Le h sur mon whirlpool j ai changé la pièce blanche sur le côté gauche le distributeur d'eau avec débitmètre temps 30min cout 20€ sur sos accessoires

En français svp….

Try unplugging your tv for a minute or two and plug it back in. Turn it off first

Better way is disconnect cable from sensor and short black and yellow cables.

Wonderful ! thanks a lot for this video, my Landroid is fine now !

Thank you it would have taken me an age to find all those screws beneath all the rotted grass. My problem wasn't the lift error it was that the wheels fell off. kzbin.info/www/bejne/g5S2foqKmJWLb5Isi=NFeZJE1yTBtuUdFr

It worked, brilliant ! I was totally frustrated by this and have sent it in 3 times (!) For service. I had to do both sides, when I did only left side it kept having the "Mower Lifted". And iI also took out the little magnets and taped them directly to the sensor, so without the rubber holder. Thanks for sharing !

Man I just got the same issues this is Bull 💩

works perfect ! I was going to buy another brand, you save this Landroid Works from the bin.

after this i now got trapt error in sted 😂

Did you find a solution for this problem? 😢

Excellent. What about the other wheel? No magnet?

Can i also use a small neodymium magnet?

Merci beaucoup pour le tutoriel !! Enfin le robot fonctionne correctement ❤❤❤

Life saver, thanks buddy

Menteur Y a meme pas la solution!!!!!!

Thanks, now my L2000 works fine. EDIT after 2 months: Do not remove the black plastic with the magnet, only the magnet itself. Without this black element, the wheel's axis loses stability, the plastic wears out, and the wheel starts to jam when moving up or down. Attach only the magnet to the sensor!

My landroid wr165 keeps on stopping on a slight incline (about 20 degrees) by the boundary wire. I put on the wheel spikes and it got much better but still stopping often. Any ideas how i can fix that?

Ou est la solution??je la meme probleme

Great video/information, I also agree that Worx needs to rethink this design as it is way too sensitive and very few will have a lawn that does not trip the sensor repeatedly. Maybe put the sensor on the shell and not on the wheels. This has been so frustrating for far too long. I did alter this slightly however by just wrapping a string around the bottom of the wheel shaft just below the sensor. For some reason mine went back to giving lift error shortly after taping the magnet to one of the wheels circuit boards. When taping them both I got a lift error immediately after powering on that would not go away. I then took it apart again and decided to just try wrapping a piece of string around he bottom part of the wheel preventing it from dropping, put everything back together again and no more lift error. It's been running longer than ever before by doing this. So, thanks for the tip!

Posso sapere la soluzione .Ho lo stesso problema macchina nuova

A little side note in the safety aspect of this mod. “Lift” sensors in the wheels or on the cover are not there to detect if the body of the mower is “physically lifted” . These sensors are there because the shape of the cover is specifically designed to trigger these sensors when the mower runs over your feet. The cover will ride on the foot of a standing person, and since this motion will “lift” the cover from its normal position, causing the casters to “fall down”, the robot will immediately stop the blade and turn away. So this can be dangerous even if no one is lifting up the robot from the ground. A distracted person standing on the lawn when the mower is operating could be injured as the blade will not stop anymore when feets are under the robot body (and very close to spinning blades) Be careful guys!

This worked! Thank you!!!!! Huge adjustment to the Landroid.

looks like you have some hand tremors , do you consume a lot of coffee ? or just a bit stressed , if this gets any worse over time , best to speak to your doctor to check if its just stress

Hey, thank you so much for your solution and posting the video. You saved my sanity and you saved the Landroid from the garbage bin because this problem was driving me absolutely nuts. I had contacted Worx support several times about this issue weeks ago and they still have not made any attempt to contact me that I can tell. The lift problem wasn't so bad until this last firmware update and clearly the people who write the software and/or test it have perfect lawns without any little bumps (grass clumps). I would suspect a lot of people with the lift problem are making this modification so if Worx is indeed using that trigger as a feedback mechanism on their software, they probably think there isn't a lift problem as far as the feedback reporting goes. Oh well, it is working very well now and just wanted to say thanks. Cheers!

