For flashlights that have too much recoil and flip
@TweakRacer2 күн бұрын
No expansion chamber
@memedealer1714 күн бұрын
When are y'all going to make a tlr1hl version? Im excited.
@jayphillips36810 күн бұрын
Just installed my gen 2 comp on my LTT PX4, Vantage Point replaced my gen 1 comp at no cost to me, that is what I call customer service!!!
@maxximus201213 күн бұрын
Just got mine installed on my LTT, love it! Please come out with a 92 version and support for the TLR1 or TLR9 if possible!
@VantagePointArmory11 күн бұрын
We appreciate your support! I will pass your design requests on to our design team.
@fmjmanarroyo134213 күн бұрын
Do these work for the X carry frame or the M1811 frame?
@VantagePointArmory13 күн бұрын
Thanks for reaching out! The Comp should work with the X Carry Frame as well.
@thecajun0614 күн бұрын
Where did you get your torque screwdriver and hex keys
@heyjohnson553523 күн бұрын
Just found your video i been searching for a bolt on comp for my springfield xdm elite 10mm. I usually run oolights under my barrels but the one u have on this is in a set location but the one i like the best for pistols has that ability to slide back against your trigger gaurd after u connect it to the rail before u lock it it rides on a slide that goes a half inch foward and backwards. I think its the oolight Knight but i gonna have to take a look to know for sure. Are these caliber specific like when ordering u pick from a list or are they all reamed out to a 45 hole? Been looking for one specifically for my springfield and could never find one cause i kept forgetting the most important word universal. Have u messed around with the size of your gas release point on your comp like if u made one with a oversized hole for the gas to travel upward out the barrel from would it change anything or is it like a plateau once gas gets going upward the hole size doesnt change how much recoil is suppressed or does a smaller opening actually make it hold the nose down better cause of higher pressure or something. Figure u prob tried 20 different hole sizes before u came up with the final product was just interested to know what u discovered cause it seems pretty interesting to me so thought id ask.
@VantagePointArmory17 күн бұрын
Thanks for reaching out! We appreciate your interest in our products. Our compensators are indeed caliber and gun-specific, designed to provide optimal performance for each setup. And yes, we tested the size of the hole for the gas to travel and optimized it based on our testing. The size of the gas port plays a crucial role, and after extensive testing, we found the perfect balance to effectively reduce recoil and muzzle rise. While we don't currently make a compensator for the Springfield XDM, we appreciate your feedback and will pass it along to our design team. If you have any more questions or suggestions, feel free to share!
@heyjohnson553517 күн бұрын
@@VantagePointArmory appriciate that maybe one day theyll be one for the XDM elite at which time I'll be back.
@DTcl6dwАй бұрын
Hello my tlr7 screw broke off in the comp can you help.
@VantagePointArmoryАй бұрын
Thanks for reaching out! Please send us an email [email protected] or give us a call (260) 478-8722 and we will assist you!
@LA6507aАй бұрын
This explanation exactly describes the issue I have with my Gen1 comp but I never experienced the wishboning of the comp rails, thankfully. I replaced my retention clamp screw twice (about 250 rounds through my PX4 between replacements) so yeah, I'm excited about the Gen2 comp because the Gen1 made a big improvement with my follow-up shots! I love the design and function of this Comp and the subtle change in the flush fit looks so fly! Thank you VPA for standing behind your product! That level of commitment makes customers for life!
@VantagePointArmoryАй бұрын
Thank you for your feedback and support! We’re confident that the improvements in the Gen 2 comp will provide even better performance and durability. Your satisfaction is our top priority, and we appreciate your understanding as we continue to enhance our products. If you have any further questions or need assistance, feel free to reach out. Thanks for being a valued member of the VPA community!
@logdog4010Ай бұрын
Been waiting on this, when will it be available?
@VantagePointArmoryАй бұрын
We are looking to have these available on our website in about 2-3 weeks!
@VantagePointArmoryАй бұрын
If you originally purchased a Gen 1 model, a Gen 2 replacement will be shipped out to you this week. Otherwise they will be available for sell on our website in 2-3 weeks. Thank you for your support!
@Highgear145Ай бұрын
Vantage Point is an absolute great company for addressing these issues...I can't wait to get more gun models for the Streamlight...I just got my M18 version and I love it
@VantagePointArmoryАй бұрын
Thank you so much for your kind words and support! We're thrilled to hear that you're enjoying the M18 version. Stay tuned, as we are continuously working on expanding our range to include more models. Your enthusiasm keeps us motivated to deliver the best products possible. If you have any questions or need further assistance, don't hesitate to reach out.
