Жыл бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@deals2sale Ай бұрын
Great video! Could you create one that demonstrates how to drill multiple holes in a 5-axis setup using the 5axis option pls.
@Mokkisjeva Ай бұрын
Unreal how I spent about 2hours yesterday shouting at Vollumill for not understanding that I have made a hole for it to plunge into. It did not want to enter the hole no matter what. Turns out I had to increase the drill size by quite a bit in order for Vollumill to understand it could plunge into the hole. I haven't tested yet, but does this method make it so you can use a much smaller drill? The example I was working with yesterday was 8mm endmill and I wanted to predrill a 10mm hole. It wasn't until I made the hole 13mm big before Volumill figured out it could plunge without helix down. Man that was frustrating.
@deals2sale Ай бұрын
I believe GibbsCam should create more videos like this to help people better understand the software, as there is currently limited training available for Gibbs.
@alisongilmartins517 2 ай бұрын
Top demais, você teria um curso de 4 eixo rotativo, obrigado pela aula.
@JRH2830 2 ай бұрын
Excellent video... What version of GibbsCAM is this feature on may I ask?
@midwestcamsolutions 2 ай бұрын
Glad you found this tip helpful. It's been a feature in GibbsCAM for over 10 years! It was shown here in GibbsCAM 2024, but it's been around for a long time.
@Baseballkid88 2 ай бұрын
Hi, do you have a post output strategy that allows machine to position for 5 axis drilling without using tool center point control? Usually we have to create planes so the post outputs g68.2 (tilted workplanes) because canned cycles are not compatible with tool center point control. Makes the hole manager less helpful when you still have to create planes for every hole with a different alignment on part. Thanks
@midwestcamsolutions 2 ай бұрын
Thanks for your question! We'd love to help. This question is best answered by your local GibbsCAM reseller. If you are a Midwest CAM Solutions customer, then would you please submit it here? share.hsforms.com/1-xBMkGwLRgyBv0viRpGyDAc01ys We'll get you an answer ASAP.
@godtattoomachines 4 ай бұрын
So, when you touch stock you should up offset on .25? For each part?
@ColonelKlank Ай бұрын
When you probe the top of the stock, you will set it to Z0.250”. That way, when you finish your face milling, the top of the part will be Z0.0”.
@eddie5556 6 ай бұрын
Awesome info, thanks. I didn't know that it would return the top of a face with the Top Of Part field active, and the bottom when Cutting Depth field active. Or the angle with Cut Angle active. Good stuff, thanks
@midwestcamsolutions 6 ай бұрын
So glad you found it helpful!
@cncmilljunkie 7 ай бұрын
How well dose the hole Manger work when the holes are not modeled correctly in your part? It’s not uncommon for me to get a model and some taped holes are modeled to the minor diameter and other to the major diameter. Heck, sometimes the drill depth for the thread holes is only 0.030” deep while the tap depth is called out through the part. Also, when working on weldments, some holes are thru the top plate while others interfere with the wall of the tube welded underneither. How would one handle that situation?
@midwestcamsolutions 6 ай бұрын
Thanks for your question! As you might imagine, the Hole Manager is only as good as the information in the solid model. So, it sounds like some editing of the model would be required to get the output you would want.
@cncmilljunkie 5 ай бұрын
@@midwestcamsolutionsthat’s what I was afraid of…… Unfortunately we do work for with customers that provide us with prints and models, so I can’t control that, but for our parts we engineer in house, maybe I can talk to the engineering team here. It you don’t mind me asking, how does the TPI/pitch field get populated. The only I get get this to populate is if I manually fill it in by myself. This video did inspire me to start learning about the hole manger/AFR. One problem that I ran into however is when I set the in-between position in my process to ‘hole feature’ my posted code dose not match my machine/Op sim. Will this require a post update? On the bright side, I did develop a macro that will sort the holes using the hole manger and apply a hole process to them. So far I have 25 holes identified. On the parts that I made it for, it reduced my hole programing from 35 mins to less then 7 mins. There is still work to be done to make it better, but it’s a start. With that being said, could you make a video on how to set the AFR sorting settings using the macro. I find the Gibbs macro wiki site to be quite vague in this area. The wiki site will tell me that the command for setting the AFR_CS_mode, but does not describe choices I can pick from among other things.
@IÑAKIURRUZOLAZUBIRIA 7 ай бұрын
very good🤩🤩🤩
@eddie5556 8 ай бұрын
This is pretty cool, thanks for making this video. Super simple way to do rotary work. It looks quicker and cleaner than the 4th axis module.
@midwestcamsolutions 8 ай бұрын
Glad you found it useful!
@balisticsrooster 10 ай бұрын
Thanks!!!
@Avahenry2346 11 ай бұрын
They would not understand. One of the best software. Great
@Andrey222ful 11 ай бұрын
Changing tool length offset in the program is a "great way" to crash the machine. There would be one "special" CNC operator that would not catch the change and can crash the machine. If I need to change anything like that, I would use a spring pass, if it doesn't help than modify the part sequence in the control.
@midwestcamsolutions 11 ай бұрын
Thanks for your comment. A message has been added to this video reminding programmers that if you make changes to offsets, then that information must be communicated to the set-up person/machine operator. Communication is key to avoiding issues like that!
@oulinsaeteurn9078 8 ай бұрын
If I have problems with depth. I use the same tool to cut both features. This way I know it will always be there. Depending on the part . Sometimes u have to straighten or bend back to form
@homer4889 11 ай бұрын
Hi, could you please make a tutorial of step by step on building machine sims. Thank you for all of your tutorials.
