Excellent video - straightforward n' clear. The only deviation I did was to completely remove the fuel cap and gently shake my rancher with the fuel tank opening pointing down and the remainder of the broken hose fell out. Handy if you dont have some offset needle-nose pliers or your needle nose pliers just weren't long enough to grab the broken piece of hose. Good stuff man - keep em' comin'.
@MattMan3624 күн бұрын
@@deandrummond8125 glad the video helped you out, thanks for the feedback !! 👍🏼
@jeepcj3b4365 күн бұрын
great video. Thank you. Mine has been leaking almost from the day I bought it and its been a real pain with oil leaking all over the bed of truck, garage floor, etc.
@johnwagner66629 күн бұрын
Thank you for your effort. A great help.
@MattMan3628 күн бұрын
@@johnwagner6662 you’re welcome, hope it helped !! 👍🏼
@WORKAHOLLIC-hz8eg17 күн бұрын
Best video explanation on how to fix this problem. Well done!! And thank you!
@MattMan36216 күн бұрын
@@WORKAHOLLIC-hz8eg Thanks for watching !! 👍🏼
@CT-rf1jh17 күн бұрын
Also, when i bought my 450 rancher new, I'd assume that the saw sat on the shelf at the store for so long, it dry rotted, only used it 3 times, oil leaked everywhere
@CT-rf1jh17 күн бұрын
Gonna take mine to a shop, good video tho
@MattMan36216 күн бұрын
@@CT-rf1jh Thank you!
@joshsoudersАй бұрын
Absolutely fantastic video
@MattMan362Ай бұрын
@@joshsouders hope it helped you out 👍🏼
@renegagnonfineartАй бұрын
Wow - this was amazing. Link to full line and all. Thank you so much.
@MattMan362Ай бұрын
@@renegagnonfineart your welcome man, hope it helps you out 👍🏼
@Brad-RBАй бұрын
This is very helpful. I'm curious if a B2601 with a loader and backhoe will fit in my shed. With the hoe to the side, the length will fit. Do you know the width dimension with the hoe to the side?
@MattMan362Ай бұрын
5:45 should answer your question
@cyrusorduna729Ай бұрын
This was an awesome tutorial!
@MattMan362Ай бұрын
@@cyrusorduna729 thank you 👍🏼
@arboleda08Ай бұрын
Great video. Right on the money. You saved me about $150.00. Thank you.
@MattMan362Ай бұрын
@@arboleda08 glad the video helped 👍🏼
@roadglide11422 ай бұрын
Don’t understand why you would use a grapple to fill in a hole & not the bucket ? 🤷♂️
@chuckgilbert20352 ай бұрын
both calipers come together when you ordered them?
@MattMan3622 ай бұрын
@@chuckgilbert2035 I don’t know if that’s the case when you ordered them, I picked them up directly from the Scagg dealership
@Larry-d3i2 ай бұрын
It would be hard to improve on what you did in this video. The alternative is to spend probably 50 to 100 dollars at a repair shop to replace a 2 dollar fuel hose. It is a time consuming job that requires some patience and hand skill with the small parts, so not a job for everybody. Big thank you for the fine tutorial.
@MattMan3622 ай бұрын
@@Larry-d3i appreciate the kind words, hope the video helped you 👍🏼
@Zwrld7812 ай бұрын
What size trailer?
@MattMan3622 ай бұрын
@@Zwrld781 I have a video on trailer size for this tractor and different attachments, check it out below 👍🏼 kzbin.info/www/bejne/m2Ovda2ei7SFaaMsi=EEpRVixYmJVmK8nF
@aubturner66332 ай бұрын
Easy to understand.clear instructions..very good
@MattMan3622 ай бұрын
glad it helped
@soldierkirk3 ай бұрын
Matt you’re the man
@MattMan3623 ай бұрын
@@soldierkirk Thank you!, hope the video helped you out 👍🏼
@Drewsroofingandhomerepair3 ай бұрын
Very good video
@MattMan3623 ай бұрын
Thanks, appreciate the feedback 👍🏼
@aaronburford57013 ай бұрын
Absolutely love driveway repairs or refreshes. The Box blade is one of my favorites. I enjoy for some reason. liked, Viewed, subscribed and shared! Need more of!
@MattMan3623 ай бұрын
Glad you liked the video and thanks for subscribing 👍🏼
@corryluckenbach11503 ай бұрын
That was awesome buddy. One of the best youtube instructional videos I've ever seen. Thanks so much!!
@MattMan3623 ай бұрын
You’re welcome, glad it helped you out 👍🏼
@rburbank9933 ай бұрын
Thanks! That helped.
@MattMan3623 ай бұрын
Glad to hear
@SteveB26014 ай бұрын
Great job. You should invest in a 4n1 bucket, it changes the tractor to a Swiss Army knife.
@SteveB26014 ай бұрын
Hey just hit the subscribe button. Good video. I don’t have a backhoe at this time but when I have to bring a bucket, forks, box blade and sometimes the tiller to work on a yard I ended up with a 24’ trailer. I also have a toolbox in front. Now could I get away with a little smaller trailer I want to say yes but I’m so spoiled having the extra room I’m saying no, LOL. I also made my own trail so I didn’t pay a tow for it. So when people go looking size and price matter. And you have to think weight for the B2601, it’s not light when you get everything on it.