@3wheelmannc860Ай бұрын
Very nice upgrade. Do you know of a holster company for the PX4 Storm Compact Carry and your comp? What about for the same gun with comp and light? The website only lists comp/light for full size vs. the compact used in the vid. above. Thanks.
@carlbeveridge384Ай бұрын
@@3wheelmannc860 JM Custom Kydex.
@VantagePointArmoryАй бұрын
Thanks for reaching out - we appreciate your support! Check out DME Holsters - they offer holsters for our the Px4 with the TLR7-Sub and our comp. dmeholsters.com/product/vantage-point-armory-px4-compensator-holsters/
@carlbeveridge384Ай бұрын
Have a Gen 1 I haven’t even mounted because of concerns expressed. I guess I’m out of luck. Not a word about helping out Gen 1 customers who own a junk, dangerous compensator. Not happy camper!!
@surfacegr1nder705Ай бұрын
We are replacing everyone’s unit who bought one. You should be getting email and a replacement in the mail.
@carlbeveridge384Ай бұрын
@@surfacegr1nder705 Thanks for your timely response and backing your product!
@VantagePointArmoryАй бұрын
We are offering a free replacement for the Gen 1 compensator with our improved Gen 2 model. Your satisfaction is our top priority, and we're here to help make this transition as smooth as possible. You should have recently received an email regarding your replacement - please reach out with any questions. Please discard your Gen 1 comp. Thanks Carl!
@SuperStriker75Ай бұрын
So I have the Gen 1 comp and haven't been able to shoot it yet, should I just get rid of it for the Gen 2? If so am I out 400 bucks or is there some way for me to swap it out? I'm a little hesitant to shoot it after seeing this lol.
@surfacegr1nder705Ай бұрын
We are replacing everyone’s unit. You should be getting a email notification and a new unit in the mail.
@SuperStriker75Ай бұрын
@@surfacegr1nder705Sweet, thanks for the fast response!
@JonnieHammaStixАй бұрын
@@surfacegr1nder705 what if I bought one through LTT? will they provide the replacement or will they be giving you our info for replacements?
@surfacegr1nder705Ай бұрын
@@JonnieHammaStix if you bought it thru LTT we have your info. You will be getting notification and package in the mail.
@VantagePointArmoryАй бұрын
We are offering a free replacement for the Gen 1 compensator with our improved Gen 2 model. Your satisfaction is our top priority, and we're here to help make this transition as smooth as possible. You should have recently received an email regarding your replacement - please reach out with any questions. Please discard your Gen 1 comp.
@josephsaint2652Ай бұрын
I assume other models are in the works for more popular brands, but are there any plans for a compensator for the Beretta APX A1?
@surfacegr1nder705Ай бұрын
I have been looking into it and it’s on the list. It will only be compatible with the A1 frame. That much I do know at this point. The A1 Pic rail is more robust and not in the same location as the OG.
@logdog4010Ай бұрын
Where the px4 compact one go tho
@surfacegr1nder705Ай бұрын
It won’t be long. We have made some upgrades that take care of the screw problem. Stay tuned.
What happened to the quick release system? When will this be available?
@surfacegr1nder705Ай бұрын
My opinion, this is quick release. The spring release that comes with the Surefire light can be used for this unit but we recommend locking bar with wedge block.
@Highgear145Ай бұрын
@@surfacegr1nder705 The Surefire X300A has a terrible fit on the P320 without some kind modification, I had to a piece of velcro on the back of the light the get a tight fit
@jasonmcclish2580Ай бұрын
Are you planning any other models like vp 9 ,Springfield hellcat or sig p365? Would love to see one for the hellcat. Another thing about your comps that nobody talks about at all. Is that they are standoff devices. Don't understand why no one talks about it. To me that is one of the most important features. Well anyways, thanks for your time. Stay safe and God Bless.
@surfacegr1nder705Ай бұрын
365 Macro is slated next.
@kennylai3327Ай бұрын
Oh my god. U guys are the best company. We need comp for Streamlight, pls.
@VantagePointArmoryАй бұрын
We appreciate your support! We are working on some streamlight models now. Stay tuned!
@nojoy7238Ай бұрын
I have one on a full size 9mm without the light and it def works. You just have to keep an eye on heat. But it makes the gun super light recoiling.
@VantagePointArmoryАй бұрын
We appreciate your support!
@billyloftis2767Ай бұрын
How long until we see them without the light mount just the compensator
@VantagePointArmoryАй бұрын
Thanks for reaching out Billy! We currently have rail-mounted models available for the Beretta Px4 Compact and Full. We are planning to launch a Rail-Mounted Comp for the P365 and P320. More to come - stay tuned!
@Zale180Ай бұрын
Walther PDP compact?
