnt delivering the pressure to the hydraulics as it should. I have other suggetions if required.

@razmangeorgelucian5511 Жыл бұрын

@@richardhughes6353 Hi Thank you very much for your answer. Indeed it's possible to be the oil, I haven't changed it since I bought the tractor. It's my first tractor and the gui that helped me when I purchased if told me that the oil looks fine. But now I see that also it's collour is changed. So first of all, I'll try replacing that oil and when I drain it I can also check the levers, oil filter etc. Can I test it with that "side covers" open?

@briangallagher1235 Жыл бұрын

If i have to feed outside i tip the bale onto a pallet.

@briangallagher1235 Жыл бұрын

Slow, but good solid bales by the look of them. Is that a round axle big engine Mk11 165

@richardhughes6353 Жыл бұрын

Thanks for commenting it is a round axle 165 im not sure about the MK but the engine is a four cylinder diesel perkins A4 212. This was my first time ever bailing for starters and the bailer had been standing for around 10 years. If i remeber rite I was bailing in 2nd or 3 on the Lo box

@paulthompson8467 Жыл бұрын

@@richardhughes6353 we have exactly the same tractor on our small farm in Ni great machine your baler is making very good solid bales 👍

@briangallagher1235 Жыл бұрын

You should try cutting the plastic off the bottom of the bale before tipping it.

@richardhughes6353 Жыл бұрын

Thanks I might in the future. The reason i leave the plastic on the bottom of the bales is so they wont absorb moisture from the wet ground, I found the cattle eat the contents a lot cleaner. I usually feed them small square bales

@lleynmodelaeroclub9029 Жыл бұрын

As I heard the air ambulance wont be flying from here for much longer they are moving it closer to central wales

@lleynmodelaeroclub9029 Жыл бұрын

shame the air ambulance is not going to be here long. North wales is loosing its biggest asset

@johnjones5516 2 жыл бұрын

Nice to see the old tractors earning their keep

@richardhughes6353 2 жыл бұрын

Sure is!

@richardhughes6353 2 жыл бұрын

Thats what most of my farming is all about im trying to keep the old fashion methods alive

@johnjones5516 2 жыл бұрын

Love the way the footage goes from modern to old at the second half. Really fits the video well

@richardhughes6353 2 жыл бұрын

Glad you liked it!

Ең жақсы KZbin

Пікірлер