@marccaporale96554 ай бұрын
Great video. Was mowing with my old Lesco yesterday with the same engine and started to lose some power and all of a sudden had a popping sound going. I finished and put it up because I had a million things to do but I think the culprit is going to be one side going out and needing a coil pack. Thanks for the easy walkthrough.
@MattMan3624 ай бұрын
You’re welcome, hope it solves your problem 👍🏼
@andreburnett59094 ай бұрын
I just purchased me one. Bow I need to find someone to build me a stand for it.
@howiwatchvideos4 ай бұрын
I would get one big enough to haul your equipment.
@stevestock24395 ай бұрын
Great info. Thanks a ton for all your hardwork, much appreciated.
@MattMan3625 ай бұрын
You’re welcome !! 👍🏼
@marylister69425 ай бұрын
How stupid do you think people are? WOW
@amyg57004 ай бұрын
Yeah! Fuck him for trying to be helpful! You're such a doosh matt!
@HeLIVESinME20245 ай бұрын
mine is not the U joints. i replaced the u joints and still the same slow speed rhythmic clunking
@beardedscrapper5385 ай бұрын
Great video. I like that it was multiple lawns and not just one.
@radiantlawnmaintenance5 ай бұрын
Nice job! I like the way you edited the angles. Keep doing what you doing, can't satisfy all the people all the time! New sub💪🏾💯
@MattMan3625 ай бұрын
Thank you for the comment and support!! 👍🏼
@radiantlawnmaintenance5 ай бұрын
@@MattMan362 no problem 💪🏾
@theallaroundguy23995 ай бұрын
FYI, point of view mowing is horrible. It’s not fun to watch because it does not translate. You’re just watching the front of a lawnmower drive through some grass. The only shots that are shots where the camera is in the yard somewhere and you were mowing the grassand the best stuff is point of view blowing and especially point of view trimming. I think if you would make a lot more point of view blowing and trimming you may see some more views. Not sure. Once again though, point of view mowing is completely useless
@silentxstrike14685 ай бұрын
Get some penetrating spray let it sit then give it a wack.
@NickZ62975 ай бұрын
Only people having this problem dont understand the word "maintenance".
@alexhitsdrums5 ай бұрын
I love how simple you filmed this.. nice job.
@MattMan3625 ай бұрын
Appreciate the comment man thank you !! Lots of time and energy into editing lol.. I guess I just make it look easy
@Kaizen7475 ай бұрын
Miscalculated tree weight distribution?
@StillTheJackyBear5 ай бұрын
nice... (sub'd)
@randys97115 ай бұрын
Every aspect of this video was excellent. The camera work, the camera angles, the narrative, evrything was exceptional. Seriously, you should make many, many more of this type repair video. Keep it up and in time the youtube check will come in every month. Yours was the best. This just wasnt fuel line fix, it was carburetor removal and replacement. It just takes time brother. You are better than the competion.
@MattMan3625 ай бұрын
Hey man thank you, I appreciate the positive feedback,means allot to me !, I am new to video editing and recently have put in allot of time and effort into making videos like this, glad to hear you like the video, I am going to come out with another one soon where I address a common oil leak with this model, just waiting on parts at the moment so I can make the video 👍🏼
@howiwatchvideos6 ай бұрын
Vietnam holmes. Veitnamy
@capecodarbortech6 ай бұрын
Nice top ! You look good up there 👆 🎉 keep it up bud
@MattMan3626 ай бұрын
Thanks man, I was a little rusty, it had been a while since I climbed, still got it done though 💪🏽
@philliphall51986 ай бұрын
Why not replace all the fuel lines ???
@MattMan3626 ай бұрын
Thank you for your comment, the video was just to show how to fix the current fuel leak, hope this answers your question 👍🏼
@philliphall51986 ай бұрын
Love this saw , but fuel lines are cheap crap
@DavidHolder-o3m6 ай бұрын
Hi you made that look so easy very good job keep video coming please David uk
@MattMan3626 ай бұрын
Thank you!!
@drewsmith12006 ай бұрын
how would you have gotten the brake disc off? your fell off , ours is stuff on .
@MattMan3626 ай бұрын
Tapping near the hub with a hammer will most likely loosen it up
@beardedscrapper5386 ай бұрын
9:13 love the replay from 2 different angles. Nicely done.
@beardedscrapper5386 ай бұрын
3:07 I moved my head when that thing was coming. Lol😂
@beardedscrapper5386 ай бұрын
Great video.
@MattMan3626 ай бұрын
Thanks man 👍🏼
@redboyize6 ай бұрын
Just the video I’ve been looking for thanks 👍🏽👍🏽👍🏽👍🏽👍🏽
@MattMan3626 ай бұрын
You’re welcome 👍🏼
@ChaosMakersHobbyHouse7 ай бұрын
Tornado damage? Where was this? And man the hike up there looks so much harder from first person POV lol
@MattMan3627 ай бұрын
This was in Harwich in 2019 lol…
@MattMan3627 ай бұрын
I made allot of climbing videos over the years but never put them on KZbin
@ChaosMakersHobbyHouse7 ай бұрын
@@MattMan362 dang, I didn’t know Harwich got hit with a tornado