@VantagePointArmoryАй бұрын
Thanks for reaching out! Yes, the Walther PDP Compact is in our design lineup. Information regarding launch date will be announced once we are closer to completion.
@jerryhill3272Ай бұрын
Patiently waiting for my Hk models!
@VantagePointArmoryАй бұрын
We appreciate your interest in our product! While we don't have anything in the immediate design lineup for HK....our design team has this feedback on their design board. Thank you!
@gorrilla19Ай бұрын
S&W 10mm please
@VantagePointArmoryАй бұрын
Thank you for your feedback - I will pass this along to our design team and see if this is a model we can add to our design lineup. Thank you!
@mahaphillyАй бұрын
need a different recoil spring w/ comp and light? or can you run it ok just fine without a DPM kit, etc?
@surfacegr1nder705Ай бұрын
You should be able to run fine. I don’t see any reason that it would interfere with the action
@nojoy72382 ай бұрын
had a little bit of trouble. but im sure the more i do it the easier it will get. [edit] I got a better torque screwdriver. after setting it to 6in/lbs the screws went flush to the surface of the comp. Used blue locktite but will get green. After 100 rounds I can def feel the difference. I put it on a full size 9mm without the light attachment. Looks cool as heck. Can't wait to try it some more. Great product!
@VantagePointArmory2 ай бұрын
We appreciate your support! Please feel free to give us a call at (260) 478-8722 with any further questions....we would love to provide any additional guidance that would be helpful.
@VantagePointArmory2 ай бұрын
We appreciate your support! Please let us know if you have any questions. As a note, we do not recommend forcing the compensator onto the rail if it does not seem like a proper fit (Px4 molds may vary so the rail-mounted compensator may not be a perfect fit depending on the Px4 you have and what mold was used to make it at the factory). If this were to be the case, we recommend customers contact us and we can assist them with this fitment issue. Thanks again!
@nojoy72382 ай бұрын
Sorry I should have specified, I had trouble getting the screws flush. The compensator fit onto the rail perfectly.
@amoswhitwam26912 ай бұрын
Would love to see this for the SA Hellcat Pro. TLR1, TLR7, and TLR8
@VantagePointArmory2 ай бұрын
Thanks for reaching out! This model is on our tentative design list but we have several other compensators that will be in production prior to this. Stay tuned!
@AngelRamirez-qy1xe2 ай бұрын
do I have to have the flashlight with this spec
@VantagePointArmory2 ай бұрын
Thanks for reaching out, Angel! For the model shown in this video, yes you need the X300U-A light. However, we do offer a rail-mounted option on our website that does not require a light: vparmory.com/beretta-px4-storm-rail-mounted-compensator/
@robert51172 ай бұрын
Will there be a comp that attaches to the rail?
@VantagePointArmory2 ай бұрын
Thanks for reaching out, Robert! We do offer a compensator for the Px4 Full that attaches via the Rail: vparmory.com/beretta-px4-storm-rail-mounted-compensator/
@warlock10052 ай бұрын
Springfield XD's?
@VantagePointArmory2 ай бұрын
Thanks for reaching out! We don't have that in our immediate design lineup but I will pass your feedback onto our design team.
@jaredgann27692 ай бұрын
Hey VP Armory team, I'm newer to firearms as a general, but I have a PX 4 Storm Compact Carry coming in a few weeks. That being said, I was told I should be cleaning my firearm once a month (if you all have a different view in this/any input I'd appreciate that as well). I've seen a good few videos of your compensator being assembled onto this pistol, but I've yet to see how the comp impacts the cleaning process/disassembly. Are there any extra precautions that need to be taken, or any changes that need to be made to the cleaning process after installing your compensator? Thanks for your time and assistance, Jared G.
@VantagePointArmory2 ай бұрын
Hey Jared - thanks for reaching out! Can you please share your contact info? We would love to give you a call to chat about this and answer any questions. Thanks!
@MattByrne2 ай бұрын
I'd buy again if you offered the px4 gsd no light version in Sniper Gray.
@VantagePointArmory2 ай бұрын
Thanks for reaching out, Matt! We appreciate your interest in our product and have passed your feedback along to our design team. Please don't hesitate to reach out if you have any questions.
@MattByrne2 ай бұрын
Dang, now i need a new custom holster! I'm not interested in a light, so the comp only for my px4 is an amazing option. Not sure how I'll holster it securely though lol
@VantagePointArmory2 ай бұрын
Thanks for reaching out, Matt! For the Beretta Px4 Storm Rail-Mounted Compensator Full or Compact - a custom holster is required, or Apply Heat to Modify Existing Holster for PX4 Fullsize. Let us know if you have any other questions!
