I’m sitting here and watching this then realized it’s you Wayne! Getting ready to install one of these in my new rig, I have a 2024 Tundra with an Alu Cab mounted on back.

Great video! Thank you! 👍

Cali raised should be embarrassed. I just bought the premium and it didn't come with instructions or anything it didn't even come with a reference chart for the size of the bolts

Not sure you should use a GL-5 fluid in the transfer case because there's a synchro in there. GL-5 is not good for synchros. Although I see many people do it. From my research, Ravenol 75w or Redline MT-LV would be correct options for the transfer case.

Are you able to change the color of the buttons, and at night when you turn on the headlights, does the screen dim as well?

How much does it weigh as is in the video? Trying to estimate payload when it’s done.

looks laggy

U can buy 1 bag and get the quarts cheaper

Thanks for the excellent video. I bumped into a rock, and the cheap plastic bumper was damaged. Ironically, I did the same thing in my 94 Tacoma, and the rock chipped. Your instructions were excellent and helped a lot to repair. Pretty easy except the pad was a little harder getting the clips to loosen, but with persitance they came loose. In the end, every thing fit back in place. Thanks for the help. Oh, by the way, I moved the rock.

So you can use 75w-85 or 90 on transfer case!

Lol!! I am at the 3rd version of my square drop camper design using sketchup, you made me go for a 4th. Loved your fenders design. Any experience share after using the frame bolted to the trailer instead of welding? Did you use a specific torque?

So theres no need for a 2ndary button to install like R4Ts kit? It automatically works directly off of the steering wheel control's?

'Sup W! Looking good! Hey, ever notice how sometimes the cruise control on your 890 just turns off? I had noticed it sometimes in the 3 years I've had mine, but it wasn't until the other day when I had it out that I figured out for sure what was happening and was able to consistently repeat it. I don't know if this was intentional or accidental on KTM's part (safety thing?), but, if you have the cruise on, and open the throttle to pass someone, and instead of just opening your fist and letting the throttle close on it's own, you roll it closed and accidently go just a little past closed, it will turn the cruise off, every time for me. Sometimes when I take my hand off the grip to stretch, if I'm not careful grabbing it again and accidently roll it a little past closed, it will turn off. So, be aware, that if yours is like mine, it will shut off the cruise if you're not careful. My BMW doesn't do this so that's why it took a while to figure it out, I thought it was just another KTM glitch. Try it out and see if this doesn't do the same thing on yours. Oh, and did you flip the mount on the bottom of your tankbag around so the opening is towards you? Ride safe! F

are the front and rear diff both using crush (expandable) washers? or are they the flat washers like the main engine oil drain bolts?

-51°F??

I believe the transfer case has a recommended oil toyota has

How well does ir do in cold weather?

THANK YOU

Do I have to remove my after market skid plate to do the front Diff?

Dónde puedo comprar ese kit completo Para mi Tacoma 2017 Espero su respuesta gracias

Still relevant and helpful thanks for posting

I'd seen one of those two products before, but not the other, thanks. Certainly would be much better.

I like it, but the exhaust pipe should never outlet under your trailer. The exhaust end pipe has to be located to the side to avoid potential carbon monoxide build up that could potentially creep up into your cabin. Please drill a hole or route it past your I beam.

Where did you get the vent rings. Or did i come w it

I’ve had mine for a few years and it recently started flickering and going black on the front camera. I replaced the front camera and it still does it. It’s unreliable

Is there anywhere I could buy something like this? I don't have the tools to cut or drill what's needed, but would gladly pay for one!! I want to be able to swap between my lock n roll and a standard ball coupler for some vehicles that have an integrated ball hitch that can't be changed.

How much is it

isnt the oil 75-85 not 75-90

Thanks for that

How much does the camper weigh?

With those bags though you can use their own straps right through the ones on the side of the rack. That's what I was doing on a bike. Unhook them on the sides, loosen the straps a bit and run them through the rack.

I would think you'll need to run the cross bar to connect your timbrens together or you are going to twist your frame rails, even with gussets. There is nothing stopping the twist action. That is a lot of weight and it creates a lot of leverage . Your frame rails were flexing just hitting the bolts with the hammer. Add the 2x2 cross bar to connect the timbrens. That is exactly what it is for. Just some friendly advise. Especially off road, the load is magnified from the constant jouncing.

What is the point of Overlanding combines selling equipment with poor instructions?

Thank you so much! I only needed to remove my damaged one for now but tog made it real easy for me.

Ay bro i changed everything cuz why not but now it idles up and down whenti turn it on

Thank you.

San maka order ng motorcycle tank bag,

Nice! I need to come up and maybe SaschWho in his Hummer and I (picked up a '24 Colorado ZR2 in March) can go do this with you guys. Tell Nate hi for me! F

Very similar to the Norden 901. Thanks for putting this together.

My 2022 Tacoma is only 2WD. Does that mean I only have to worry about the rear? Or do I have a front fluid? Sorry if it’s a dumb question but learning to work on my own vehicles than go to dealership!

Does it work with seat heaters? How does it look with 360 camera? Does the front camera have that black bar thing in the middle?

Is there any risk to doing it by hand versus actually measuring the torque? Also, do you know why people are saying that this is the toughest DIY? It certainly doesn’t look that way.

Thinking of getting one.. how are you liking it so far??

Do they make an attachment for the Royal Enfield Meteor 350? That Micro tank bag would be perfect on the Meteor.

20240921, I replaced my 3rd brake light. I too had brought my truck for their recall "fix". I didn't notice right away, but the lens had cracks. And after doing the diassembly to remove the light I realized Toyota had not done this. They simply added sealant. Perhaps for the making of this video, you make it look easy. THIS IS a tough challenge. I did remove the B pillars to pull down the headliner enough to get my 1/4" rachet and socket. And I used blue scotchbrite with Goo-B-Gone to removed alot of sealant. I don't work fast so, I took ~ 3hrs to do the job.

I got this too, cant figure out how to wire the reverse camera. Any advice?

Where did you get the hub cap?

Nice video, question? Any idea how to remove the 4gen trdsport hood scoop?

On the front differential a friend of mine uses a torch to apply some heat to it comes right off , it worked great when I was struggling to get mine off👍

I went with the AGT version for a few months because I use a 40 oz hydroflask. It was nice for that but smaller bottles were too loose and I didn’t like it. I ended up going back to the factory cup holder and buying a 40 oz bottle that fit in a standard cup holder.