@deals2sale Жыл бұрын
We need more videos like this ASAP
@deals2sale Жыл бұрын
This is the kind of videos us newbie’s need to better understand Gibbscam. This videos get 100 like from me.
@midwestcamsolutions Жыл бұрын
We're happy you found it useful!
@eduongvan1460 Жыл бұрын
Anh ơi anh làm video lập trình 3D trên Gibbscam 2018 2019 đi ạ.❤
@eduongvan1460 Жыл бұрын
Anh ơi anh làm video lập trình 3D trên Gibbscam 2018 2019 đi ạ.❤
@MrSpiderfire Жыл бұрын
Where can these macros be found?
@midwestcamsolutions Жыл бұрын
Check with your local GibbsCAM reseller--they will be happy to help you out!
@luizfelipegirardi5516 Жыл бұрын
Wol 👏👏👏
@JohnMuldowney-vt9zy Жыл бұрын
Not where I would expect to find a function like this in the menu. It is also a bit convoluted to set up - though not hard. It did work and got the job done, so glad to have the functionality and a video to explain how to use.
@israelmartinez2027 Жыл бұрын
C16 k16 processors?
@clofstrom1488 2 жыл бұрын
How do you solidify that facet body so that it is not transparent stock on the next operation?
@Wilson-cv1vl 2 жыл бұрын
ᎮᏒᎧᎷᎧᏕᎷ
@MrDanish2 2 жыл бұрын
i need your help can you please?
@deals2sale 2 жыл бұрын
Thanks for the videos very helpful
@jonathanviterise1681 2 жыл бұрын
This is phenomenal thanks for the tip
@midwestcamsolutions 2 жыл бұрын
So glad you found it helpful!
@nvrfollowb5 2 жыл бұрын
I can not get this to work. I might be downloading the wrong file? I get error message in GIBBS: "Invalid Post Package. A post Package must contain a .pst, epst, .mdd, or .vmm file type. Looking for model for HASS ST30Y
@brijeshyadav28 2 жыл бұрын
Goods
@TheDefeatest 2 жыл бұрын
Just wanted to say thanks for this video. I've watched it many times and keep learning from it. Cheers.
@TheDefeatest 2 жыл бұрын
Thank you for this. I run into these open slot parts quite a bit. Is there a better way than creating a line down the middle to do this? What process could you use that would cut the slot and extend past the ends a bit, yet staying accurate to the sides? I've really struggled with this and feel like I have to so the draw the line method to do it. Feel like there's a way I'm missing. Thanks and hope this doesn't come off as not appreciating this method.
@geraldmckee4423 2 жыл бұрын
Another option is to use Volumill. I prefer Volumill it is quicker and easier. If you need help with Volumill contact your reseller and they can help you.
@cristinelpricop 2 жыл бұрын
Why this option is not working on 5 axis ops? The is a material only check box but it's not working.
@geraldmckee4423 2 жыл бұрын
Cristenel, I am able to use it with 5 axis ops. If this still isn't working for you please contact your reseller. They should be able to help you resolve the issue.
@cristinelpricop 2 жыл бұрын
@@geraldmckee4423 I will. Thank you for your time.
@pks4114 2 жыл бұрын
감사
@TheDefeatest 2 жыл бұрын
Thank you very much sir! Very helpful.
@anandkrishnan5342 3 жыл бұрын
I want this software....
@byronkersy5720 3 жыл бұрын
Cool video man. Very informative. Any chance you can share your post processor for all citizen swiss type lathes?
@sahbidhifallah2532 3 жыл бұрын
Le bon methode de travail faire les perçage puis faire ebouche de sphaire
@rajanpadaridya9781 3 жыл бұрын
can we program for wire cut edm in MASTERCAM?
@lilchirp4846 3 жыл бұрын
so how would you “actually” efficiently program this part? would’ve been an interesting bonus at end of vid...
@eddie5556 3 жыл бұрын
Thanks a ton, a lot of little details i never saw or simply forgot.
@kashifq6504 3 жыл бұрын
Just learned something very kool. Thank you !
@adyx_xd 3 жыл бұрын
There is a Volumill process option. It is better to use.
@antoniorguez2932 3 жыл бұрын
How can I download some step fil til practice? That's nice explaned with some good tips.
@cncmilljunkie 3 жыл бұрын
I knew of this trick this this trick for quite a some time but never really felt I had a good application for it. Just recently I had the mod a heat-treated part and relied on this trick to get it done. Two days later, this video pops up. How ironic.
@tylerjohnson6633 3 жыл бұрын
Very Helpful!
@TheDefeatest 3 жыл бұрын
Hello there. Thanks for the video! Quick question if I could. If I import or create a solid model in Gibbs, how can I see that solid model when it comes to the simulation? So , like if I wanted to bring in a part that just need chamfers on different levels, how do I simulate it so that I see the model the whole time? So that I don't see my tool plunging through material that isn't there (because the stock dimensions will be a cube) ? I hope this makes sense.
@MCITECH359 3 жыл бұрын
hello, can you with me your post processors files and ncf files?
@juniorvieira3901 3 жыл бұрын
I guess he wont do that
@maisiecampbell5978 3 жыл бұрын
Quality Energy ❤ free samples - #MusicProducingBuildTrack
@shawverejack8278 3 жыл бұрын
Neat Stuff 💗 call out #MusicProducingBuildTrack
@jenniferjlentz7501 3 жыл бұрын
Nice Work 💙 shout out #ProducerSamples4Free