Hello, vous savez à quoi correspond l'erreur 11?

Bonjour cest bizarre jai un nouveau lave vaisselle et ca me.fait la meme chose....

Thank you very much 🎉

Thanks for the Good Idea, my Fu... Mower make now his Job. 😅

Wow, thank you so much ! I can't believe it! Solved! Loving it!

Hi, thanks for the video. solved these enoying lift errors! One thing I did different is I removed the cutting disc and metal guard to easily get to that one screw just below the cutting disc.

Thanks a lot. My garden is not a golf green and my robot is making lift compensation every 2m or lift errors 3 times per day minimum. I will apply this immediatly but perhaps put an electronic bypass instead of the sensor

Bonsoir, j'ai le même lave-vaisselle mais moi le code erreur c'est 15 ? Qu'est-ce que ça peut être ?

bonjour j'ai un nouveau lave-vaisselle whildpool wkic3c26.je l'ai connecté mais lors du pompage il a un message d'erreur h. mais c'est une nouvelle machine je voudrais avoir des nouvelles de quelqu'un .merci d'avance

Merci de l'astuce, je viens de réparer le mien, voici la réf. pour info : "Répartiteur avec débimètre Lave-vaisselle - C00256546, 482000022022" 👍

Thanks a lot 🤩🤩🤩I'm so happy now ,no more worries about that pice of shit from 1200$ that's always stuck with lift errors . You helped saving me from buying a new one (no more worx)or back a lawnmower

On veut la vidéo de solution! Videaste paresseux qui s’appuie sur l’aide de la communauté 😜

Eh mais y’a pas de solution 😭 quelle arnaque! 🙀

T’es un KZbin tech! 😁 ça le fait 👍🙂

Thanks for the tips. I just took the actual magnet out of the little black plastic clip, wrapped a layer of electrical tape around the pc board sensor to resist shorting it. Wrapped the magnet in a few more layers and covered it all with a piece of duct tape. Ran all day no issues. That is a rarity, Thanks Again

bonjour, pourriez vous donner la ref de la pièce ou une photo? Merci

Hi! I'm thinking of doing this myself as well, thanks for the thorough instructions. Is there a warranty seal of some sorts that would be broken when opening the mower this way? And also, do you really mean that if you power on the mower without the cover, then it "won't ever start", as in, even if you put the cover back on?

I have made modifications to my Landroid to add night lighting effects. It was a fun project (as seen here kzbin.info/www/bejne/fYTRm3yMpL17Zsk). When I got the unit completely assembled I had trouble as the robot just made continuous circles. Thinking I had messed something up was causing me to panic. I remembered your video and saw a message on the control panel that said 'executing wheel lift maneuver'. After disassembly (not easy) I found one of the LIFT sensors has slipped out of its bracket. After remounting the sensor all was well. Just wanted to shout out to you a thanks as your video was very helpful in my project.

Thank you so much for this video! It took me about 30 minutes and has totally solved my lift errors!!! FYI I used small zip ties and did both of them just in case one came loose. Great job!

Let me have one large pepperoni pizza, hold the phalanges.

Danke für das super erklärte Video. Nach der Installation und dem mühevollen Verlegen des Begrenzungsdrahtes war es ein Schock, daß mein Worx L 2000 noch nicht einmal von der provisorisch installierten Ladestation ohne Fehlermeldung gefahren ist. Danach nur Problem mit Fehlermeldungen. Wie beschrieben habe ich "Mährta" fresiert und siehe da, sie läuft ohne Probleme. Der Kontakt mit dem Worx Kundendienst bot keine Lösung außer meinen1000qm Rasen einzuebnen. Andere Fabrikate in der Umgebung haben dieses Problem nicht. Es ist so schön zu sehen wie "Mährta" einfach ihren Job macht. good job👌

Hi. My french is not good. What was the solution?

What display marquee is that you are running?

Thanks. Im looking forward to seeing the end of the lift errors!

I recommend a magnetic bit holder. I can't watch this any longer, it makes me aggressive.