@SSS-qg7sh2 ай бұрын
Great idea but seems like a lot of work to take the slide off.
@lytelllytell75762 ай бұрын
Would your Glock version work with the Springfield Echelon?
@Highgear1452 ай бұрын
Did you guys cancel the Sig P320 version?
@VantagePointArmory2 ай бұрын
Thanks for reaching out! No it is still in the pipeline. We will release more info soon about the new models coming out and their expected release dates.
@_JimS3 ай бұрын
From the reviews of your comps on KZbin it appears you have a great product here. I'd like to throw my hat in the suggestion arena for a comp for a Springfield XDm Elite 3.8" 10mm ....t can use one, in fact all 10mm can use them...Lol! Thanks Guys!
@VantagePointArmory2 ай бұрын
Thanks for reaching out, Jim! We don't currently have those models in our production lineup, but I will pass your feedback along to our design team.
@_JimS2 ай бұрын
@@VantagePointArmory Tanks for the response.
@kyleherman843 ай бұрын
All of the. Streamlight models , SureFire xc1 , olight mini valkyrie Sig model, Springfield, and smith&wesson firearms
@VantagePointArmory3 ай бұрын
Thanks for reaching out, Kyle! We have several new models launching soon that are configured with different weapon lights for different firearms. Stay tuned for updates shortly!
@user-sj5px6qd5v3 ай бұрын
Shake a leg guys..ya said you were coming out with more models
@VantagePointArmory3 ай бұрын
Thanks for reaching out! We appreciate your patience. We have several new models in the development stage right now that are nearing completion and will be ready to go to market soon. We conduct thorough testing before taking new products to market. If you follow along our Facebook or X account, you can stay in the know about our latest product updates.
@surfacegr1nder7052 ай бұрын
lol, I know man I wish we could just crank these out but as our admin said above there more to the process than just design and machine. Bare with us.
@crazywhitepeople1003 ай бұрын
What I wonder the most is if this being a standoff muzzle device matters that much since, as of right now, it only works with the surefire x300, which is a long weapon light and probably already functions as a standoff device in the vast majority of cases.
@Policiaquintana3 ай бұрын
Fit .40 model? Compact
@VantagePointArmory3 ай бұрын
Thanks for reaching out! Yes we do sell a Rail-Mounted Comp model on our website that is compatible with the Px4 Storm Compact - 9 mm &.40 S&W. www.vparmory.com
@briantatro74933 ай бұрын
Any chance making one for sig 229 legion in the future ?
@VantagePointArmory3 ай бұрын
Thanks for reaching out! We don't have this in our immediate design lineup of new models but I will pass your feedback along to our design team. Thanks!
@avisliberis3 ай бұрын
Considering the size of the screws I think it make sense that you guys use purple loctite, not blue?
@VantagePointArmory3 ай бұрын
Thanks for reaching out! We recommend that all screws must have a medium-strength, medium-to-high temperature threadlocker applied in accordance with their manufacturer's instructions. We recommend a small application of Green Loctite 290 on each screw. Blue Loctite 246, 242, or 248, are also acceptable if you intend to remove the compensator more regularly, but these products are more likely to loosen under an aggressive firing schedule.
@sluttybuttАй бұрын
So green loctite if you never intend to clean your gun, or the ability to clean your gun mixed with your fancy comp dropping off intermittently. Cool choices
@chevyrunner88463 ай бұрын
TLR 1 HL model ?
@VantagePointArmory3 ай бұрын
Thanks for reaching out! At this time we do not have plans to make a compensator specific to the TLR 1 HL model. I will pass your feedback on to our design team. Thanks!
@thecajun063 ай бұрын
TLR 7 Sub compatible compensator for the Px4 Storm Compact Carry 2?
@michaelkerr96823 ай бұрын
It's available through LTT
@KKJae1873 ай бұрын
Do you have to have surefire light ? Or can you install just the compensator?
@jasonalesi91613 ай бұрын
How long for the Glock 17 gen 5?
@VantagePointArmory3 ай бұрын
Thanks for reaching out! This comp model is currently in our design lineup but it will likely be several weeks before launch. Follow along on our social media to stay in-the-know.
@danielmuriel-lopez98773 ай бұрын
What about a version for the CZ P-10C?
@VantagePointArmory3 ай бұрын
Thanks for reaching out! We do not have any plans currently for a comp model for the CZ P-10C, but I will pass your feedback along to our design team.
@TacticalMischief-zj8tn3 ай бұрын
PLEASE!!! Lengthen the comp to a Glock 34 length and add a second port! Better yet, have an optional Glock 17L length and add three+ ports. The current one doesn't compensate well. I like the PX4 full-size comp you made better because it works and it has 2 ports.